| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1423750042-6535-7-git-send-email-tomeu.vizoso@collabora.com>
Date: Thu, 12 Feb 2015 15:06:22 +0100
From: Tomeu Vizoso <tomeu.vizoso@...labora.com>
To: linux-tegra@...r.kernel.org
Cc: Javier Martinez Canillas <javier.martinez@...labora.co.uk>,
Mikko Perttunen <mikko.perttunen@...si.fi>,
Mikko Perttunen <mperttunen@...dia.com>,
Tomeu Vizoso <tomeu.vizoso@...labora.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Stephen Warren <swarren@...dotorg.org>,
Thierry Reding <thierry.reding@...il.com>,
Alexandre Courbot <gnurou@...il.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v6 06/15] of: Add Tegra124 EMC bindings
From: Mikko Perttunen <mperttunen@...dia.com>
Add binding documentation for the nvidia,tegra124-emc device tree node.
Signed-off-by: Mikko Perttunen <mperttunen@...dia.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@...labora.com>
---
v5: * Add a short description for each of the register properties
v4: * Remove mandatory naming of the timings subnode
* Remove constraint on the unit-address of the timings and timing subnodes
* Add some more information about nvidia,emc-configuration
* Make the example complete
v2: * Specify the unit addresses for the timings and timing nodes
---
.../bindings/memory-controllers/tegra-emc.txt | 379 +++++++++++++++++++++
1 file changed, 379 insertions(+)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt b/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
new file mode 100644
index 0000000..da923b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
@@ -0,0 +1,379 @@
+NVIDIA Tegra124 SoC EMC (external memory controller)
+====================================================
+
+Required properties :
+- compatible : Should be "nvidia,tegra124-emc".
+- reg : physical base address and length of the controller's registers.
+- nvidia,memory-controller : phandle of the MC driver.
+
+The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in
+register PMC_STRAPPING_OPT_A), with its unit address being its RAM_CODE.
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for.
+
+Each "emc-timings" node should contain a "timing" subnode for every supported EMC clock rate. The
+"timing" subnodes should have the clock rate in Hz as their unit address.
+
+Required properties for "timing" nodes :
+- clock-frequency : Should contain the memory clock rate in Hz.
+- The following properties contain EMC timing characterization values (specified in the board
+documentation) :
+ - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG
+ - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2
+ - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3
+ - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL
+ - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0
+ - nvidia,emc-cfg : EMC_CFG
+ - nvidia,emc-cfg-2 : EMC_CFG_2
+ - nvidia,emc-cfg-dig-dll : EMC_CFG_DIG_DLL
+ - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL
+ - nvidia,emc-mode-1 : Mode Register 1
+ - nvidia,emc-mode-2 : Mode Register 2
+ - nvidia,emc-mode-4 : Mode Register 4
+ - nvidia,emc-mode-reset : Mode Register 0
+ - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT
+ - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL
+ - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2
+ - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT
+ - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL
+- nvidia,emc-configuration : EMC timing characterization data. These are the registers (see section
+"15.6.2 EMC Registers" in the TRM) whose values need to be specified, according to the board
+documentation:
+
+ EMC_RC
+ EMC_RFC
+ EMC_RFC_SLR
+ EMC_RAS
+ EMC_RP
+ EMC_R2W
+ EMC_W2R
+ EMC_R2P
+ EMC_W2P
+ EMC_RD_RCD
+ EMC_WR_RCD
+ EMC_RRD
+ EMC_REXT
+ EMC_WEXT
+ EMC_WDV
+ EMC_WDV_MASK
+ EMC_QUSE
+ EMC_QUSE_WIDTH
+ EMC_IBDLY
+ EMC_EINPUT
+ EMC_EINPUT_DURATION
+ EMC_PUTERM_EXTRA
+ EMC_PUTERM_WIDTH
+ EMC_PUTERM_ADJ
+ EMC_CDB_CNTL_1
+ EMC_CDB_CNTL_2
+ EMC_CDB_CNTL_3
+ EMC_QRST
+ EMC_QSAFE
+ EMC_RDV
+ EMC_RDV_MASK
+ EMC_REFRESH
+ EMC_BURST_REFRESH_NUM
+ EMC_PRE_REFRESH_REQ_CNT
+ EMC_PDEX2WR
+ EMC_PDEX2RD
+ EMC_PCHG2PDEN
+ EMC_ACT2PDEN
+ EMC_AR2PDEN
+ EMC_RW2PDEN
+ EMC_TXSR
+ EMC_TXSRDLL
+ EMC_TCKE
+ EMC_TCKESR
+ EMC_TPD
+ EMC_TFAW
+ EMC_TRPAB
+ EMC_TCLKSTABLE
+ EMC_TCLKSTOP
+ EMC_TREFBW
+ EMC_FBIO_CFG6
+ EMC_ODT_WRITE
+ EMC_ODT_READ
+ EMC_FBIO_CFG5
+ EMC_CFG_DIG_DLL
+ EMC_CFG_DIG_DLL_PERIOD
+ EMC_DLL_XFORM_DQS0
+ EMC_DLL_XFORM_DQS1
+ EMC_DLL_XFORM_DQS2
+ EMC_DLL_XFORM_DQS3
+ EMC_DLL_XFORM_DQS4
+ EMC_DLL_XFORM_DQS5
+ EMC_DLL_XFORM_DQS6
+ EMC_DLL_XFORM_DQS7
+ EMC_DLL_XFORM_DQS8
+ EMC_DLL_XFORM_DQS9
+ EMC_DLL_XFORM_DQS10
+ EMC_DLL_XFORM_DQS11
+ EMC_DLL_XFORM_DQS12
+ EMC_DLL_XFORM_DQS13
+ EMC_DLL_XFORM_DQS14
+ EMC_DLL_XFORM_DQS15
+ EMC_DLL_XFORM_QUSE0
+ EMC_DLL_XFORM_QUSE1
+ EMC_DLL_XFORM_QUSE2
+ EMC_DLL_XFORM_QUSE3
+ EMC_DLL_XFORM_QUSE4
+ EMC_DLL_XFORM_QUSE5
+ EMC_DLL_XFORM_QUSE6
+ EMC_DLL_XFORM_QUSE7
+ EMC_DLL_XFORM_ADDR0
+ EMC_DLL_XFORM_ADDR1
+ EMC_DLL_XFORM_ADDR2
+ EMC_DLL_XFORM_ADDR3
+ EMC_DLL_XFORM_ADDR4
+ EMC_DLL_XFORM_ADDR5
+ EMC_DLL_XFORM_QUSE8
+ EMC_DLL_XFORM_QUSE9
+ EMC_DLL_XFORM_QUSE10
+ EMC_DLL_XFORM_QUSE11
+ EMC_DLL_XFORM_QUSE12
+ EMC_DLL_XFORM_QUSE13
+ EMC_DLL_XFORM_QUSE14
+ EMC_DLL_XFORM_QUSE15
+ EMC_DLI_TRIM_TXDQS0
+ EMC_DLI_TRIM_TXDQS1
+ EMC_DLI_TRIM_TXDQS2
+ EMC_DLI_TRIM_TXDQS3
+ EMC_DLI_TRIM_TXDQS4
+ EMC_DLI_TRIM_TXDQS5
+ EMC_DLI_TRIM_TXDQS6
+ EMC_DLI_TRIM_TXDQS7
+ EMC_DLI_TRIM_TXDQS8
+ EMC_DLI_TRIM_TXDQS9
+ EMC_DLI_TRIM_TXDQS10
+ EMC_DLI_TRIM_TXDQS11
+ EMC_DLI_TRIM_TXDQS12
+ EMC_DLI_TRIM_TXDQS13
+ EMC_DLI_TRIM_TXDQS14
+ EMC_DLI_TRIM_TXDQS15
+ EMC_DLL_XFORM_DQ0
+ EMC_DLL_XFORM_DQ1
+ EMC_DLL_XFORM_DQ2
+ EMC_DLL_XFORM_DQ3
+ EMC_DLL_XFORM_DQ4
+ EMC_DLL_XFORM_DQ5
+ EMC_DLL_XFORM_DQ6
+ EMC_DLL_XFORM_DQ7
+ EMC_XM2CMDPADCTRL
+ EMC_XM2CMDPADCTRL4
+ EMC_XM2CMDPADCTRL5
+ EMC_XM2DQSPADCTRL2
+ EMC_XM2DQPADCTRL2
+ EMC_XM2DQPADCTRL3
+ EMC_XM2CLKPADCTRL
+ EMC_XM2CLKPADCTRL2
+ EMC_XM2COMPPADCTRL
+ EMC_XM2VTTGENPADCTRL
+ EMC_XM2VTTGENPADCTRL2
+ EMC_XM2VTTGENPADCTRL3
+ EMC_XM2DQSPADCTRL3
+ EMC_XM2DQSPADCTRL4
+ EMC_XM2DQSPADCTRL5
+ EMC_XM2DQSPADCTRL6
+ EMC_DSR_VTTGEN_DRV
+ EMC_TXDSRVTTGEN
+ EMC_FBIO_SPARE
+ EMC_ZCAL_INTERVAL
+ EMC_ZCAL_WAIT_CNT
+ EMC_MRS_WAIT_CNT
+ EMC_MRS_WAIT_CNT2
+ EMC_CTT
+ EMC_CTT_DURATION
+ EMC_CFG_PIPE
+ EMC_DYN_SELF_REF_CONTROL
+ EMC_QPOP
+
+Example SoC include file:
+
+/ {
+ emc@0,7001b000 {
+ compatible = "nvidia,tegra124-emc";
+ reg = <0x0 0x7001b000 0x0 0x1000>;
+
+ nvidia,memory-controller = <&mc>;
+ };
+};
+
+Example board file:
+
+/ {
+ emc@0,7001b000 {
+ emc-timings-3 {
+ nvidia,ram-code = <3>;
+
+ timing-12750000 {
+ clock-frequency = <12750000>;
+
+ nvidia,emc-zcal-cnt-long = <0x00000042>;
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-ctt-term-ctrl = <0x00000802>;
+ nvidia,emc-cfg = <0x73240000>;
+ nvidia,emc-cfg-2 = <0x000008c5>;
+ nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+ nvidia,emc-cfg-dig-dll = <0x002c0068>;
+ nvidia,emc-bgbias-ctl0 = <0x00000008>;
+ nvidia,emc-auto-cal-config = <0xa1430000>;
+ nvidia,emc-auto-cal-config2 = <0x00000000>;
+ nvidia,emc-auto-cal-config3 = <0x00000000>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200008>;
+ nvidia,emc-mode-4 = <0x00000000>;
+
+ nvidia,emc-configuration = <
+ 0x00000000 /* EMC_RC */
+ 0x00000003 /* EMC_RFC */
+ 0x00000000 /* EMC_RFC_SLR */
+ 0x00000000 /* EMC_RAS */
+ 0x00000000 /* EMC_RP */
+ 0x00000004 /* EMC_R2W */
+ 0x0000000a /* EMC_W2R */
+ 0x00000003 /* EMC_R2P */
+ 0x0000000b /* EMC_W2P */
+ 0x00000000 /* EMC_RD_RCD */
+ 0x00000000 /* EMC_WR_RCD */
+ 0x00000003 /* EMC_RRD */
+ 0x00000003 /* EMC_REXT */
+ 0x00000000 /* EMC_WEXT */
+ 0x00000006 /* EMC_WDV */
+ 0x00000006 /* EMC_WDV_MASK */
+ 0x00000006 /* EMC_QUSE */
+ 0x00000002 /* EMC_QUSE_WIDTH */
+ 0x00000000 /* EMC_IBDLY */
+ 0x00000005 /* EMC_EINPUT */
+ 0x00000005 /* EMC_EINPUT_DURATION */
+ 0x00010000 /* EMC_PUTERM_EXTRA */
+ 0x00000003 /* EMC_PUTERM_WIDTH */
+ 0x00000000 /* EMC_PUTERM_ADJ */
+ 0x00000000 /* EMC_CDB_CNTL_1 */
+ 0x00000000 /* EMC_CDB_CNTL_2 */
+ 0x00000000 /* EMC_CDB_CNTL_3 */
+ 0x00000004 /* EMC_QRST */
+ 0x0000000c /* EMC_QSAFE */
+ 0x0000000d /* EMC_RDV */
+ 0x0000000f /* EMC_RDV_MASK */
+ 0x00000060 /* EMC_REFRESH */
+ 0x00000000 /* EMC_BURST_REFRESH_NUM */
+ 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+ 0x00000002 /* EMC_PDEX2WR */
