[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8151717.nkhnGBri9h@vostro.rjw.lan>
Date: Thu, 26 Feb 2015 19:17:03 +0100
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Boris Brezillon <boris.brezillon@...e-electrons.com>
Cc: Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Peter Zijlstra <peterz@...radead.org>,
Mark Rutland <mark.rutland@....com>,
linux-kernel@...r.kernel.org,
Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [RFC PATCH 0/3] genirq: mixing IRQF_NO_SUSPEND and wakeup sources on shared IRQs
On Thursday, February 26, 2015 04:47:24 PM Boris Brezillon wrote:
> On Thu, 26 Feb 2015 16:44:16 +0100
> "Rafael J. Wysocki" <rjw@...ysocki.net> wrote:
>
> > On Thursday, February 26, 2015 09:03:47 AM Boris Brezillon wrote:
> > > Hi Rafael,
> > >
> > > On Wed, 25 Feb 2015 22:59:36 +0100
> > > "Rafael J. Wysocki" <rjw@...ysocki.net> wrote:
> > >
> > > > On Tuesday, February 24, 2015 10:55:59 AM Boris Brezillon wrote:
> > > > > Hello,
> > > > >
> > > > > I put the IRQF_NO_SUSPEND_SAFE/IRQF_TIMER_SIBLING_OK/WHATEVER_NAME_YOU_CHOOSE
> > > > > debate aside to concentrate on another problem pointed out by Rafael and
> > > > > Mark: the fact that we cannot mix IRQF_NO_SUSPEND and wakeup sources on
> > > > > a shared IRQ line.
> > > > >
> > > > > This is because the wakeup code is prevailing the IRQF_NO_SUSPEND case
> > > > > and will trigger a system wakeup as soon as the IRQ line is tagged as a
> > > > > wakeup source.
> > > > >
> > > > > This series propose an approach to deal with such cases by doing the
> > > > > following:
> > > > > 1/ Prevent any system wakeup when at least one of the IRQ user has set
> > > > > the IRQF_NO_SUSPEND flag
> > > > > 2/ Adapt IRQ handlers so that they can safely be called in suspended
> > > > > state
> > > > > 3/ Let drivers decide when the system should be woken up
> > > > >
> > > > > Let me know what you think of this approach.
> > > >
> > > > So I have the appended patch that should deal with all that too (it doesn't
> > > > rework drivers that need to share NO_SUSPEND IRQs and do wakeup, but that
> > > > can be done on top of it in a straightforward way).
> > > >
> > > > The idea is quite simple. By default, the core replaces the interrupt handlers
> > > > of everyone sharing NO_SUSPEND lines and not using IRQF_NO_SUSPEND with a null
> > > > handler always returning IRQ_NONE at the suspend_device_irqs() time (the
> > > > rationale being that if you don't use IRQF_NO_SUSPEND, then your device has
> > > > no reason to generate interrupts after that point). The original handlers are
> > > > then restored by resume_device_irqs().
> > > >
> > > > However, if the IRQ is configured for wakeup, there may be a reason to generate
> > > > interrupts from a device not using IRQF_NO_SUSPEND. For that, the patch adds
> > > > IRQF_COND_SUSPEND that, if set, will prevent the default behavior described
> > > > above from being applied to irqactions using it if the IRQs in question are
> > > > configured for wakeup. Of course, the users of IRQF_COND_SUSPEND are supposed
> > > > to implement wakeup detection in their interrupt handlers and then call
> > > > pm_system_wakeup() if necessary.
> > >
> > > That patch sounds good to me.
> >
> > But it is still a bit risky. Namely, if the driver in question is sufficiently
> > broken (eg. it may not suspend the device and rely on the fact that its interrupt
> > handler will be run just because it is sharing a "no suspend" IRQ), we may get
> > an interrupt storm.
> >
> > Isn't that a problem?
>
> For me no (I'll fix all the drivers to handle wakeup, and they are all
> already masking interrupts coming from their side in the suspend
> callback).
> I can't talk for other people though.
> The only problem I see here is that you're not informing people that
> they are erroneously mixing IRQF_NO_SUSPEND and !IRQF_NO_SUSPEND anymore
> (you removed the warning backtrace).
> Moreover, you are replacing their handler by a stub when entering
> suspend, so they might end-up receiving spurious interrupts when
> suspended without knowing why ?
>
> How about checking if the number of actions registered with
> IRQF_NO_SUSPEND + those registered with IRQF_COND_SUSPEND (or another
> flag stating that the handler can safely be called in suspended state
> even if it didn't ask for NO_SUSPEND) are equal to the total number of
> registered actions, and complain if it's not the case.
The same idea I had while talking to Peter over IRC. So the patch below
implements that.
> If some actions are offending this rule, you could keep the previous
> behavior by leaving its handler in place when entering suspend so that
> existing drivers/systems will keep working (but with a warning
> backtrace).
Right.
---
include/linux/interrupt.h | 5 +++++
include/linux/irqdesc.h | 1 +
kernel/irq/manage.c | 7 ++++++-
kernel/irq/pm.c | 7 ++++++-
4 files changed, 18 insertions(+), 2 deletions(-)
Index: linux-pm/include/linux/interrupt.h
===================================================================
--- linux-pm.orig/include/linux/interrupt.h
+++ linux-pm/include/linux/interrupt.h
@@ -57,6 +57,10 @@
* IRQF_NO_THREAD - Interrupt cannot be threaded
* IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
* resume time.
+ * IRQF_COND_SUSPEND - If the IRQ is shared with a NO_SUSPEND user, execute this
+ * interrupt handler after suspending interrupts. For system
+ * wakeup devices users need to implement wakeup detection in
+ * their interrupt handlers.
*/
#define IRQF_DISABLED 0x00000020
#define IRQF_SHARED 0x00000080
@@ -70,6 +74,7 @@
#define IRQF_FORCE_RESUME 0x00008000
#define IRQF_NO_THREAD 0x00010000
#define IRQF_EARLY_RESUME 0x00020000
+#define IRQF_COND_SUSPEND 0x00040000
#define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD)
Index: linux-pm/include/linux/irqdesc.h
===================================================================
--- linux-pm.orig/include/linux/irqdesc.h
+++ linux-pm/include/linux/irqdesc.h
@@ -78,6 +78,7 @@ struct irq_desc {
#ifdef CONFIG_PM_SLEEP
unsigned int nr_actions;
unsigned int no_suspend_depth;
+ unsigned int cond_suspend_depth;
unsigned int force_resume_depth;
#endif
#ifdef CONFIG_PROC_FS
Index: linux-pm/kernel/irq/pm.c
===================================================================
--- linux-pm.orig/kernel/irq/pm.c
+++ linux-pm/kernel/irq/pm.c
@@ -43,9 +43,12 @@ void irq_pm_install_action(struct irq_de
if (action->flags & IRQF_NO_SUSPEND)
desc->no_suspend_depth++;
+ else if (action->flags & IRQF_COND_SUSPEND)
+ desc->cond_suspend_depth++;
WARN_ON_ONCE(desc->no_suspend_depth &&
- desc->no_suspend_depth != desc->nr_actions);
+ (desc->no_suspend_depth +
+ desc->cond_suspend_depth) != desc->nr_actions);
}
/*
@@ -61,6 +64,8 @@ void irq_pm_remove_action(struct irq_des
if (action->flags & IRQF_NO_SUSPEND)
desc->no_suspend_depth--;
+ else if (action->flags & IRQF_COND_SUSPEND)
+ desc->cond_suspend_depth--;
}
static bool suspend_device_irq(struct irq_desc *desc, int irq)
Index: linux-pm/kernel/irq/manage.c
===================================================================
--- linux-pm.orig/kernel/irq/manage.c
+++ linux-pm/kernel/irq/manage.c
@@ -1474,8 +1474,13 @@ int request_threaded_irq(unsigned int ir
* otherwise we'll have trouble later trying to figure out
* which interrupt is which (messes up the interrupt freeing
* logic etc).
+ *
+ * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and
+ * it is mutually exclusive with IRQF_NO_SUSPEND.
*/
- if ((irqflags & IRQF_SHARED) && !dev_id)
+ if (((irqflags & IRQF_SHARED) && !dev_id) ||
+ (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
+ ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
return -EINVAL;
desc = irq_to_desc(irq);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists