linux-kernel - [PATCH 0/8] ARM OMAP2+ GPMC: fixes and bus children

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1424961956-29353-1-git-send-email-rabel@cit-ec.uni-bielefeld.de>
Date:	Thu, 26 Feb 2015 15:45:48 +0100
From:	Robert ABEL <rabel@...-ec.uni-bielefeld.de>
To:	balbi@...com, rogerq@...com, linux-omap@...r.kernel.org
Cc:	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	tony@...mide.com, linux@....linux.org.uk,
	Robert ABEL <rabel@...-ec.uni-bielefeld.de>
Subject: [PATCH 0/8] ARM OMAP2+ GPMC: fixes and bus children

These are the changes I proposed in three separate patchsets
#([1], [2], [3]) rebased to 3.19 as well as new changes for little bugs
I noticed while preparing this patchset.

1. DEBUG was undefined in source code --> remove offending lines
2. add capability to have busses as children of the GPMC and multiple
   devices on a bus. See [2] for an example DTS syntax.
3. debug output was unaligned --> align it
4. output for copy-pasting to DTS had erroneous timing outputs and
   made it hard to copy-paste --> correct timing values, add comments
   as DTS comments.
5. WAITMONITORINGTIME is expressed as GPMC_CLK cycles for all accesses.
   GPMCFCLKDIVIDER is used as a divider, so it must always be programmed.
6. GPMCFCLKDIVIDER is calculated according to WAITMONITORINGTIME for
   asynchronous accesses inside the driver --> asynchronous accesses now
   completely decoupled from gpmc,sync-clk-ps.
7. WAITMONITORINGTIME was being programmed/shown in GPMC_FCLK cycles instead
   of GPMC_CLK cycles --> add clock domain information where necessary.
8. Calculated values for WAITMONITORINGTIME and CLKACTIVATIONTIME that were
   outside the defined range would not raise an error.
   DEVICESIZE, ATTACHEDDEVICEPAGELENGTH, WAITMONITORINGTIME and
   CLKACTIVATIONTIME would not be marked as incorrect on DTS output.
   --> Fix all of these.

[1]: https://lkml.org/lkml/2015/2/12/495
[2]: https://lkml.org/lkml/2015/2/16/337
[3]: https://lkml.org/lkml/2015/2/24/609

Robert ABEL (9):
  ARM OMAP2+ GPMC: don't undef DEBUG
  ARM OMAP2+ GPMC: add bus children
  ARM OMAP2+ GPMC: fix debug output alignment
  ARM OMAP2+ GPMC: change get_gpmc_timing_reg output for DTS
  ARM OMAP2+ GPMC: always program GPMCFCLKDIVIDER
  ARM OMAP2+ GPMC: calculate GPMCFCLKDIVIDER based on WAITMONITORINGTIME
  ARM OMAP2+ GPMC: fix WAITMONITORINGTIME divider bug
  ARM OMAP2+ GPMC: fix programming/showing reserved timing parameters

 arch/arm/mach-omap2/gpmc-nand.c    |  17 +-
 arch/arm/mach-omap2/gpmc-onenand.c |   4 +-
 arch/arm/mach-omap2/usb-tusb6010.c |   4 +-
 drivers/memory/Makefile            |   2 +
 drivers/memory/omap-gpmc.c         | 313 +++++++++++++++++++++++++++++--------
 include/linux/omap-gpmc.h          |   2 +-
 6 files changed, 265 insertions(+), 77 deletions(-)

-- 
2.3.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/