| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1424965776-4381-3-git-send-email-javier.martinez@collabora.co.uk>
Date: Thu, 26 Feb 2015 16:49:35 +0100
From: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
To: Kukjin Kim <kgene@...nel.org>
Cc: Doug Anderson <dianders@...omium.org>,
Olof Johansson <olof@...om.net>,
Tushar Behera <tushar.b@...sung.com>,
Kevin Hilman <khilman@...aro.org>,
Andreas Faerber <afaerber@...e.de>,
Tyler Baker <tyler.baker@...aro.org>,
Steve Capper <steve.capper@...aro.org>,
Amit Kucheria <amit.kucheria@...aro.org>,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
Javier Martinez Canillas <javier.martinez@...labora.co.uk>
Subject: [PATCH 2/3] ARM: dts: Add WiFi module support for Peach boards
Peach Pit and Pi boards have a WiFi module that is always powered
but needs toggling an enable pin and ungating a 32kHz reference
clock as part of their power sequencing.
Add a dev node for the SDIO slot and a MMC power sequence provider.
Signed-off-by: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 56 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5800-peach-pi.dts | 56 ++++++++++++++++++++++++++++++
2 files changed, 112 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index c4db5aed8a8c..80db9137abdd 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -125,6 +125,13 @@
};
};
};
+
+ mmc1_pwrseq: mmc1_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ clocks = <&max77802 MAX77802_CLK_32K_CP>;
+ clock-names = "ext_clock";
+ };
};
&adc {
@@ -691,6 +698,25 @@
bus-width = <8>;
};
+&mmc_1 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ cap-sdio-irq;
+ card-detect-delay = <200>;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <1>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
+ <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ mmc-pwrseq = <&mmc1_pwrseq>;
+ vqmmc-supply = <&buck10_reg>;
+};
+
&mmc_2 {
status = "okay";
num-slots = <1>;
@@ -710,6 +736,13 @@
pinctrl-names = "default";
pinctrl-0 = <&mask_tpm_reset>;
+ wifi_en: wifi-en {
+ samsung,pins = "gpx0-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
max98090_irq: max98090-irq {
samsung,pins = "gpx0-2";
samsung,pin-function = <0>;
@@ -797,6 +830,29 @@
};
};
+&pinctrl_1 {
+ /* Adjust WiFi drive strengths lower for EMI */
+ sd1_clk: sd1-clk {
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_bus8: sd1-bus-width8 {
+ samsung,pin-drv = <2>;
+ };
+};
+
&pinctrl_2 {
pmic_dvs_2: pmic-dvs-2 {
samsung,pins = "gpj4-2";
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index ca73fb2d2da5..9db2b5927821 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -119,6 +119,13 @@
power-supply = <&tps65090_fet6>;
backlight = <&backlight>;
};
+
+ mmc1_pwrseq: mmc1_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ clocks = <&max77802 MAX77802_CLK_32K_CP>;
+ clock-names = "ext_clock";
+ };
};
&adc {
@@ -653,6 +660,25 @@
bus-width = <8>;
};
+&mmc_1 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ cap-sdio-irq;
+ card-detect-delay = <200>;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <1>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
+ <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ mmc-pwrseq = <&mmc1_pwrseq>;
+ vqmmc-supply = <&buck10_reg>;
+};
+
&mmc_2 {
status = "okay";
num-slots = <1>;
@@ -672,6 +698,13 @@
pinctrl-names = "default";
pinctrl-0 = <&mask_tpm_reset>;
+ wifi_en: wifi-en {
+ samsung,pins = "gpx0-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
max98091_irq: max98091-irq {
samsung,pins = "gpx0-2";
samsung,pin-function = <0>;
@@ -759,6 +792,29 @@
};
};
+&pinctrl_1 {
+ /* Adjust WiFi drive strengths lower for EMI */
+ sd1_clk: sd1-clk {
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pin-drv = <2>;
+ };
+
+ sd1_bus8: sd1-bus-width8 {
+ samsung,pin-drv = <2>;
+ };
+};
+
&pinctrl_2 {
pmic_dvs_2: pmic-dvs-2 {
samsung,pins = "gpj4-2";
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists