linux-kernel - [PATCH v4] dma: imx-sdma: switch to dynamic context mode after script loaded

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1423965635-13915-1-git-send-email-b38343@freescale.com>
Date:	Sun, 15 Feb 2015 10:00:35 +0800
From:	Robin Gong <b38343@...escale.com>
To:	<dan.j.williams@...el.com>, <vinod.koul@...el.com>
CC:	<dmaengine@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v4] dma: imx-sdma: switch to dynamic context mode after script loaded

Below comments got from Page4724 of Reference Manual of i.mx6q:
http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf

--"Static context mode should be used for the first channel called
after reset to ensure that the all context RAM for that channel is
initialized during the context SAVE phase when the channel is
done or yields. Subsequent calls to the same channel or
different channels may use any of the dynamic context modes.
This will ensure that all context locations for the bootload
channel are initialized, and prevent undefined values in context
RAM from being loaded during the context restore if the
channel is re-started later"

Unfortunately, the rule was broken by commit(5b28aa319bba96987316425a1131813d87cbab35)
.This patch just take them back.

Signed-off-by: Robin Gong <b38343@...escale.com>
---
 drivers/dma/imx-sdma.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index d0df198..644cfa0 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -531,6 +531,10 @@ static int sdma_run_channel0(struct sdma_engine *sdma)
 		dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
 	}
 
+	/* Set bits of CONFIG register with dynamic context switching */
+	if (readl(sdma->regs + SDMA_H_CONFIG) == 0)
+		writel_relaxed(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG);
+
 	return ret ? 0 : -ETIMEDOUT;
 }
 
@@ -1401,9 +1405,6 @@ static int sdma_init(struct sdma_engine *sdma)
 
 	writel_relaxed(ccb_phys, sdma->regs + SDMA_H_C0PTR);
 
-	/* Set bits of CONFIG register with given context switching mode */
-	writel_relaxed(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG);
-
 	/* Initializes channel's priorities */
 	sdma_set_channel_priority(&sdma->channel[0], 7);
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/