| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1424101581-22109-6-git-send-email-Emilian.Medve@Freescale.com>
Date: Mon, 16 Feb 2015 09:46:16 -0600
From: Emil Medve <Emilian.Medve@...escale.com>
To: <linuxppc-dev@...ts.ozlabs.org>, <linux-kernel@...r.kernel.org>
CC: Geoff Thorpe <Geoff.Thorpe@...escale.com>
Subject: [RFC v2 05/10] fsl_bman: Add self-tester
From: Geoff Thorpe <Geoff.Thorpe@...escale.com>
Change-Id: If1b44bb013addc1e855c73a4e6ff74bc8b6e4829
Signed-off-by: Geoff Thorpe <Geoff.Thorpe@...escale.com>
---
drivers/soc/freescale/Kconfig | 26 ++++
drivers/soc/freescale/Makefile | 8 +-
drivers/soc/freescale/bman.c | 16 +--
drivers/soc/freescale/bman_api.c | 14 +--
drivers/soc/freescale/bman_portal.c | 18 +--
drivers/soc/freescale/bman_priv.h | 2 +-
drivers/soc/freescale/bman_test.c | 56 +++++++++
drivers/soc/freescale/bman_test.h | 44 +++++++
drivers/soc/freescale/bman_test_api.c | 181 ++++++++++++++++++++++++++++
drivers/soc/freescale/bman_test_thresh.c | 196 +++++++++++++++++++++++++++++++
drivers/soc/freescale/dpaa_alloc.c | 2 +-
drivers/soc/freescale/dpaa_sys.h | 2 +-
drivers/soc/freescale/qman.c | 26 ++--
drivers/soc/freescale/qman_api.c | 18 +--
drivers/soc/freescale/qman_portal.c | 18 +--
drivers/soc/freescale/qman_priv.h | 2 +-
include/linux/fsl_bman.h | 10 +-
include/linux/fsl_qman.h | 18 +--
18 files changed, 582 insertions(+), 75 deletions(-)
create mode 100644 drivers/soc/freescale/bman_test.c
create mode 100644 drivers/soc/freescale/bman_test.h
create mode 100644 drivers/soc/freescale/bman_test_api.c
create mode 100644 drivers/soc/freescale/bman_test_thresh.c
diff --git a/drivers/soc/freescale/Kconfig b/drivers/soc/freescale/Kconfig
index 9329c5c..6786b94 100644
--- a/drivers/soc/freescale/Kconfig
+++ b/drivers/soc/freescale/Kconfig
@@ -47,6 +47,32 @@ config FSL_BMAN_CONFIG
linux image is running as a guest OS under the hypervisor, only one
guest OS ("the control plane") needs this option.
+config FSL_BMAN_TEST
+ tristate "BMan self-tests"
+ default n
+ ---help---
+ This option compiles self-test code for BMan.
+
+config FSL_BMAN_TEST_HIGH
+ bool "BMan high-level self-test"
+ depends on FSL_BMAN_TEST
+ default y
+ ---help---
+ This requires the presence of cpu-affine portals, and performs
+ high-level API testing with them (whichever portal(s) are affine to
+ the cpu(s) the test executes on).
+
+config FSL_BMAN_TEST_THRESH
+ bool "BMan threshold test"
+ depends on FSL_BMAN_TEST
+ default y
+ ---help---
+ Multi-threaded (SMP) test of BMan pool depletion. A pool is seeded
+ before multiple threads (one per cpu) create pool objects to track
+ depletion state changes. The pool is then drained to empty by a
+ "drainer" thread, and the other threads that they observe exactly
+ the depletion state changes that are expected.
+
endif # FSL_BMAN
config FSL_QMAN
diff --git a/drivers/soc/freescale/Makefile b/drivers/soc/freescale/Makefile
index 69be592..09f31b0 100644
--- a/drivers/soc/freescale/Makefile
+++ b/drivers/soc/freescale/Makefile
@@ -2,10 +2,14 @@
obj-$(CONFIG_FSL_DPA) += dpaa_alloc.o
obj-$(CONFIG_HAS_FSL_QBMAN) += qbman_driver.o
-# Bman
+# BMan
obj-$(CONFIG_FSL_BMAN) += bman_api.o
obj-$(CONFIG_FSL_BMAN_CONFIG) += bman.o bman_portal.o
+obj-$(CONFIG_FSL_BMAN_TEST) += bman_tester.o
+bman_tester-y = bman_test.o
+bman_tester-$(CONFIG_FSL_BMAN_TEST_API) += bman_test_api.o
+bman_tester-$(CONFIG_FSL_BMAN_TEST_THRESH) += bman_test_thresh.o
-# Qman
+# QMan
obj-$(CONFIG_FSL_QMAN) += qman_api.o qman_utils.o
obj-$(CONFIG_FSL_QMAN_CONFIG) += qman.o qman_portal.o
diff --git a/drivers/soc/freescale/bman.c b/drivers/soc/freescale/bman.c
index fba6ae0..66986f2 100644
--- a/drivers/soc/freescale/bman.c
+++ b/drivers/soc/freescale/bman.c
@@ -275,7 +275,7 @@ static int __init fsl_bman_init(struct device_node *node)
BUG_ON(!bm);
bm_node = node;
bm_get_version(bm, &id, &major, &minor);
- pr_info("Bman ver:%04x,%02x,%02x\n", id, major, minor);
+ pr_info("BMan ver:%04x,%02x,%02x\n", id, major, minor);
if ((major == 1) && (minor == 0)) {
bman_ip_rev = BMAN_REV10;
bman_pool_max = 64;
@@ -286,7 +286,7 @@ static int __init fsl_bman_init(struct device_node *node)
bman_ip_rev = BMAN_REV21;
bman_pool_max = 64;
} else {
- pr_warn("unknown Bman version, default to rev1.0\n");
+ pr_warn("unknown BMan version, default to rev1.0\n");
}
return 0;
@@ -330,7 +330,7 @@ static void log_edata_bits(u32 bit_count)
{
u32 i, j, mask = 0xffffffff;
- pr_warn("Bman ErrInt, EDATA:\n");
+ pr_warn("BMan ErrInt, EDATA:\n");
i = bit_count/32;
if (bit_count%32) {
i++;
@@ -351,13 +351,13 @@ static void log_additional_error_info(u32 isr_val, u32 ecsr_val)
ecir_val.ecir_raw = bm_in(ECIR);
/* Is portal info valid */
if (ecsr_val & PORTAL_ECSR_ERR) {
- pr_warn("Bman ErrInt: SWP id %d, numb %d, pid %d\n",
+ pr_warn("BMan ErrInt: SWP id %d, numb %d, pid %d\n",
ecir_val.info.portal_num, ecir_val.info.numb,
ecir_val.info.pid);
}
if (ecsr_val & (BM_EIRQ_SBEI|BM_EIRQ_MBEI)) {
eadr_val.eadr_raw = bm_in(EADR);
- pr_warn("Bman ErrInt: EADR Memory: %s, 0x%x\n",
+ pr_warn("BMan ErrInt: EADR Memory: %s, 0x%x\n",
error_mdata[eadr_val.info.memid].txt,
error_mdata[eadr_val.info.memid].addr_mask
& eadr_val.info.eadr);
@@ -365,7 +365,7 @@ static void log_additional_error_info(u32 isr_val, u32 ecsr_val)
}
}
-/* Bman interrupt handler */
+/* BMan interrupt handler */
static irqreturn_t bman_isr(int irq, void *ptr)
{
u32 isr_val, ier_val, ecsr_val, isr_mask, i;
@@ -379,14 +379,14 @@ static irqreturn_t bman_isr(int irq, void *ptr)
return IRQ_NONE;
for (i = 0; i < BMAN_HWE_COUNT; i++) {
if (bman_hwerr_txts[i].mask & isr_mask) {
- pr_warn("Bman ErrInt: %s\n", bman_hwerr_txts[i].txt);
+ pr_warn("BMan ErrInt: %s\n", bman_hwerr_txts[i].txt);
if (bman_hwerr_txts[i].mask & ecsr_val) {
log_additional_error_info(isr_mask, ecsr_val);
/* Re-arm error capture registers */
bm_out(ECSR, ecsr_val);
}
if (bman_hwerr_txts[i].mask & BMAN_ERRS_TO_UNENABLE) {
- pr_devel("Bman un-enabling error 0x%x\n",
+ pr_devel("BMan un-enabling error 0x%x\n",
bman_hwerr_txts[i].mask);
ier_val &= ~bman_hwerr_txts[i].mask;
bm_err_isr_enable_write(bm, ier_val);
diff --git a/drivers/soc/freescale/bman_api.c b/drivers/soc/freescale/bman_api.c
index ab16f16..7bb4840 100644
--- a/drivers/soc/freescale/bman_api.c
+++ b/drivers/soc/freescale/bman_api.c
@@ -66,8 +66,8 @@ struct bman_portal {
};
/* For an explanation of the locking, redirection, or affine-portal logic,
- * please consult the Qman driver for details. This is the same, only simpler
- * (no fiddly Qman-specific bits.) */
+ * please consult the QMan driver for details. This is the same, only simpler
+ * (no fiddly QMan-specific bits.) */
#ifdef CONFIG_FSL_DPA_PORTAL_SHARE
#define PORTAL_IRQ_LOCK(p, irqflags) \
do { \
@@ -118,7 +118,7 @@ static inline struct bman_portal *get_poll_portal(void)
#define put_poll_portal()
/* GOTCHA: this object type refers to a pool, it isn't *the* pool. There may be
- * more than one such object per Bman buffer pool, eg. if different users of the
+ * more than one such object per BMan buffer pool, eg. if different users of the
* pool are operating via different portals. */
struct bman_pool {
struct bman_pool_params params;
@@ -219,15 +219,15 @@ struct bman_portal *bman_create_portal(
__p->addr.addr_ce = config->addr_virt[DPA_PORTAL_CE];
__p->addr.addr_ci = config->addr_virt[DPA_PORTAL_CI];
if (bm_rcr_init(__p, bm_rcr_pvb, bm_rcr_cce)) {
- pr_err("Bman RCR initialisation failed\n");
+ pr_err("BMan RCR initialisation failed\n");
goto fail_rcr;
}
if (bm_mc_init(__p)) {
- pr_err("Bman MC initialisation failed\n");
+ pr_err("BMan MC initialisation failed\n");
goto fail_mc;
}
if (bm_isr_init(__p)) {
- pr_err("Bman ISR initialisation failed\n");
+ pr_err("BMan ISR initialisation failed\n");
goto fail_isr;
}
portal->pools = kmalloc(2 * sizeof(*pools), GFP_KERNEL);
@@ -273,7 +273,7 @@ struct bman_portal *bman_create_portal(
/* Need RCR to be empty before continuing */
ret = bm_rcr_get_fill(__p);
if (ret) {
- pr_err("Bman RCR unclean\n");
+ pr_err("BMan RCR unclean\n");
goto fail_rcr_empty;
}
/* Success */
diff --git a/drivers/soc/freescale/bman_portal.c b/drivers/soc/freescale/bman_portal.c
index 1c67065..a91081c 100644
--- a/drivers/soc/freescale/bman_portal.c
+++ b/drivers/soc/freescale/bman_portal.c
@@ -134,12 +134,12 @@ static struct bman_portal * __init init_pcfg(struct bm_portal_config *pcfg)
#ifdef CONFIG_FSL_DPA_PIRQ_SLOW
bman_p_irqsource_add(p, BM_PIRQ_RCRI | BM_PIRQ_BSCN);
#endif
- pr_info("Bman portal %s initialised, cpu %d\n",
+ pr_info("BMan portal %s initialised, cpu %d\n",
pcfg->public_cfg.is_shared ? "(shared) " : "",
pcfg->public_cfg.cpu);
affine_bportals[pcfg->public_cfg.cpu] = p;
} else
- pr_crit("Bman portal failure on cpu %d\n",
+ pr_crit("BMan portal failure on cpu %d\n",
pcfg->public_cfg.cpu);
return p;
@@ -151,9 +151,9 @@ static void __init init_slave(int cpu)
p = bman_create_affine_slave(shared_portals[shared_portals_idx++], cpu);
if (!p)
- pr_err("Bman slave portal failure on cpu %d\n", cpu);
+ pr_err("BMan slave portal failure on cpu %d\n", cpu);
else
- pr_info("Bman portal %s initialised, cpu %d\n", "(slave) ", cpu);
+ pr_info("BMan portal %s initialised, cpu %d\n", "(slave) ", cpu);
if (shared_portals_idx >= num_shared_portals)
shared_portals_idx = 0;
affine_bportals[cpu] = p;
@@ -192,7 +192,7 @@ static void bman_offline_cpu(unsigned int cpu)
}
}
-/* Initialise the Bman driver. The meat of this function deals with portals. The
+/* Initialise the BMan driver. The meat of this function deals with portals. The
* following describes the flow of portal-handling, the code "steps" refer to
* this description;
* 1. Portal configs are parsed from the device-tree into 'unused_pcfgs', with
@@ -231,12 +231,12 @@ int __init bman_init(void)
int cpu;
struct cpumask offline_cpus;
- /* Initialise the Bman (CCSR) device */
+ /* Initialise the BMan (CCSR) device */
for_each_compatible_node(dn, NULL, "fsl,bman") {
if (!bman_init_ccsr(dn))
- pr_info("Bman err interrupt handler present\n");
+ pr_info("BMan err interrupt handler present\n");
else
- pr_err("Bman CCSR setup failed\n");
+ pr_err("BMan CCSR setup failed\n");
}
/* Step 1. See comments at the beginning of the file. */
for_each_compatible_node(dn, NULL, "fsl,bman-portal") {
@@ -321,7 +321,7 @@ int __init bman_init(void)
if (!cpumask_empty(&slave_cpus))
for_each_cpu(cpu, &slave_cpus)
init_slave(cpu);
- pr_info("Bman portals initialised\n");
+ pr_info("BMan portals initialised\n");
cpumask_andnot(&offline_cpus, cpu_possible_mask, cpu_online_mask);
for_each_cpu(cpu, &offline_cpus)
bman_offline_cpu(cpu);
diff --git a/drivers/soc/freescale/bman_priv.h b/drivers/soc/freescale/bman_priv.h
index a183cc6..842ec37 100644
--- a/drivers/soc/freescale/bman_priv.h
+++ b/drivers/soc/freescale/bman_priv.h
@@ -131,7 +131,7 @@ int bman_have_ccsr(void);
#ifdef CONFIG_FSL_BMAN_CONFIG
/* Set depletion thresholds associated with a buffer pool. Requires that the
- * operating system have access to Bman CCSR (ie. compiled in support and
+ * operating system have access to BMan CCSR (ie. compiled in support and
* run-time access courtesy of the device-tree). */
int bm_pool_set(u32 bpid, const u32 *thresholds);
#define BM_POOL_THRESH_SW_ENTER 0
diff --git a/drivers/soc/freescale/bman_test.c b/drivers/soc/freescale/bman_test.c
new file mode 100644
index 0000000..350f2f8
--- /dev/null
+++ b/drivers/soc/freescale/bman_test.c
@@ -0,0 +1,56 @@
+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "bman_test.h"
+
+MODULE_AUTHOR("Geoff Thorpe");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("BMan testing");
+
+static int test_init(void)
+{
+#ifdef CONFIG_FSL_BMAN_TEST_HIGH
+ int loop = 1;
+ while (loop--)
+ bman_test_api();
+#endif
+#ifdef CONFIG_FSL_BMAN_TEST_THRESH
+ bman_test_thresh();
+#endif
+ return 0;
+}
+
+static void test_exit(void)
+{
+}
+
+module_init(test_init);
+module_exit(test_exit);
diff --git a/drivers/soc/freescale/bman_test.h b/drivers/soc/freescale/bman_test.h
new file mode 100644
index 0000000..a0f5147
--- /dev/null
+++ b/drivers/soc/freescale/bman_test.h
@@ -0,0 +1,44 @@
+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+
+#include <linux/fsl_bman.h>
+
+void bman_test_api(void);
+void bman_test_thresh(void);
diff --git a/drivers/soc/freescale/bman_test_api.c b/drivers/soc/freescale/bman_test_api.c
new file mode 100644
index 0000000..467cde7
--- /dev/null
+++ b/drivers/soc/freescale/bman_test_api.c
@@ -0,0 +1,181 @@
+/* Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "bman_test.h"
+#include "bman_priv.h"
+
+/*************/
+/* constants */
+/*************/
+
+#define PORTAL_OPAQUE ((void *)0xf00dbeef)
+#define POOL_OPAQUE ((void *)0xdeadabba)
+#define NUM_BUFS 93
+#define LOOPS 3
+#define BMAN_TOKEN_MASK 0x00FFFFFFFFFFLLU
+
+/***************/
+/* global vars */
+/***************/
+
+static struct bman_pool *pool;
+static int depleted;
+static struct bm_buffer bufs_in[NUM_BUFS] ____cacheline_aligned;
+static struct bm_buffer bufs_out[NUM_BUFS] ____cacheline_aligned;
+static int bufs_received;
+
+/* Predeclare the callback so we can instantiate pool parameters */
+static void depletion_cb(struct bman_portal *, struct bman_pool *, void *, int);
+
+/**********************/
+/* internal functions */
+/**********************/
+
+static void bufs_init(void)
+{
+ int i;
+ for (i = 0; i < NUM_BUFS; i++)
+ bm_buffer_set64(&bufs_in[i], 0xfedc01234567LLU * i);
+ bufs_received = 0;
+}
+
+static inline int bufs_cmp(const struct bm_buffer *a, const struct bm_buffer *b)
+{
+ if ((bman_ip_rev == BMAN_REV20) || (bman_ip_rev == BMAN_REV21)) {
+
+ /* On SoCs with BMan revison 2.0, BMan only respects the 40
+ * LS-bits of buffer addresses, masking off the upper 8-bits on
+ * release commands. The API provides for 48-bit addresses
+ * because some SoCs support all 48-bits. When generating
+ * garbage addresses for testing, we either need to zero the
+ * upper 8-bits when releasing to BMan (otherwise we'll be
+ * disappointed when the buffers we acquire back from BMan
+ * don't match), or we need to mask the upper 8-bits off when
+ * comparing. We do the latter.
+ */
+ if ((bm_buffer_get64(a) & BMAN_TOKEN_MASK)
+ < (bm_buffer_get64(b) & BMAN_TOKEN_MASK))
+ return -1;
+ if ((bm_buffer_get64(a) & BMAN_TOKEN_MASK)
+ > (bm_buffer_get64(b) & BMAN_TOKEN_MASK))
+ return 1;
+ } else {
+ if (bm_buffer_get64(a) < bm_buffer_get64(b))
+ return -1;
+ if (bm_buffer_get64(a) > bm_buffer_get64(b))
+ return 1;
+ }
+
+ return 0;
+}
+
+static void bufs_confirm(void)
+{
+ int i, j;
+ for (i = 0; i < NUM_BUFS; i++) {
+ int matches = 0;
+ for (j = 0; j < NUM_BUFS; j++)
+ if (!bufs_cmp(&bufs_in[i], &bufs_out[j]))
+ matches++;
+ BUG_ON(matches != 1);
+ }
+}
+
+/********/
+/* test */
+/********/
+
+static void depletion_cb(struct bman_portal *__portal, struct bman_pool *__pool,
+ void *pool_ctx, int __depleted)
+{
+ BUG_ON(__pool != pool);
+ BUG_ON(pool_ctx != POOL_OPAQUE);
+ depleted = __depleted;
+}
+
+void bman_test_api(void)
+{
+ struct bman_pool_params pparams = {
+ .flags = BMAN_POOL_FLAG_DEPLETION | BMAN_POOL_FLAG_DYNAMIC_BPID,
+ .cb = depletion_cb,
+ .cb_ctx = POOL_OPAQUE,
+ };
+ int i, loops = LOOPS;
+
+ bufs_init();
+
+ pr_info("BMAN: --- starting high-level test ---\n");
+
+ pool = bman_new_pool(&pparams);
+ BUG_ON(!pool);
+
+ /*******************/
+ /* Release buffers */
+ /*******************/
+do_loop:
+ i = 0;
+ while (i < NUM_BUFS) {
+ u32 flags = BMAN_RELEASE_FLAG_WAIT;
+ int num = 8;
+ if ((i + num) > NUM_BUFS)
+ num = NUM_BUFS - i;
+ if ((i + num) == NUM_BUFS)
+ flags |= BMAN_RELEASE_FLAG_WAIT_SYNC;
+ if (bman_release(pool, bufs_in + i, num, flags))
+ panic("bman_release() failed\n");
+ i += num;
+ }
+
+ /*******************/
+ /* Acquire buffers */
+ /*******************/
+ while (i > 0) {
+ int tmp, num = 8;
+ if (num > i)
+ num = i;
+ tmp = bman_acquire(pool, bufs_out + i - num, num, 0);
+ BUG_ON(tmp != num);
+ i -= num;
+ }
+ i = bman_acquire(pool, NULL, 1, 0);
+ BUG_ON(i > 0);
+
+ bufs_confirm();
+
+ if (--loops)
+ goto do_loop;
+
+ /************/
+ /* Clean up */
+ /************/
+ bman_free_pool(pool);
+ pr_info("BMAN: --- finished high-level test ---\n");
+}
diff --git a/drivers/soc/freescale/bman_test_thresh.c b/drivers/soc/freescale/bman_test_thresh.c
new file mode 100644
index 0000000..c03db24
--- /dev/null
+++ b/drivers/soc/freescale/bman_test_thresh.c
@@ -0,0 +1,196 @@
+/* Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "bman_test.h"
+
+/* Test constants */
+#define TEST_NUMBUFS 129728
+#define TEST_EXIT 129536
+#define TEST_ENTRY 129024
+
+struct affine_test_data {
+ struct task_struct *t;
+ int cpu;
+ int expect_affinity;
+ int drain;
+ int num_enter;
+ int num_exit;
+ struct list_head node;
+ struct completion wakethread;
+ struct completion wakeparent;
+};
+
+static void cb_depletion(struct bman_portal *portal,
+ struct bman_pool *pool,
+ void *opaque,
+ int depleted)
+{
+ struct affine_test_data *data = opaque;
+ int c = smp_processor_id();
+ pr_info("cb_depletion: bpid=%d, depleted=%d, cpu=%d, original=%d\n",
+ bman_get_params(pool)->bpid, !!depleted, c, data->cpu);
+ /* We should be executing on the CPU of the thread that owns the pool if
+ * and that CPU has an affine portal (ie. it isn't slaved). */
+ BUG_ON((c != data->cpu) && data->expect_affinity);
+ BUG_ON((c == data->cpu) && !data->expect_affinity);
+ if (depleted)
+ data->num_enter++;
+ else
+ data->num_exit++;
+}
+
+/* Params used to set up a pool, this also dynamically allocates a BPID */
+static const struct bman_pool_params params_nocb = {
+ .flags = BMAN_POOL_FLAG_DYNAMIC_BPID | BMAN_POOL_FLAG_THRESH,
+ .thresholds = { TEST_ENTRY, TEST_EXIT, 0, 0 }
+};
+
+/* Params used to set up each cpu's pool with callbacks enabled */
+static struct bman_pool_params params_cb = {
+ .bpid = 0, /* will be replaced to match pool_nocb */
+ .flags = BMAN_POOL_FLAG_DEPLETION,
+ .cb = cb_depletion
+};
+
+static struct bman_pool *pool_nocb;
+static LIST_HEAD(threads);
+
+static int affine_test(void *__data)
+{
+ struct bman_pool *pool;
+ struct affine_test_data *data = __data;
+ struct bman_pool_params my_params = params_cb;
+
+ pr_info("thread %d: starting\n", data->cpu);
+ /* create the pool */
+ my_params.cb_ctx = data;
+ pool = bman_new_pool(&my_params);
+ BUG_ON(!pool);
+ complete(&data->wakeparent);
+ wait_for_completion(&data->wakethread);
+ init_completion(&data->wakethread);
+
+ /* if we're the drainer, we get signalled for that */
+ if (data->drain) {
+ struct bm_buffer buf;
+ int ret;
+ pr_info("thread %d: draining...\n", data->cpu);
+ do {
+ ret = bman_acquire(pool, &buf, 1, 0);
+ } while (ret > 0);
+ pr_info("thread %d: draining done.\n", data->cpu);
+ complete(&data->wakeparent);
+ wait_for_completion(&data->wakethread);
+ init_completion(&data->wakethread);
+ }
+
+ /* cleanup */
+ bman_free_pool(pool);
+ while (!kthread_should_stop())
+ cpu_relax();
+ pr_info("thread %d: exiting\n", data->cpu);
+ return 0;
+}
+
+static struct affine_test_data *start_affine_test(int cpu, int drain)
+{
+ struct affine_test_data *data = kmalloc(sizeof(*data), GFP_KERNEL);
+
+ if (!data)
+ return NULL;
+ data->cpu = cpu;
+ data->expect_affinity = cpumask_test_cpu(cpu, bman_affine_cpus());
+ data->drain = drain;
+ data->num_enter = 0;
+ data->num_exit = 0;
+ init_completion(&data->wakethread);
+ init_completion(&data->wakeparent);
+ list_add_tail(&data->node, &threads);
+ data->t = kthread_create(affine_test, data, "threshtest%d", cpu);
+ BUG_ON(IS_ERR(data->t));
+ kthread_bind(data->t, cpu);
+ wake_up_process(data->t);
+ return data;
+}
+
+void bman_test_thresh(void)
+{
+ int loop = TEST_NUMBUFS;
+ int ret, num_cpus = 0;
+ struct affine_test_data *data, *drainer = NULL;
+
+ pr_info("bman_test_thresh: start\n");
+
+ /* allocate a BPID and seed it */
+ pool_nocb = bman_new_pool(¶ms_nocb);
+ BUG_ON(!pool_nocb);
+ while (loop--) {
+ struct bm_buffer buf;
+ bm_buffer_set64(&buf, 0x0badbeef + loop);
+ ret = bman_release(pool_nocb, &buf, 1,
+ BMAN_RELEASE_FLAG_WAIT);
+ BUG_ON(ret);
+ }
+ while (!bman_rcr_is_empty())
+ cpu_relax();
+ pr_info("bman_test_thresh: buffers are in\n");
+
+ /* create threads and wait for them to create pools */
+ params_cb.bpid = bman_get_params(pool_nocb)->bpid;
+ for_each_cpu(loop, cpu_online_mask) {
+ data = start_affine_test(loop, drainer ? 0 : 1);
+ BUG_ON(!data);
+ if (!drainer)
+ drainer = data;
+ num_cpus++;
+ wait_for_completion(&data->wakeparent);
+ }
+
+ /* signal the drainer to start draining */
+ complete(&drainer->wakethread);
+ wait_for_completion(&drainer->wakeparent);
+ init_completion(&drainer->wakeparent);
+
+ /* tear down */
+ list_for_each_entry_safe(data, drainer, &threads, node) {
+ complete(&data->wakethread);
+ ret = kthread_stop(data->t);
+ BUG_ON(ret);
+ list_del(&data->node);
+ /* check that we get the expected callbacks (and no others) */
+ BUG_ON(data->num_enter != 1);
+ BUG_ON(data->num_exit != 0);
+ kfree(data);
+ }
+ bman_free_pool(pool_nocb);
+
+ pr_info("bman_test_thresh: done\n");
+}
diff --git a/drivers/soc/freescale/dpaa_alloc.c b/drivers/soc/freescale/dpaa_alloc.c
index 0215477..88a4786 100644
--- a/drivers/soc/freescale/dpaa_alloc.c
+++ b/drivers/soc/freescale/dpaa_alloc.c
@@ -365,7 +365,7 @@ static u32 release_id_range(struct dpa_alloc *alloc, u32 id, u32 count,
return total_invalid;
}
-/* Bman APIs are front-ends to the common code */
+/* BMan APIs are front-ends to the common code */
#ifdef CONFIG_FSL_BMAN
static DECLARE_DPA_ALLOC(bpalloc); /* BPID allocator */
diff --git a/drivers/soc/freescale/dpaa_sys.h b/drivers/soc/freescale/dpaa_sys.h
index 86b280c..6631b2a 100644
--- a/drivers/soc/freescale/dpaa_sys.h
+++ b/drivers/soc/freescale/dpaa_sys.h
@@ -240,7 +240,7 @@ static inline type *name##_find(struct dpa_rbtree *tree, u32 val) \
/* Bootargs */
/************/
-/* Qman has "qportals=" and Bman has "bportals=", they use the same syntax
+/* QMan has "qportals=" and BMan has "bportals=", they use the same syntax
* though; a comma-separated list of items, each item being a cpu index and/or a
* range of cpu indices, and each item optionally be prefixed by "s" to indicate
* that the portal associated with that cpu should be shared. See bman_driver.c
diff --git a/drivers/soc/freescale/qman.c b/drivers/soc/freescale/qman.c
index 3d7d02e..f791884 100644
--- a/drivers/soc/freescale/qman.c
+++ b/drivers/soc/freescale/qman.c
@@ -259,7 +259,7 @@ static const struct qman_error_info_mdata error_mdata[] = {
/*
* TODO: unimplemented registers
*
- * Keeping a list here of Qman registers I have not yet covered;
+ * Keeping a list here of QMan registers I have not yet covered;
* QCSP_DD_IHRSR, QCSP_DD_IHRFR, QCSP_DD_HASR,
* DCP_DD_IHRSR, DCP_DD_IHRFR, DCP_DD_HASR, CM_CFG,
* QMAN_EECC, QMAN_SBET, QMAN_EINJ, QMAN_SBEC0-12
@@ -476,7 +476,7 @@ static int __init fsl_qman_init(struct device_node *node)
qm = qm_create(regs);
qm_node = node;
qm_get_version(qm, &id, &major, &minor);
- pr_info("Qman ver:%04x,%02x,%02x\n", id, major, minor);
+ pr_info("QMan ver:%04x,%02x,%02x\n", id, major, minor);
if (!qman_ip_rev) {
if ((major == 1) && (minor == 0)) {
pr_err("QMAN rev1.0 on P4080 rev1 is not supported!\n");
@@ -493,7 +493,7 @@ static int __init fsl_qman_init(struct device_node *node)
else if ((major == 3) && (minor == 1))
qman_ip_rev = QMAN_REV31;
else {
- pr_warn("unknown Qman version, default to rev1.1\n");
+ pr_warn("unknown QMan version, default to rev1.1\n");
qman_ip_rev = QMAN_REV11;
}
}
@@ -529,7 +529,7 @@ static void log_edata_bits(u32 bit_count)
{
u32 i, j, mask = 0xffffffff;
- pr_warn("Qman ErrInt, EDATA:\n");
+ pr_warn("QMan ErrInt, EDATA:\n");
i = bit_count/32;
if (bit_count%32) {
i++;
@@ -553,17 +553,17 @@ static void log_additional_error_info(u32 isr_val, u32 ecsr_val)
union qman_ecir2 ecir2_val;
ecir2_val.ecir2_raw = qm_in(ECIR2);
if (ecsr_val & PORTAL_ECSR_ERR) {
- pr_warn("Qman ErrInt: %s id %d\n",
+ pr_warn("QMan ErrInt: %s id %d\n",
(ecir2_val.info.portal_type) ?
"DCP" : "SWP", ecir2_val.info.portal_num);
}
if (ecsr_val & (FQID_ECSR_ERR | QM_EIRQ_IECE)) {
- pr_warn("Qman ErrInt: ecir.fqid 0x%x\n",
+ pr_warn("QMan ErrInt: ecir.fqid 0x%x\n",
ecir_val.info.fqid);
}
if (ecsr_val & (QM_EIRQ_SBEI|QM_EIRQ_MBEI)) {
eadr_val.eadr_raw = qm_in(EADR);
- pr_warn("Qman ErrInt: EADR Memory: %s, 0x%x\n",
+ pr_warn("QMan ErrInt: EADR Memory: %s, 0x%x\n",
error_mdata[eadr_val.info_rev3.memid].txt,
error_mdata[eadr_val.info_rev3.memid].addr_mask
& eadr_val.info_rev3.eadr);
@@ -572,17 +572,17 @@ static void log_additional_error_info(u32 isr_val, u32 ecsr_val)
}
} else {
if (ecsr_val & PORTAL_ECSR_ERR) {
- pr_warn("Qman ErrInt: %s id %d\n",
+ pr_warn("QMan ErrInt: %s id %d\n",
(ecir_val.info.portal_type) ?
"DCP" : "SWP", ecir_val.info.portal_num);
}
if (ecsr_val & FQID_ECSR_ERR) {
- pr_warn("Qman ErrInt: ecir.fqid 0x%x\n",
+ pr_warn("QMan ErrInt: ecir.fqid 0x%x\n",
ecir_val.info.fqid);
}
if (ecsr_val & (QM_EIRQ_SBEI|QM_EIRQ_MBEI)) {
eadr_val.eadr_raw = qm_in(EADR);
- pr_warn("Qman ErrInt: EADR Memory: %s, 0x%x\n",
+ pr_warn("QMan ErrInt: EADR Memory: %s, 0x%x\n",
error_mdata[eadr_val.info.memid].txt,
error_mdata[eadr_val.info.memid].addr_mask
& eadr_val.info.eadr);
@@ -591,7 +591,7 @@ static void log_additional_error_info(u32 isr_val, u32 ecsr_val)
}
}
-/* Qman interrupt handler */
+/* QMan interrupt handler */
static irqreturn_t qman_isr(int irq, void *ptr)
{
u32 isr_val, ier_val, ecsr_val, isr_mask, i;
@@ -605,14 +605,14 @@ static irqreturn_t qman_isr(int irq, void *ptr)
return IRQ_NONE;
for (i = 0; i < QMAN_HWE_COUNT; i++) {
if (qman_hwerr_txts[i].mask & isr_mask) {
- pr_warn("Qman ErrInt: %s\n", qman_hwerr_txts[i].txt);
+ pr_warn("QMan ErrInt: %s\n", qman_hwerr_txts[i].txt);
if (qman_hwerr_txts[i].mask & ecsr_val) {
log_additional_error_info(isr_mask, ecsr_val);
/* Re-arm error capture registers */
qm_out(ECSR, ecsr_val);
}
if (qman_hwerr_txts[i].mask & QMAN_ERRS_TO_UNENABLE) {
- pr_devel("Qman un-enabling error 0x%x\n",
+ pr_devel("QMan un-enabling error 0x%x\n",
qman_hwerr_txts[i].mask);
ier_val &= ~qman_hwerr_txts[i].mask;
qm_err_isr_enable_write(qm, ier_val);
diff --git a/drivers/soc/freescale/qman_api.c b/drivers/soc/freescale/qman_api.c
index 2d980b3..08dbb36 100644
--- a/drivers/soc/freescale/qman_api.c
+++ b/drivers/soc/freescale/qman_api.c
@@ -388,24 +388,24 @@ struct qman_portal *qman_create_portal(
*/
if (qm_eqcr_init(__p, qm_eqcr_pvb,
portal->use_eqcr_ci_stashing ? 3 : 0, 1)) {
- pr_err("Qman EQCR initialisation failed\n");
+ pr_err("QMan EQCR initialisation failed\n");
goto fail_eqcr;
}
if (qm_dqrr_init(__p, config, qm_dqrr_dpush, qm_dqrr_pvb,
qm_dqrr_cdc, DQRR_MAXFILL)) {
- pr_err("Qman DQRR initialisation failed\n");
+ pr_err("QMan DQRR initialisation failed\n");
goto fail_dqrr;
}
if (qm_mr_init(__p, qm_mr_pvb, qm_mr_cci)) {
- pr_err("Qman MR initialisation failed\n");
+ pr_err("QMan MR initialisation failed\n");
goto fail_mr;
}
if (qm_mc_init(__p)) {
- pr_err("Qman MC initialisation failed\n");
+ pr_err("QMan MC initialisation failed\n");
goto fail_mc;
}
if (qm_isr_init(__p)) {
- pr_err("Qman ISR initialisation failed\n");
+ pr_err("QMan ISR initialisation failed\n");
goto fail_isr;
}
/* static interrupt-gating controls */
@@ -473,20 +473,20 @@ struct qman_portal *qman_create_portal(
qm_isr_disable_write(__p, isdr);
ret = qm_eqcr_get_fill(__p);
if (ret) {
- pr_err("Qman EQCR unclean\n");
+ pr_err("QMan EQCR unclean\n");
goto fail_eqcr_empty;
}
isdr ^= (QM_PIRQ_DQRI | QM_PIRQ_MRI);
qm_isr_disable_write(__p, isdr);
if (qm_dqrr_current(__p) != NULL) {
- pr_err("Qman DQRR unclean\n");
+ pr_err("QMan DQRR unclean\n");
qm_dqrr_cdc_consume_n(__p, 0xffff);
}
if (qm_mr_current(__p) != NULL) {
/* special handling, drain just in case it's a few FQRNIs */
if (drain_mr_fqrni(__p)) {
const struct qm_mr_entry *e = qm_mr_current(__p);
- pr_err("Qman MR unclean, MR VERB 0x%x, "
+ pr_err("QMan MR unclean, MR VERB 0x%x, "
"rc 0x%x\n, addr 0x%x",
e->verb, e->ern.rc, e->ern.fd.addr_lo);
goto fail_dqrr_mr_empty;
@@ -841,7 +841,7 @@ static noinline void clear_vdqcr(struct qman_portal *p, struct qman_fq *fq)
* above potential conflicts, but that this function itself is not re-entrant
* (this is because the function tracks one end of each FIFO in the portal and
* we do *not* want to lock that). So the consequence is that it is safe for
- * user callbacks to call into any Qman API *except* qman_poll() (as that's the
+ * user callbacks to call into any QMan API *except* qman_poll() (as that's the
* sole API that could be invoking the callback through this function).
*/
