| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1423671332-24580-12-git-send-email-antoine.tenart@free-electrons.com>
Date: Wed, 11 Feb 2015 17:15:32 +0100
From: Antoine Tenart <antoine.tenart@...e-electrons.com>
To: sebastian.hesselbarth@...il.com
Cc: Antoine Tenart <antoine.tenart@...e-electrons.com>,
jszhang@...vell.com, zmxu@...vell.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 11/11] ARM: berlin: rework chip and system controller nodes for BG2Q
The chip and system controller nodes are now handled by the Berlin
controller mfd driver. Its sub-devices are then registered by the mfd
driver and let the drivers be probed properly, using their own
sub-nodes.
Rework the device tree to take this changes into account.
Signed-off-by: Antoine Tenart <antoine.tenart@...e-electrons.com>
---
arch/arm/boot/dts/berlin2q.dtsi | 70 ++++++++++++++++++++++++-----------------
1 file changed, 41 insertions(+), 29 deletions(-)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index e2f61f27944e..bd86d4121ec8 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -119,7 +119,7 @@
compatible = "marvell,berlin2-usb-phy";
reg = <0xa2f400 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x104 14>;
+ resets = <&chip_rst 0x104 14>;
status = "disabled";
};
@@ -137,7 +137,7 @@
compatible = "marvell,berlin2-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x104 12>;
+ resets = <&chip_rst 0x104 12>;
status = "disabled";
};
@@ -351,22 +351,30 @@
};
};
- chip: chip-control@...000 {
- compatible = "marvell,berlin2q-chip-ctrl";
- #clock-cells = <1>;
- #reset-cells = <2>;
+ chip: chip-controller@...000 {
+ compatible = "marvell,berlin2q-chip-ctrl", "syscon";
reg = <0xea0000 0x400>, <0xdd0170 0x10>;
+ #clock-cells = <1>;
clocks = <&refclk>;
clock-names = "refclk";
- twsi0_pmux: twsi0-pmux {
- groups = "G6";
- function = "twsi0";
+ soc_pinctrl: pin-controller {
+ compatible = "marvell,berlin2q-soc-pinctrl";
+
+ twsi0_pmux: twsi0-pmux {
+ groups = "G6";
+ function = "twsi0";
+ };
+
+ twsi1_pmux: twsi1-pmux {
+ groups = "G7";
+ function = "twsi1";
+ };
};
- twsi1_pmux: twsi1-pmux {
- groups = "G7";
- function = "twsi1";
+ chip_rst: reset {
+ compatible = "marvell,berlin2-reset";
+ #reset-cells = <2>;
};
};
@@ -517,28 +525,32 @@
};
};
- sysctrl: pin-controller@...0 {
- compatible = "marvell,berlin2q-system-ctrl";
+ sysctrl: system-controller@...0 {
+ compatible = "marvell,berlin2q-system-ctrl", "syscon";
reg = <0xd000 0x100>;
- uart0_pmux: uart0-pmux {
- groups = "GSM12";
- function = "uart0";
- };
+ sys_pinctrl: pin-controller {
+ compatible = "marvell,berlin2q-system-pinctrl";
- uart1_pmux: uart1-pmux {
- groups = "GSM14";
- function = "uart1";
- };
+ uart0_pmux: uart0-pmux {
+ groups = "GSM12";
+ function = "uart0";
+ };
- twsi2_pmux: twsi2-pmux {
- groups = "GSM13";
- function = "twsi2";
- };
+ uart1_pmux: uart1-pmux {
+ groups = "GSM14";
+ function = "uart1";
+ };
+
+ twsi2_pmux: twsi2-pmux {
+ groups = "GSM13";
+ function = "twsi2";
+ };
- twsi3_pmux: twsi3-pmux {
- groups = "GSM14";
- function = "twsi3";
+ twsi3_pmux: twsi3-pmux {
+ groups = "GSM14";
+ function = "twsi3";
+ };
};
};
--
2.3.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists