linux-kernel - [PATCH net-next v2 0/3] Adjust the settings about USB_RX_EARLY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1394712342-15778-141-Taiwan-albertk@realtek.com>
Date:	Thu, 12 Feb 2015 14:33:45 +0800
From:	Hayes Wang <hayeswang@...ltek.com>
To:	<netdev@...r.kernel.org>
CC:	<nic_swsd@...ltek.com>, <linux-kernel@...r.kernel.org>,
	<linux-usb@...r.kernel.org>, Hayes Wang <hayeswang@...ltek.com>
Subject: [PATCH net-next v2 0/3] Adjust the settings about USB_RX_EARLY_AGG

v2:
For patch #1, replace

	u32 ocp_data;
	ocp_data = tp->coalesce / 8;

with

	u32 ocp_data = tp->coalesce / 8;

And replace

	struct net_device *dev = tp->netdev;
	u32 ocp_data;
	ocp_data = (agg_buf_sz - dev->mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4;

with

	u32 mtu = tp->netdev->mtu;
	u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4;

Use *switch* statement to replace the checking of *if*.

v1:
The USB_RX_EARLY_AGG contains timeout and size. Separate them, and
they could be set independently. Then, the ethtool could be used to
change the timeout according to situation of the platform.

Hayes Wang (3):
  r8152: separate USB_RX_EARLY_AGG
  r8152: change rx early size when the mtu is changed
  r8152: support setting rx coalesce

 drivers/net/usb/r8152.c | 128 ++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 101 insertions(+), 27 deletions(-)

-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/