+ 0x00000002 /* EMC_PDEX2RD */
+ 0x00000001 /* EMC_PCHG2PDEN */
+ 0x00000000 /* EMC_ACT2PDEN */
+ 0x00000007 /* EMC_AR2PDEN */
+ 0x0000000f /* EMC_RW2PDEN */
+ 0x00000005 /* EMC_TXSR */
+ 0x00000005 /* EMC_TXSRDLL */
+ 0x00000004 /* EMC_TCKE */
+ 0x00000005 /* EMC_TCKESR */
+ 0x00000004 /* EMC_TPD */
+ 0x00000000 /* EMC_TFAW */
+ 0x00000000 /* EMC_TRPAB */
+ 0x00000005 /* EMC_TCLKSTABLE */
+ 0x00000005 /* EMC_TCLKSTOP */
+ 0x00000064 /* EMC_TREFBW */
+ 0x00000000 /* EMC_FBIO_CFG6 */
+ 0x00000000 /* EMC_ODT_WRITE */
+ 0x00000000 /* EMC_ODT_READ */
+ 0x106aa298 /* EMC_FBIO_CFG5 */
+ 0x002c00a0 /* EMC_CFG_DIG_DLL */
+ 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+ 0x00064000 /* EMC_DLL_XFORM_DQS0 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS1 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS2 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS3 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS4 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS5 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS6 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS7 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS8 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS9 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS10 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS11 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS12 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS13 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS14 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS15 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+ 0x10000280 /* EMC_XM2CMDPADCTRL */
+ 0x00000000 /* EMC_XM2CMDPADCTRL4 */
+ 0x00111111 /* EMC_XM2CMDPADCTRL5 */
+ 0x0130b118 /* EMC_XM2DQSPADCTRL2 */
+ 0x00000000 /* EMC_XM2DQPADCTRL2 */
+ 0x00000000 /* EMC_XM2DQPADCTRL3 */
+ 0x77ffc081 /* EMC_XM2CLKPADCTRL */
+ 0x00000e0e /* EMC_XM2CLKPADCTRL2 */
+ 0x81f1f108 /* EMC_XM2COMPPADCTRL */
+ 0x07070004 /* EMC_XM2VTTGENPADCTRL */
+ 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+ 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+ 0x51451400 /* EMC_XM2DQSPADCTRL3 */
+ 0x00514514 /* EMC_XM2DQSPADCTRL4 */
+ 0x00514514 /* EMC_XM2DQSPADCTRL5 */
+ 0x51451400 /* EMC_XM2DQSPADCTRL6 */
+ 0x0000003f /* EMC_DSR_VTTGEN_DRV */
+ 0x00000007 /* EMC_TXDSRVTTGEN */
+ 0x00000000 /* EMC_FBIO_SPARE */
+ 0x00000000 /* EMC_ZCAL_INTERVAL */
+ 0x00000042 /* EMC_ZCAL_WAIT_CNT */
+ 0x000e000e /* EMC_MRS_WAIT_CNT */
+ 0x000e000e /* EMC_MRS_WAIT_CNT2 */
+ 0x00000000 /* EMC_CTT */
+ 0x00000003 /* EMC_CTT_DURATION */
+ 0x0000f2f3 /* EMC_CFG_PIPE */
+ 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+ 0x0000000a /* EMC_QPOP */
+ >;
+ };
+ };
+ };
+};
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists