| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1423845781-7480-8-git-send-email-antoine.tenart@free-electrons.com>
Date: Fri, 13 Feb 2015 17:43:01 +0100
From: Antoine Tenart <antoine.tenart@...e-electrons.com>
To: sebastian.hesselbarth@...il.com, mturquette@...aro.org,
sboyd@...eaurora.org
Cc: Antoine Tenart <antoine.tenart@...e-electrons.com>,
zmxu@...vell.com, jszhang@...vell.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 7/7] ARM: berlin: rework the clock node for BG2Q
With the introduction of the Berlin mfd controller driver, all drivers
previously sharing the chip and system controller nodes now have their
own sub-node.
Signed-off-by: Antoine Tenart <antoine.tenart@...e-electrons.com>
---
arch/arm/boot/dts/berlin2q.dtsi | 53 ++++++++++++++++++++++-------------------
1 file changed, 29 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index bd86d4121ec8..ca69dc26782f 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -66,7 +66,7 @@
sdhci0: sdhci@...000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
- clocks = <&chip CLKID_SDIO1XIN>;
+ clocks = <&chip_clk CLKID_SDIO1XIN>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -74,7 +74,7 @@
sdhci1: sdhci@...800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0800 0x200>;
- clocks = <&chip CLKID_SDIO1XIN>;
+ clocks = <&chip_clk CLKID_SDIO1XIN>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -83,7 +83,7 @@
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+ clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
clock-names = "io", "core";
status = "disabled";
};
@@ -104,7 +104,7 @@
local-timer@...600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
- clocks = <&chip CLKID_TWD>;
+ clocks = <&chip_clk CLKID_TWD>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -127,7 +127,7 @@
compatible = "chipidea,usb2";
reg = <0xa30000 0x10000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB2>;
+ clocks = <&chip_clk CLKID_USB2>;
phys = <&usb_phy2>;
phy-names = "usb-phy";
status = "disabled";
@@ -145,14 +145,14 @@
compatible = "marvell,berlin2-usb-phy";
reg = <0xb78000 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x104 13>;
+ resets = <&chip_rst 0x104 13>;
status = "disabled";
};
eth0: ethernet@...000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
- clocks = <&chip CLKID_GETH0>;
+ clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@@ -259,7 +259,7 @@
reg = <0x1400 0x100>;
interrupt-parent = <&aic>;
interrupts = <4>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi0_pmux>;
pinctrl-names = "default";
status = "disabled";
@@ -272,7 +272,7 @@
reg = <0x1800 0x100>;
interrupt-parent = <&aic>;
interrupts = <5>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi1_pmux>;
pinctrl-names = "default";
status = "disabled";
@@ -281,7 +281,7 @@
timer0: timer@...0 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
interrupts = <8>;
};
@@ -289,14 +289,14 @@
timer1: timer@...4 {
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
};
timer2: timer@...8 {
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -304,7 +304,7 @@
timer3: timer@...c {
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -312,7 +312,7 @@
timer4: timer@...0 {
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -320,7 +320,7 @@
timer5: timer@...4 {
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -328,7 +328,7 @@
timer6: timer@...8 {
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -336,7 +336,7 @@
timer7: timer@...c {
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -354,9 +354,14 @@
chip: chip-controller@...000 {
compatible = "marvell,berlin2q-chip-ctrl", "syscon";
reg = <0xea0000 0x400>, <0xdd0170 0x10>;
- #clock-cells = <1>;
- clocks = <&refclk>;
- clock-names = "refclk";
+
+ chip_clk: clock {
+ compatible = "marvell,berlin2q-clk";
+
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+ };
soc_pinctrl: pin-controller {
compatible = "marvell,berlin2q-soc-pinctrl";
@@ -382,7 +387,7 @@
compatible = "marvell,berlin2q-ahci", "generic-ahci";
reg = <0xe90000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
@@ -402,7 +407,7 @@
sata_phy: phy@...0a0 {
compatible = "marvell,berlin2q-sata-phy";
reg = <0xe900a0 0x200>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
#phy-cells = <1>;
@@ -421,7 +426,7 @@
compatible = "chipidea,usb2";
reg = <0xed0000 0x10000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB0>;
+ clocks = <&chip_clk CLKID_USB0>;
phys = <&usb_phy0>;
phy-names = "usb-phy";
status = "disabled";
@@ -431,7 +436,7 @@
compatible = "chipidea,usb2";
reg = <0xee0000 0x10000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB1>;
+ clocks = <&chip_clk CLKID_USB1>;
phys = <&usb_phy1>;
phy-names = "usb-phy";
status = "disabled";
--
2.3.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists