linux-kernel - Re: [PATCH v2 1/3] Ethernet packet sniffer: Device tree binding and vendor prefix

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <54E45E06.2020609@linn.co.uk>
Date:	Wed, 18 Feb 2015 09:40:22 +0000
From:	Stathis Voukelatos <stathis.voukelatos@...n.co.uk>
To:	Mark Rutland <mark.rutland@....com>
CC:	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"abrestic@...omium.org" <abrestic@...omium.org>
Subject: Re: [PATCH v2 1/3] Ethernet packet sniffer: Device tree binding and
 vendor prefix



On 17/02/15 17:30, Mark Rutland wrote:

>> It is the frequency of the timestamp values supplied to the sniffer
>> module. It is used by the driver to convert to nanoseconds.
>> I was trying to be somewhat generic here and not assume that it
>> is necessarily the same as the 'tstamp' clock below, in which case we
>> could indeed obtain it using the common clock framework.
>
> In what cases would it _not_ be the same? From your description this is
> that clock, no?
>

Counters can often have a divider applied to their input clock and
therefore run at a scaled down frequency. This is not the case in the
first SoC where the sniffer is used, so for simplicity I can modify as
you suggest and remove that field from the DT.

>> Most networking driver use hard-coded values for that, but in my case
>> I did not want to assume a certain fixed clock frequency. I will remove
>> it from the DT and generate it dynamically. There is a kernel function
>> clocks_calc_mult_shift() to do it but unfortunately it is not exported,
>> so I guess I will need to replicate the code.
>
> Or submit a patch exporting it, along with the rationale for doing so?
>

Will do that.

>> Yes, but the sniffer module is hard-wired to a certain Ethernet Mii
>> interface. We can add an entry to tie it to an Ethernet controller, but
>> apart of a sanity check I am not sure what else the S/W can do.
>
> Fundamentally, the use-case for this is monitoring an ethernet
> interface. So regardless of which kernel framework this plumbs into,
> there needs to be a way to go from ethN to whatever this is exposed as.
>
> Exposing a completely separate interface makes no sense. Singleton stuff
> like that inevitably gets broken as someone later builds a board with
> multiple instances of some similar IP block.
>
> So I would imagine that either the link between interface and monitoring
> interface would be described somewhere in the filesystem, or there'd be
> a syscall/ioctl/whatever to go from an interface to the appropriate
> monitoring interface.
>
> That all depends on exactly how this gets exposed in the end, however.
>

After the first version of the patch was submitted, the feedback from 
the netdev list was to expose it as a network interface as this would
allow it to be accessed by standard user space monitoring tools.
It definitely makes sense to link it to the associated ethernet netdev,
but I am not sure if there is a framework in the kernel to do it at
the driver level?

> Thanks,
> Mark.
> --

Thank you,
Stathis
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/