[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150220043805.GA22128@saruman.tx.rr.com>
Date: Thu, 19 Feb 2015 22:38:05 -0600
From: Felipe Balbi <balbi@...com>
To: zhangfei <zhangfei.gao@...aro.org>
CC: <balbi@...com>, Kishon Vijay Abraham I <kishon@...com>,
<mark.rutland@....com>, Peter Chen <peter.chen@...escale.com>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
"dan . zhao" <dan.zhao@...ilicon.com>,
Wangbinghui <wangbinghui@...ilicon.com>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-usb@...r.kernel.org>
Subject: Re: [PATCH v4 4/4] phy: add phy-hi6220-usb
On Fri, Feb 20, 2015 at 11:07:21AM +0800, zhangfei wrote:
> Hi, Balbi
>
> On 02/18/2015 10:35 PM, Felipe Balbi wrote:
> >On Wed, Feb 18, 2015 at 01:44:21PM +0800, zhangfei wrote:
> >>Hi, Kishon
> >>
> >>On 02/18/2015 01:35 PM, Kishon Vijay Abraham I wrote:
> >>>Hi,
> >>>
> >>>On Thursday 12 February 2015 01:07 PM, Zhangfei Gao wrote:
> >>>>Add usb phy controller for hi6220 platform
> >>>>
> >>>>Signed-off-by: Zhangfei Gao <zhangfei.gao@...aro.org>
> >>>>---
> >>>> drivers/phy/Kconfig | 9 ++
> >>>> drivers/phy/Makefile | 1 +
> >>>> drivers/phy/phy-hi6220-usb.c | 306
> >>>>+++++++++++++++++++++++++++++++++++++++++++
> >>>> 3 files changed, 316 insertions(+)
> >>>> create mode 100644 drivers/phy/phy-hi6220-usb.c
> >>>
> >>>why is this driver in drivers/phy when it doesn't use the generic PHY
> >>>framework at all?
> >>>
> >>
> >>Balbi recommended "new drivers only on drivers/phy/", including usb
> >>phy.
> >
> >but it should use the API too. It's not only about a directory, you need
> >to use the new API.
> >
> >>So Move drivers/usb/phy/phy-hi6220-usb.c to
> >>drivers/phy/phy-hi6220-usb.c, required by Balbi.
> >
> >you're reading what I stated the way you like.
>
> Sorry for my bad understanding.
>
> Still not clear about the otg_set_peripheral, which is required in
> phy-hi6220-usb.c
>
> 1. drivers/usb/dwc2/gadget.c use
> otg_set_peripheral(hsotg->uphy->otg, &hsotg->gadget);
>
> 2. include/linux/phy/phy.h
> struct phy do not have member otg, while struct usb_phy has.
>
> Could you give more hints?
your set_peripheral doesn't do anything, just holds a pointer. Might as
well not implement it. I'll review your driver more fully tomorrow.
There a few things which must be changed.
--
balbi
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists