[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1424903527-5636-1-git-send-email-sboyd@codeaurora.org>
Date: Wed, 25 Feb 2015 14:32:07 -0800
From: Stephen Boyd <sboyd@...eaurora.org>
To: Mike Turquette <mturquette@...aro.org>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Kenneth Westfield <kwestfie@...eaurora.org>
Subject: [PATCH] clk: qcom: Properly change rates for ahbix clock
The ahbix clock can never be turned off. To switch the rates we
need to switch the mux off the M/N counter to an always on source
(XO), reprogram the M/N counter to get the rate we want and
finally switch back to the M/N counter. Add a new ops structure
for this type of clock so that we can set the rate properly.
Fixes: c99e515a92e9 "clk: qcom: Add IPQ806X LPASS clock controller (LCC) driver"
Cc: Kenneth Westfield <kwestfie@...eaurora.org>
Signed-off-by: Stephen Boyd <sboyd@...eaurora.org>
---
drivers/clk/qcom/clk-rcg.c | 30 ++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-rcg.h | 1 +
drivers/clk/qcom/lcc-ipq806x.c | 5 +----
3 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/qcom/clk-rcg.c b/drivers/clk/qcom/clk-rcg.c
index 0039bd7d3965..49a1b58d4f8c 100644
--- a/drivers/clk/qcom/clk-rcg.c
+++ b/drivers/clk/qcom/clk-rcg.c
@@ -495,6 +495,27 @@ static int clk_rcg_bypass_set_rate(struct clk_hw *hw, unsigned long rate,
return __clk_rcg_set_rate(rcg, rcg->freq_tbl);
}
+static int clk_rcg_lcc_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_rcg *rcg = to_clk_rcg(hw);
+ const struct freq_tbl *f;
+ int ret;
+ u32 gfm = BIT(10);
+
+ f = qcom_find_freq(rcg->freq_tbl, rate);
+ if (!f)
+ return -EINVAL;
+
+ /* Switch to XO to avoid glitches */
+ regmap_update_bits(rcg->clkr.regmap, rcg->ns_reg, gfm, 0);
+ ret = __clk_rcg_set_rate(rcg, f);
+ /* Switch back to M/N */
+ regmap_update_bits(rcg->clkr.regmap, rcg->ns_reg, gfm, gfm);
+
+ return ret;
+}
+
static int __clk_dyn_rcg_set_rate(struct clk_hw *hw, unsigned long rate)
{
struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw);
@@ -543,6 +564,15 @@ const struct clk_ops clk_rcg_bypass_ops = {
};
EXPORT_SYMBOL_GPL(clk_rcg_bypass_ops);
+const struct clk_ops clk_rcg_lcc_ops = {
+ .get_parent = clk_rcg_get_parent,
+ .set_parent = clk_rcg_set_parent,
+ .recalc_rate = clk_rcg_recalc_rate,
+ .determine_rate = clk_rcg_determine_rate,
+ .set_rate = clk_rcg_lcc_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_rcg_lcc_ops);
+
const struct clk_ops clk_dyn_rcg_ops = {
.enable = clk_enable_regmap,
.is_enabled = clk_is_enabled_regmap,
diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
index 687e41f91d7c..d09d06ba278e 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -96,6 +96,7 @@ struct clk_rcg {
extern const struct clk_ops clk_rcg_ops;
extern const struct clk_ops clk_rcg_bypass_ops;
+extern const struct clk_ops clk_rcg_lcc_ops;
#define to_clk_rcg(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg, clkr)
diff --git a/drivers/clk/qcom/lcc-ipq806x.c b/drivers/clk/qcom/lcc-ipq806x.c
index c9ff27b4648b..fb276522173a 100644
--- a/drivers/clk/qcom/lcc-ipq806x.c
+++ b/drivers/clk/qcom/lcc-ipq806x.c
@@ -385,14 +385,11 @@ static struct clk_rcg ahbix_clk = {
},
.freq_tbl = clk_tbl_ahbix,
.clkr = {
- .enable_reg = 0x38,
- .enable_mask = BIT(10), /* toggle the gfmux to select mn/pxo */
.hw.init = &(struct clk_init_data){
.name = "ahbix",
.parent_names = lcc_pxo_pll4,
.num_parents = 2,
- .ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
+ .ops = &clk_rcg_lcc_ops,
},
},
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists