| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1423709245-8142-1-git-send-email-wenyou.yang@atmel.com>
Date: Thu, 12 Feb 2015 10:47:25 +0800
From: Wenyou Yang <wenyou.yang@...el.com>
To: <nicolas.ferre@...el.com>, <linux@...im.org.za>,
<linux@....linux.org.uk>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <sylvain.rochet@...secur.com>,
<alexandre.belloni@...e-electrons.com>,
<patrice.vilchez@...el.com>, <sergei.shtylyov@...entembedded.com>,
<mark.rutland@....com>, <lorenzo.pieralisi@....com>,
<wenyou.yang@...el.com>
Subject: [PATCH 3/6] pm: at91: standby mode uses the same sram function as suspend to memory mode
To simply the PM code, the suspend to standby mode uses the same sram function
as the suspend to memory mode, running in the internal SRAM, instead of the
respective code for each mode.
For the suspend to standby mode, the master clock doesn't switch to the slow
clock, and PLLA and the main oscillator doesn't turn off as well.
Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
---
arch/arm/mach-at91/pm.c | 85 +++++++++++++++++--------------------
arch/arm/mach-at91/pm.h | 8 ++++
arch/arm/mach-at91/pm_slowclock.S | 25 ++++++++++-
3 files changed, 71 insertions(+), 47 deletions(-)
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 9feee81..d03d6a7 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -140,62 +140,55 @@ extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
void __iomem *ramc1, int memctrl);
extern u32 at91_slow_clock_sz;
+static void at91_pm_suspend(suspend_state_t state)
+{
+ unsigned int pm_data = at91_pm_data.memctrl;
+
+ pm_data |= (state == PM_SUSPEND_MEM) ?
+ AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
+
+ slow_clock(at91_pmc_base, at91_ramc_base[0],
+ at91_ramc_base[1], pm_data);
+}
+
static int at91_pm_enter(suspend_state_t state)
{
at91_pinctrl_gpio_suspend();
switch (state) {
+ /*
+ * Suspend-to-RAM is like STANDBY plus slow clock mode, so
+ * drivers must suspend more deeply, the master clock switches
+ * to the clk32k and turns off the main oscillator
+ */
+ case PM_SUSPEND_MEM:
/*
- * Suspend-to-RAM is like STANDBY plus slow clock mode, so
- * drivers must suspend more deeply: only the master clock
- * controller may be using the main oscillator.
+ * Ensure that clocks are in a valid state.
*/
- case PM_SUSPEND_MEM:
- /*
- * Ensure that clocks are in a valid state.
- */
- if (!at91_pm_verify_clocks())
- goto error;
-
- /*
- * Enter slow clock mode by switching over to clk32k and
- * turning off the main oscillator; reverse on wakeup.
- */
- if (slow_clock) {
- slow_clock(at91_pmc_base, at91_ramc_base[0],
- at91_ramc_base[1],
- at91_pm_data.memctrl);
- break;
- } else {
- pr_info("AT91: PM - no slow clock mode enabled ...\n");
- /* FALLTHROUGH leaving master clock alone */
- }
+ if (!at91_pm_verify_clocks())
+ goto error;
- /*
- * STANDBY mode has *all* drivers suspended; ignores irqs not
- * marked as 'wakeup' event sources; and reduces DRAM power.
- * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
- * nothing fancy done with main or cpu clocks.
- */
- case PM_SUSPEND_STANDBY:
- /*
- * NOTE: the Wait-for-Interrupt instruction needs to be
- * in icache so no SDRAM accesses are needed until the
- * wakeup IRQ occurs and self-refresh is terminated.
- * For ARM 926 based chips, this requirement is weaker
- * as at91sam9 can access a RAM in self-refresh mode.
- */
- if (at91_pm_standby)
- at91_pm_standby();
- break;
+ at91_pm_suspend(state);
- case PM_SUSPEND_ON:
- cpu_do_idle();
- break;
+ break;
- default:
- pr_debug("AT91: PM - bogus suspend state %d\n", state);
- goto error;
+ /*
+ * STANDBY mode has *all* drivers suspended; ignores irqs not
+ * marked as 'wakeup' event sources; and reduces DRAM power.
+ * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
+ * nothing fancy done with main or cpu clocks.
+ */
+ case PM_SUSPEND_STANDBY:
+ at91_pm_suspend(state);
+ break;
+
+ case PM_SUSPEND_ON:
+ cpu_do_idle();
+ break;
+
+ default:
+ pr_debug("AT91: PM - bogus suspend state %d\n", state);
+ goto error;
}
error:
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index d2c8996..4eef436 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -15,6 +15,14 @@
#include <mach/at91_ramc.h>
+#define AT91_PM_MEMTYPE_MASK 0x0f
+
+#define AT91_PM_MODE_OFFSET 4
+#define AT91_PM_MODE_MASK 0x01
+#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
+
+#define AT91_PM_SLOW_CLOCK 0x01
+
#ifdef CONFIG_PM
extern void at91_pm_set_standby(void (*at91_standby)(void));
#else
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 6fdf221..bead23e 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -15,6 +15,7 @@
#include <linux/clk/at91_pmc.h>
#include <mach/hardware.h>
#include <mach/at91_ramc.h>
+#include "pm.h"
#define SRAMC_SELF_FRESH_ACTIVE 0x01
#define SRAMC_SELF_FRESH_EXIT 0x00
@@ -76,12 +77,22 @@ ENTRY(at91_slow_clock)
str r0, .pmc_base
str r1, .sramc_base
str r2, .sramc1_base
- str r3, .memtype
+
+ and r0, r3, #AT91_PM_MEMTYPE_MASK
+ str r0, .memtype
+
+ lsr r0, r3, #AT91_PM_MODE_OFFSET
+ and r0, r0, #AT91_PM_MODE_MASK
+ str r0, .pm_mode
/* Active the self-refresh mode */
mov r0, #SRAMC_SELF_FRESH_ACTIVE
bl at91_sramc_self_refresh
+ ldr r0, .pm_mode
+ tst r0, #AT91_PM_SLOW_CLOCK
+ beq skip_disable_main_clock
+
ldr pmc, .pmc_base
/* Save Master clock setting */
@@ -109,9 +120,18 @@ ENTRY(at91_slow_clock)
bic tmp1, tmp1, #AT91_PMC_MOSCEN
str tmp1, [pmc, #AT91_CKGR_MOR]
+skip_disable_main_clock:
+ ldr pmc, .pmc_base
+
/* Wait for interrupt */
mcr p15, 0, tmp1, c7, c0, 4
+ ldr r0, .pm_mode
+ tst r0, #AT91_PM_SLOW_CLOCK
+ beq skip_enable_main_clock
+
+ ldr pmc, .pmc_base
+
/* Turn on the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN
@@ -139,6 +159,7 @@ ENTRY(at91_slow_clock)
wait_mckrdy
+skip_enable_main_clock:
/* Exit the self-refresh mode */
mov r0, #SRAMC_SELF_FRESH_EXIT
bl at91_sramc_self_refresh
@@ -281,6 +302,8 @@ ENDPROC(at91_sramc_self_refresh)
.word 0
.memtype:
.word 0
+.pm_mode:
+ .word 0
.saved_mckr:
.word 0
.saved_pllar:
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists