linux-kernel - [PATCH v5 0/5] Add support for Fujitsu USB host controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1424579140-30567-1-git-send-email-Sneeker.Yeh@tw.fujitsu.com>
Date:	Sun, 22 Feb 2015 12:25:35 +0800
From:	Sneeker Yeh <sneeker.yeh@...il.com>
To:	Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>, Felipe Balbi <balbi@...com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Mathias Nyman <mathias.nyman@...el.com>,
	Grant Likely <grant.likely@...aro.org>,
	Huang Rui <ray.huang@....com>,
	Kishon Vijay Abraham I <kishon@...com>,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-usb@...r.kernel.org, linux-omap@...r.kernel.org
Cc:	Andy Green <andy.green@...aro.org>,
	Jassi Brar <jaswinder.singh@...aro.org>,
	Sneeker Yeh <Sneeker.Yeh@...fujitsu.com>
Subject: [PATCH v5 0/5] Add support for Fujitsu USB host controller

These patches add support for XHCI compliant Host controller found
on Fujitsu Socs, and are based on http://lwn.net/Articles/629162/
The first patch is to add Fujitsu glue layer of Synopsis DesignWare USB3 driver
and last four patch is about quirk implementation of errata in Synopsis
DesignWare USB3 IP.

Patch 1 introduces a quirk with device disconnection management necessary
Synopsys Designware USB3 IP with versions < 3.00a and hardware configuration
DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1. It solves a problem where without the
quirk, that host controller will die after a usb device is disconnected from
port of root hub.

Patch 2 is to set Synopsis quirk in xhci platform driver based on xhci platform
data.

Patch 3 is to add a revison number 2.90a and 3.00a of Synopsis DesignWare USB3
IP core driver.

Patch 4 introduces using a quirk based on a errata of Synopsis
DesignWare USB3 IP which is versions < 3.00a and has hardware configuration
DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1, which cannot be read from software. As a
result this quirk has to be enabled via platform data or device tree.

Patch 5 introduces Fujitsu Specific Glue layer in Synopsis DesignWare USB3 IP
driver. 

Successfully tested on Fujitsu mb86s7x board.

Changes since v4 (RFC):
[https://lkml.org/lkml/2015/2/17/13]
 - based on Felipe's comment, rename dwc3-mb86s70.c to dwc3-fujitsu.c which is
   more generic.
 - based on Mathias's comment, remove unhelpful comment, and change the
   function name of xhci_try_to_clear_csc() to xhci_late_csc_clear_quirk()
   which is more appropriate.  

Changes since v3 (RFC):
[https://lkml.org/lkml/2015/1/25/8]
 - based on Mathias's comment, fix bug and using xhci_port_state_to_neutral()
   helper function to mask out some RW1C bits, prevent writing back all the
   bits read from the PORTSC register.

Changes since v2 (RFC):
[https://lkml.org/lkml/2015/1/19/55]
 - based on Felipe's comment, re-order patches to avoid breaking bisectability,
 - based on Felipe's comment, add comment to structure's member, and sort it
   alphabetically,
 - based on Felipe's comment, add another v2.90 revision number in dwc3 IP.

Changes since v1 (RFC):
[https://lkml.org/lkml/2014/12/15/929]
 - based on Arnd's comment, remove entire unnecessary Fujitsu EHCI/OHCI glue,
 - based on Felipe's comment, fix mis-using of runtime-pm API and setting dma
   mask, remove unnecessary comment, and refactor suspend/resume handler in
   Fujitsu Specific Glue layer in dwc3,
 - based on Felipe's comment, add more commit log and comments in Synopsis
   quirk implementation, and separate it into four patches.

Sneeker Yeh (5):
  xhci: add a quirk for device disconnection errata for Synopsis
    Designware USB3     core
  xhci: Platform: Set Synopsis device disconnection quirk based on
    platform data
  usb: dwc3: add revision number DWC3_REVISION_290A and
    DWC3_REVISION_300A
  usb: dwc3: Add quirk for Synopsis device disconnection errata
  usb: dwc3: add Fujitsu Specific Glue layer

 Documentation/devicetree/bindings/usb/dwc3.txt     |   17 ++
 .../devicetree/bindings/usb/fujitsu-dwc3.txt       |   33 ++++
 drivers/usb/dwc3/Kconfig                           |   10 +
 drivers/usb/dwc3/Makefile                          |    1 +
 drivers/usb/dwc3/core.c                            |    6 +
 drivers/usb/dwc3/core.h                            |    6 +
 drivers/usb/dwc3/dwc3-fujitsu.c                    |  206 ++++++++++++++++++++
 drivers/usb/dwc3/host.c                            |    4 +
 drivers/usb/dwc3/platform_data.h                   |    8 +
 drivers/usb/host/xhci-hub.c                        |    4 +
 drivers/usb/host/xhci-plat.c                       |    3 +
 drivers/usb/host/xhci.c                            |   33 ++++
 drivers/usb/host/xhci.h                            |   24 +++
 include/linux/usb/xhci_pdriver.h                   |    4 +
 14 files changed, 359 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/fujitsu-dwc3.txt
 create mode 100644 drivers/usb/dwc3/dwc3-fujitsu.c

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/