linux-kernel - Re: [PATCH 6/8] usb: dwc3: add ULPI interface support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20150211193419.GA28788@psi-dev26.jf.intel.com>
Date:	Wed, 11 Feb 2015 11:34:19 -0800
From:	David Cohen <david.a.cohen@...ux.intel.com>
To:	Heikki Krogerus <heikki.krogerus@...ux.intel.com>
Cc:	Felipe Balbi <balbi@...com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Baolu Lu <baolu.lu@...ux.intel.com>, linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH 6/8] usb: dwc3: add ULPI interface support

Hi Heikki,

On Fri, Jan 23, 2015 at 05:12:56PM +0200, Heikki Krogerus wrote:
> Registers DWC3's ULPI interface with the ULPI bus when it's
> available.
> 
> Signed-off-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
> ---
>  drivers/usb/dwc3/Kconfig  |   7 +++
>  drivers/usb/dwc3/Makefile |   4 ++
>  drivers/usb/dwc3/core.c   |   6 +++
>  drivers/usb/dwc3/core.h   |  13 ++++++
>  drivers/usb/dwc3/ulpi.c   | 112 ++++++++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 142 insertions(+)
>  create mode 100644 drivers/usb/dwc3/ulpi.c
> 
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 58b5b2c..cda82ad 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -11,6 +11,13 @@ config USB_DWC3
>  
>  if USB_DWC3
>  
> +config USB_DWC3_ULPI
> +	bool "Register ULPI PHY Interface"
> +	depends on USB_ULPI_BUS=y
> +	help
> +	  Select this if you have ULPI type PHY attached to your DWC3
> +	  controller.
> +
>  choice
>  	bool "DWC3 Mode Selection"
>  	default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
> diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
> index bb34fbc..2fc44e0 100644
> --- a/drivers/usb/dwc3/Makefile
> +++ b/drivers/usb/dwc3/Makefile
> @@ -16,6 +16,10 @@ ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
>  	dwc3-y				+= gadget.o ep0.o
>  endif
>  
> +ifneq ($(CONFIG_USB_DWC3_ULPI),)
> +	dwc3-y				+= ulpi.o
> +endif
> +
>  ifneq ($(CONFIG_DEBUG_FS),)
>  	dwc3-y				+= debugfs.o
>  endif
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index a8c9062..66cbf38 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -879,6 +879,10 @@ static int dwc3_probe(struct platform_device *pdev)
>  	platform_set_drvdata(pdev, dwc);
>  	dwc3_cache_hwparams(dwc);
>  
> +	ret = dwc3_ulpi_init(dwc);

If I understood correctly, this call will result in enumerating the phy
via ULPI bus, then registering the correct ULPI device.
Can you guarantee ULPI will be always accessible at this point if we
remove dwc3 module and load it again?

Br, David
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/