static inline unsigned int __poll_portal_fast(struct qman_portal *p,
diff --git a/drivers/soc/freescale/qman_portal.c b/drivers/soc/freescale/qman_portal.c
index ac1b80f..7216de1 100644
--- a/drivers/soc/freescale/qman_portal.c
+++ b/drivers/soc/freescale/qman_portal.c
@@ -109,7 +109,7 @@ static void qman_get_ip_revision(struct device_node *dn)
if (ip_rev) {
qman_ip_rev = ip_rev;
} else {
- pr_warn("unknown Qman version,"
+ pr_warn("unknown QMan version,"
" default to rev1.1\n");
qman_ip_rev = QMAN_REV11;
}
@@ -311,11 +311,11 @@ static struct qman_portal *init_pcfg(struct qm_portal_config *pcfg)
irq_sources |= QM_PIRQ_DQRI;
#endif
qman_p_irqsource_add(p, irq_sources);
- pr_info("Qman portal %sinitialised, cpu %d\n",
+ pr_info("QMan portal %sinitialised, cpu %d\n",
pcfg->public_cfg.is_shared ? "(shared) " : "",
pcfg->public_cfg.cpu);
} else
- pr_crit("Qman portal failure on cpu %d\n",
+ pr_crit("QMan portal failure on cpu %d\n",
pcfg->public_cfg.cpu);
return p;
}
@@ -327,9 +327,9 @@ static void init_slave(int cpu)
set_cpus_allowed_ptr(current, get_cpu_mask(cpu));
p = qman_create_affine_slave(shared_portals[shared_portals_idx++], cpu);
if (!p)
- pr_err("Qman slave portal failure on cpu %d\n", cpu);
+ pr_err("QMan slave portal failure on cpu %d\n", cpu);
else
- pr_info("Qman portal %sinitialised, cpu %d\n", "(slave) ", cpu);
+ pr_info("QMan portal %sinitialised, cpu %d\n", "(slave) ", cpu);
set_cpus_allowed_ptr(current, &oldmask);
if (shared_portals_idx >= num_shared_portals)
shared_portals_idx = 0;
@@ -397,12 +397,12 @@ __init int qman_init(void)
#endif
struct cpumask offline_cpus;
- /* Initialise the Qman (CCSR) device */
+ /* Initialise the QMan (CCSR) device */
for_each_compatible_node(dn, NULL, "fsl,qman") {
if (!qman_init_ccsr(dn))
- pr_info("Qman err interrupt handler present\n");
+ pr_info("QMan err interrupt handler present\n");
else
- pr_err("Qman CCSR setup failed\n");
+ pr_err("QMan CCSR setup failed\n");
}
#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
/* Setup lookup table for FQ demux */
@@ -495,7 +495,7 @@ __init int qman_init(void)
if (!cpumask_empty(&slave_cpus))
for_each_cpu(cpu, &slave_cpus)
init_slave(cpu);
- pr_info("Qman portals initialised\n");
+ pr_info("QMan portals initialised\n");
cpumask_andnot(&offline_cpus, cpu_possible_mask, cpu_online_mask);
for_each_cpu(cpu, &offline_cpus)
qman_offline_cpu(cpu);
diff --git a/drivers/soc/freescale/qman_priv.h b/drivers/soc/freescale/qman_priv.h
index da9021b..2a5fa2d 100644
--- a/drivers/soc/freescale/qman_priv.h
+++ b/drivers/soc/freescale/qman_priv.h
@@ -41,7 +41,7 @@
/* ----------------- */
/* Congestion Groups */
/* ----------------- */
-/* This wrapper represents a bit-array for the state of the 256 Qman congestion
+/* This wrapper represents a bit-array for the state of the 256 QMan congestion
* groups. Is also used as a *mask* for congestion groups, eg. so we ignore
* those that don't concern us. We harness the structure and accessor details
* already used in the management command to query congestion groups. */
diff --git a/include/linux/fsl_bman.h b/include/linux/fsl_bman.h
index 16845d3..5883453 100644
--- a/include/linux/fsl_bman.h
+++ b/include/linux/fsl_bman.h
@@ -42,7 +42,7 @@ extern "C" {
#define BM_PIRQ_RCRI 0x00000002 /* RCR Ring (below threshold) */
#define BM_PIRQ_BSCN 0x00000001 /* Buffer depletion State Change */
-/* This wrapper represents a bit-array for the depletion state of the 64 Bman
+/* This wrapper represents a bit-array for the depletion state of the 64 BMan
* buffer pools. */
struct bman_depletion {
u32 __state[2];
@@ -74,7 +74,7 @@ static inline void bman_depletion_unset(struct bman_depletion *c, u8 bpid)
}
/* ------------------------------------------------------- */
-/* --- Bman data structures (and associated constants) --- */
+/* --- BMan data structures (and associated constants) --- */
/* Represents s/w corenet portal mapped data structures */
struct bm_rcr_entry; /* RCR (Release Command Ring) entries */
@@ -204,7 +204,7 @@ struct bm_mc_result {
/* Represents a managed portal */
struct bman_portal;
-/* This object type represents Bman buffer pools. */
+/* This object type represents BMan buffer pools. */
struct bman_pool;
struct bman_portal_config {
@@ -241,7 +241,7 @@ struct bman_pool_params {
void *cb_ctx;
/* depletion-entry/exit thresholds, if BMAN_POOL_FLAG_THRESH is set. NB:
* this is only allowed if BMAN_POOL_FLAG_DYNAMIC_BPID is used *and*
- * when run in the control plane (which controls Bman CCSR). This array
+ * when run in the control plane (which controls BMan CCSR). This array
* matches the definition of bm_pool_set(). */
u32 thresholds[4];
};
@@ -350,7 +350,7 @@ void bman_poll(void);
* bman_rcr_is_empty - Determine if portal's RCR is empty
*
* For use in situations where a cpu-affine caller needs to determine when all
- * releases for the local portal have been processed by Bman but can't use the
+ * releases for the local portal have been processed by BMan but can't use the
* BMAN_RELEASE_FLAG_WAIT_SYNC flag to do this from the final bman_release().
* The function forces tracking of RCR consumption (which normally doesn't
* happen until release processing needs to find space to put new release
diff --git a/include/linux/fsl_qman.h b/include/linux/fsl_qman.h
index c12cbd3..f52e919 100644
--- a/include/linux/fsl_qman.h
+++ b/include/linux/fsl_qman.h
@@ -109,7 +109,7 @@ static inline u32 QM_SDQCR_CHANNELS_POOL_CONV(u16 channel)
/* ------------------------------------------------------- */
-/* --- Qman data structures (and associated constants) --- */
+/* --- QMan data structures (and associated constants) --- */
/* Represents s/w corenet portal mapped data structures */
struct qm_eqcr_entry; /* EQCR (EnQueue Command Ring) entries */
@@ -978,12 +978,12 @@ u32 qman_fqid_pool_used(struct qman_fqid_pool *pool);
/* Represents a managed portal */
struct qman_portal;
-/* This object type represents Qman frame queue descriptors (FQD), it is
+/* This object type represents QMan frame queue descriptors (FQD), it is
* cacheline-aligned, and initialised by qman_create_fq(). The structure is
* defined further down. */
struct qman_fq;
-/* This object type represents a Qman congestion group, it is defined further
+/* This object type represents a QMan congestion group, it is defined further
* down. */
struct qman_cgr;
@@ -1083,7 +1083,7 @@ enum qman_fq_state {
*
* (b) when and if configuring the FQ for context stashing, specify how ever
* many cachelines are required to stash 'struct my_fq', to accelerate not
- * only the Qman driver but the callback as well.
+ * only the QMan driver but the callback as well.
*/
struct qman_fq_cb {
@@ -1358,7 +1358,7 @@ void qman_dca(struct qm_dqrr_entry *dq, int park_request);
* qman_eqcr_is_empty - Determine if portal's EQCR is empty
*
* For use in situations where a cpu-affine caller needs to determine when all
- * enqueues for the local portal have been processed by Qman but can't use the
+ * enqueues for the local portal have been processed by QMan but can't use the
* QMAN_ENQUEUE_FLAG_WAIT_SYNC flag to do this from the final qman_enqueue().
* The function forces tracking of EQCR consumption (which normally doesn't
* happen until enqueue processing needs to find space to put new enqueue
@@ -1372,7 +1372,7 @@ int qman_eqcr_is_empty(void);
* @handler: callback for processing DCP ERNs
* @affine: whether this handler is specific to the locally affine portal
*
- * If a hardware block's interface to Qman (ie. its direct-connect portal, or
+ * If a hardware block's interface to QMan (ie. its direct-connect portal, or
* DCP) is configured not to receive enqueue rejections, then any enqueues
* through that DCP that are rejected will be sent to a given software portal.
* If @affine is non-zero, then this handler will only be used for DCP ERNs
@@ -1582,13 +1582,13 @@ int qman_volatile_dequeue(struct qman_fq *fq, u32 flags, u32 vdqcr);
* (and FLAG_WAIT not specified), congestion avoidance (FLAG_WATCH_CGR
* specified), etc. If the ring is full and FLAG_WAIT is specified, this
* function will block. If FLAG_INTERRUPT is set, the EQCI bit of the portal
- * interrupt will assert when Qman consumes the EQCR entry (subject to "status
- * disable", "enable", and "inhibit" registers). If FLAG_DCA is set, Qman will
+ * interrupt will assert when QMan consumes the EQCR entry (subject to "status
+ * disable", "enable", and "inhibit" registers). If FLAG_DCA is set, QMan will
* perform an implied "discrete consumption acknowledgement" on the dequeue
* ring's (DQRR) entry, at the ring index specified by the FLAG_DCA_IDX(x)
* macro. (As an alternative to issuing explicit DCA actions on DQRR entries,
* this implicit DCA can delay the release of a "held active" frame queue
- * corresponding to a DQRR entry until Qman consumes the EQCR entry - providing
+ * corresponding to a DQRR entry until QMan consumes the EQCR entry - providing
* order-preservation semantics in packet-forwarding scenarios.) If FLAG_DCA is
* set, then FLAG_DCA_PARK can also be set to imply that the DQRR consumption
* acknowledgement should "park request" the "held active" frame queue. Ie.
--
2.3.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists