[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1424801297-18354-2-git-send-email-Zubair.Kakakhel@imgtec.com>
Date: Tue, 24 Feb 2015 18:08:15 +0000
From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>
To: <vinod.koul@...el.com>
CC: <dan.j.williams@...el.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <alex@...x-smith.me.uk>,
<Zubair.Kakakhel@...tec.com>
Subject: [PATCH_V2 1/3] dt-bindings: dma: Add binding for jz4780-dma
From: Alex Smith <alex.smith@...tec.com>
Add device tree bindings for the DMA controller on JZ4780 SoCs, used by
the dma-jz4780 driver.
Signed-off-by: Alex Smith <alex.smith@...tec.com>
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>
---
V1 -> V2 None
---
.../devicetree/bindings/dma/jz4780-dma.txt | 61 ++++++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/jz4780-dma.txt
diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
new file mode 100644
index 0000000..ce90011
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
@@ -0,0 +1,61 @@
+* Ingenic JZ4780 DMA Controller
+
+Required properties:
+
+- compatible: Should be "ingenic,jz4780-dma"
+- reg: Should contain the DMA controller registers location and length.
+- interrupts: Should contain the interrupt specifier of the DMA controller.
+- interrupt-parent: Should be the phandle of the interrupt controller that
+- clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
+- #dma-cells: Must be <3>. Number of integer cells in the dmas property of
+ DMA clients (see below).
+
+Optional properties:
+
+- ingenic,reserved-channels: Bitmask of channels to reserve for devices that
+ need a specific channel. These channels will only be assigned when explicitly
+ requested by a client. The primary use for this is channels 0 and 1, which
+ can be configured to have special behaviour for NAND/BCH when using
+ programmable firmware.
+
+Example:
+
+dma: dma@...20000 {
+ compatible = "ingenic,jz4780-dma";
+ reg = <0x13420000 0x10000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu JZ4780_CLK_PDMA>;
+
+ #dma-cells = <3>;
+
+ ingenic,reserved-channels = <0x3>;
+};
+
+DMA clients must use the format described in dma.txt, giving a phandle to the
+DMA controller plus the following 3 integer cells:
+
+1. Transmit request type: The DMA request type for transfers to the device on
+ the allocated channel, as defined in the SoC documentation. If set to 0,
+ transfers to the device will not be allowed on the channel.
+
+2. Receive request type: The DMA request type for transfers from the device on
+ the allocated channel, as defined in the SoC documentation. If set to 0,
+ transfers from the device will not be allowed on the channel.
+
+3. Channel: If set to 0xffffffff, any available channel will be allocated for
+ the client. Otherwise, the exact channel specified will be used. The channel
+ should be reserved on the DMA controller using the ingenic,reserved-channels
+ property.
+
+Example:
+
+uart0: serial@...30000 {
+ ...
+ dmas = <&dma 0x14 0 0xffffffff
+ &dma 0 0x15 0xffffffff>;
+ dma-names = "tx", "rx";
+ ...
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists