[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1424449341-7782-6-git-send-email-b.zolnierkie@samsung.com>
Date: Fri, 20 Feb 2015 17:22:21 +0100
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Kukjin Kim <kgene.kim@...sung.com>
Cc: Kukjin Kim <kgene@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Tomasz Figa <tomasz.figa@...il.com>,
Colin Cross <ccross@...gle.com>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
linux-samsung-soc@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, b.zolnierkie@...sung.com
Subject: [PATCH 5/5] cpuidle: exynos: add coupled cpuidle support for Exynos3250
The following patch adds coupled cpuidle support for Exynos3250 to
an existing cpuidle-exynos driver. As a result it enables AFTR mode
to be used by default on Exynos3250 without the need to hot unplug
CPU1 first.
The detailed changelog:
- use exynos_[get,set]_boot_addr() in cpuidle-exynos.c and then make
cpu_boot_reg_base() static
- use exynos_core_restart() in exynos_cpu0_enter_aftr()
- add missing smp_rmb() to exynos_cpu0_enter_aftr() (to make the code
in-sync with the platform SMP code)
- add call_firmware_op(cpu_boot, 1) to exynos_cpu0_enter_aftr()
- use dsb_sev() instead of IPI wakeup for Exynos3250 in
exynos_cpu0_enter_aftr()
- add CPU0 vs CPU1 synchronization based on S5P_PMU_SPARE2 register
for Exynos3250 to cpuidle-exynos.c
- add flush_cache_all() for CPU1/0 before powerdown/AFTR for
Exynos3250 to exynos_wfi_finisher()/exynos_do_idle()
Cc: Daniel Lezcano <daniel.lezcano@...aro.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
arch/arm/mach-exynos/common.h | 4 +++-
arch/arm/mach-exynos/exynos.c | 3 ++-
arch/arm/mach-exynos/firmware.c | 1 +
arch/arm/mach-exynos/platsmp.c | 8 +++----
arch/arm/mach-exynos/pm.c | 51 +++++++++++++++++++++++++++++++++-------
drivers/cpuidle/cpuidle-exynos.c | 3 ++-
6 files changed, 55 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 826367f..bc515f0 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -163,7 +163,9 @@ extern void exynos_set_delayed_reset_assertion(bool enable);
extern void s5p_init_cpu(void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
-extern void __iomem *cpu_boot_reg_base(void);
+extern void exynos_core_restart(u32 core_id);
+extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
+extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr);
static inline void pmu_raw_writel(u32 val, u32 offset)
{
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index c8996b3..c605826 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -264,7 +264,8 @@ static void __init exynos_dt_machine_init(void)
exynos_sysram_init();
#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
- if (of_machine_is_compatible("samsung,exynos4210"))
+ if (of_machine_is_compatible("samsung,exynos4210") ||
+ of_machine_is_compatible("samsung,exynos3250"))
exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
#endif
if (of_machine_is_compatible("samsung,exynos4210") ||
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 0f37d0b..d19b05c 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -48,6 +48,7 @@ static int exynos_do_idle(unsigned long mode)
sysram_ns_base_addr + 0x24);
__raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
if (soc_is_exynos3250()) {
+ flush_cache_all();
exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
SMC_POWERSTATE_IDLE, 0);
exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER,
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index c5c6700..a461be7 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -170,7 +170,7 @@ int exynos_cluster_power_state(int cluster)
S5P_CORE_LOCAL_PWR_EN);
}
-void __iomem *cpu_boot_reg_base(void)
+static void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM5;
@@ -196,7 +196,7 @@ static inline void __iomem *cpu_boot_reg(int cpu)
*
* Currently this is needed only when booting secondary CPU on Exynos3250.
*/
-static void exynos_core_restart(u32 core_id)
+void exynos_core_restart(u32 core_id)
{
u32 val;
@@ -248,7 +248,7 @@ static void exynos_secondary_init(unsigned int cpu)
spin_unlock(&boot_lock);
}
-static int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr)
+int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr)
{
int ret;
@@ -273,7 +273,7 @@ fail:
return ret;
}
-static int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr)
+int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr)
{
int ret;
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 0a7e3af..1b00146 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -22,6 +22,7 @@
#include <asm/firmware.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
+#include <asm/cacheflush.h>
#include <mach/map.h>
@@ -208,6 +209,8 @@ static int exynos_cpu0_enter_aftr(void)
* sequence, let's wait for one of these to happen
*/
while (exynos_cpu_power_state(1)) {
+ unsigned long boot_addr;
+
/*
* The other cpu may skip idle and boot back
* up again
@@ -220,7 +223,11 @@ static int exynos_cpu0_enter_aftr(void)
* boot back up again, getting stuck in the
* boot rom code
*/
- if (__raw_readl(cpu_boot_reg_base()) == 0)
+ ret = exynos_get_boot_addr(1, &boot_addr);
+ if (ret)
+ goto fail;
+ ret = -1;
+ if (boot_addr == 0)
goto abort;
cpu_relax();
@@ -232,11 +239,14 @@ static int exynos_cpu0_enter_aftr(void)
abort:
if (cpu_online(1)) {
+ unsigned long boot_addr = virt_to_phys(exynos_cpu_resume);
+
/*
* Set the boot vector to something non-zero
*/
- __raw_writel(virt_to_phys(exynos_cpu_resume),
- cpu_boot_reg_base());
+ ret = exynos_set_boot_addr(1, boot_addr);
+ if (ret)
+ goto fail;
dsb();
/*
@@ -246,22 +256,42 @@ abort:
while (exynos_cpu_power_state(1) != S5P_CORE_LOCAL_PWR_EN)
cpu_relax();
+ if (soc_is_exynos3250()) {
+ while (!pmu_raw_readl(S5P_PMU_SPARE2) &&
+ !atomic_read(&cpu1_wakeup))
+ cpu_relax();
+
+ if (!atomic_read(&cpu1_wakeup))
+ exynos_core_restart(1);
+ }
+
while (!atomic_read(&cpu1_wakeup)) {
+ smp_rmb();
+
/*
* Poke cpu1 out of the boot rom
*/
- __raw_writel(virt_to_phys(exynos_cpu_resume),
- cpu_boot_reg_base());
- arch_send_wakeup_ipi_mask(cpumask_of(1));
+ ret = exynos_set_boot_addr(1, boot_addr);
+ if (ret)
+ goto fail;
+
+ call_firmware_op(cpu_boot, 1);
+
+ if (soc_is_exynos3250())
+ dsb_sev();
+ else
+ arch_send_wakeup_ipi_mask(cpumask_of(1));
}
}
-
+fail:
return ret;
}
static int exynos_wfi_finisher(unsigned long flags)
{
+ if (soc_is_exynos3250())
+ flush_cache_all();
cpu_do_idle();
return -1;
@@ -282,6 +312,9 @@ static int exynos_cpu1_powerdown(void)
*/
exynos_cpu_power_down(1);
+ if (soc_is_exynos3250())
+ pmu_raw_writel(0, S5P_PMU_SPARE2);
+
ret = cpu_suspend(0, exynos_wfi_finisher);
cpu_pm_exit();
@@ -298,7 +331,9 @@ cpu1_aborted:
static void exynos_pre_enter_aftr(void)
{
- __raw_writel(virt_to_phys(exynos_cpu_resume), cpu_boot_reg_base());
+ unsigned long boot_addr = virt_to_phys(exynos_cpu_resume);
+
+ (void)exynos_set_boot_addr(1, boot_addr);
}
static void exynos_post_enter_aftr(void)
diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c
index 26f5f29..bbd7682 100644
--- a/drivers/cpuidle/cpuidle-exynos.c
+++ b/drivers/cpuidle/cpuidle-exynos.c
@@ -117,7 +117,8 @@ static int exynos_cpuidle_probe(struct platform_device *pdev)
{
int ret;
- if (of_machine_is_compatible("samsung,exynos4210")) {
+ if (of_machine_is_compatible("samsung,exynos4210") ||
+ of_machine_is_compatible("samsung,exynos3250")) {
exynos_cpuidle_pdata = pdev->dev.platform_data;
ret = cpuidle_register(&exynos_coupled_idle_driver,
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists