| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAF8JNhKS6qF6bVCXX2ocBAGhTmp80HDN+JnV1z9MD1i2W4=P8Q@mail.gmail.com>
Date: Thu, 26 Feb 2015 14:03:58 -0800
From: Ping Cheng <pinglinux@...il.com>
To: Benjamin Tissoires <benjamin.tissoires@...hat.com>
Cc: josep.sanchez.ferreres@....fib.upc.edu,
ACHARD Frederic <frederic.achard@...e.fr>,
Jiri Kosina <jkosina@...e.cz>,
Jason Gerecke <killertofu@...il.com>,
linux-input <linux-input@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 2/2] HID: wacom: add full support of the Wacom Bamboo PAD
On Thu, Feb 26, 2015 at 8:28 AM, Benjamin Tissoires
<benjamin.tissoires@...hat.com> wrote:
> The stylus of this device works just fine out of the box.
> The touch is seen by default as a mouse with relative events and some
> gestures.
> The wireless and the wired version have slightly different firmwares, but
> the debug mode 2 on the feature 2 is common to the 2 devices. In this mode,
> all the reports are emitted through the debug interface (pen, raw touch
> and mouse emulation), so we have to re-route manually the events.
>
> We keep the Pen interface as a HID_GENERIC one because it works, and only
> parse the raw touches while discarding the mouse emulation & gestures.
>
> Switching the default in raw mode allows us to have a consistent user
> experience accross all the multitouch touchpads (and enable the touch part
> of the devices).
>
> Note that the buttons of this devices are reported through the touch
> interface. There is no 'Pad' interface. It seemed more natural to have
> the BTN_LEFT and BTN_RIGHT reported with the touch because they are
> placed under the touch interface and it looks like they belong to the
> touch part.
>
> Tested-by: Josep Sanchez Ferreres <josep.sanchez.ferreres@....fib.upc.edu>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@...hat.com>
Acked-by: Ping Cheng <pingc@...om.com> for the series.
Cheers,
Ping
> ---
> changes in v3:
> - store touch_down information to not send pen events before the touch has been
> released
>
> changes in v2:
> - re-route the pen events in the pen HID interface
>
> drivers/hid/wacom_sys.c | 24 +++++++++++
> drivers/hid/wacom_wac.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/hid/wacom_wac.h | 5 +++
> 3 files changed, 133 insertions(+)
>
> diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
> index b3c2395..957699f 100644
> --- a/drivers/hid/wacom_sys.c
> +++ b/drivers/hid/wacom_sys.c
> @@ -406,6 +406,9 @@ static int wacom_query_tablet_data(struct hid_device *hdev,
> else if (features->type == WACOM_27QHDT) {
> return wacom_set_device_mode(hdev, 131, 3, 2);
> }
> + else if (features->type == BAMBOO_PAD) {
> + return wacom_set_device_mode(hdev, 2, 2, 2);
> + }
> } else if (features->device_type == BTN_TOOL_PEN) {
> if (features->type <= BAMBOO_PT && features->type != WIRELESS) {
> return wacom_set_device_mode(hdev, 2, 2, 2);
> @@ -1425,6 +1428,21 @@ static int wacom_probe(struct hid_device *hdev,
> goto fail_allocate_inputs;
> }
>
> + /*
> + * Bamboo Pad has a generic hid handling for the Pen, and we switch it
> + * into debug mode for the touch part.
> + * We ignore the other interfaces.
> + */
> + if (features->type == BAMBOO_PAD) {
> + if (features->pktlen == WACOM_PKGLEN_PENABLED) {
> + features->type = HID_GENERIC;
> + } else if ((features->pktlen != WACOM_PKGLEN_BPAD_TOUCH) &&
> + (features->pktlen != WACOM_PKGLEN_BPAD_TOUCH_USB)) {
> + error = -ENODEV;
> + goto fail_shared_data;
> + }
> + }
> +
> /* set the default size in case we do not get them from hid */
> wacom_set_default_phy(features);
>
> @@ -1459,6 +1477,12 @@ static int wacom_probe(struct hid_device *hdev,
> features->y_max = 4096;
> }
>
> + /*
> + * Same thing for Bamboo PAD
> + */
> + if (features->type == BAMBOO_PAD)
> + features->device_type = BTN_TOOL_FINGER;
> +
> if (hdev->bus == BUS_BLUETOOTH)
> features->quirks |= WACOM_QUIRK_BATTERY;
>
> diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
> index 16e8d28..bbf72f9 100644
> --- a/drivers/hid/wacom_wac.c
> +++ b/drivers/hid/wacom_wac.c
> @@ -1826,6 +1826,91 @@ static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
> return 0;
> }
>
> +static void wacom_bamboo_pad_pen_event(struct wacom_wac *wacom,
> + unsigned char *data)
> +{
> + unsigned char prefix;
> +
> + /*
> + * We need to reroute the event from the debug interface to the
> + * pen interface.
> + * We need to add the report ID to the actual pen report, so we
> + * temporary overwrite the first byte to prevent having to kzalloc/kfree
> + * and memcpy the report.
> + */
> + prefix = data[0];
> + data[0] = WACOM_REPORT_BPAD_PEN;
> +
> + /*
> + * actually reroute the event.
> + * No need to check if wacom->shared->pen is valid, hid_input_report()
> + * will check for us.
> + */
> + hid_input_report(wacom->shared->pen, HID_INPUT_REPORT, data,
> + WACOM_PKGLEN_PENABLED, 1);
> +
> + data[0] = prefix;
> +}
> +
> +static int wacom_bamboo_pad_touch_event(struct wacom_wac *wacom,
> + unsigned char *data)
> +{
> + struct input_dev *input = wacom->input;
> + unsigned char *finger_data, prefix;
> + unsigned id;
> + int x, y;
> + bool valid;
> +
> + prefix = data[0];
> +
> + for (id = 0; id < wacom->features.touch_max; id++) {
> + valid = !!(prefix & BIT(id)) &&
> + !wacom->shared->stylus_in_proximity;
> +
> + input_mt_slot(input, id);
> + input_mt_report_slot_state(input, MT_TOOL_FINGER, valid);
> +
> + if (!valid)
> + continue;
> +
> + finger_data = data + 1 + id * 3;
> + x = finger_data[0] | ((finger_data[1] & 0x0f) << 8);
> + y = (finger_data[2] << 4) | (finger_data[1] >> 4);
> +
> + input_report_abs(input, ABS_MT_POSITION_X, x);
> + input_report_abs(input, ABS_MT_POSITION_Y, y);
> + }
> +
> + input_mt_sync_frame(input);
> +
> + input_report_key(input, BTN_LEFT, prefix & 0x40);
> + input_report_key(input, BTN_RIGHT, prefix & 0x80);
> +
> + /* keep touch state for pen event */
> + wacom->shared->touch_down = !!prefix &&
> + !wacom->shared->stylus_in_proximity;
> +
> + return 1;
> +}
> +
> +static int wacom_bamboo_pad_irq(struct wacom_wac *wacom, size_t len)
> +{
> + unsigned char *data = wacom->data;
> +
> + if (!((len == WACOM_PKGLEN_BPAD_TOUCH) ||
> + (len == WACOM_PKGLEN_BPAD_TOUCH_USB)) ||
> + (data[0] != WACOM_REPORT_BPAD_TOUCH))
> + return 0;
> +
> + if (data[1] & 0x01)
> + wacom_bamboo_pad_pen_event(wacom, &data[1]);
> +
> + if (data[1] & 0x02)
> + return wacom_bamboo_pad_touch_event(wacom, &data[9]);
> +
> + return 0;
> +}
> +
> static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
> {
> unsigned char *data = wacom->data;
> @@ -1962,6 +2047,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
> sync = wacom_bpt_irq(wacom_wac, len);
> break;
>
> + case BAMBOO_PAD:
> + sync = wacom_bamboo_pad_irq(wacom_wac, len);
> + break;
> +
> case WIRELESS:
> sync = wacom_wireless_irq(wacom_wac, len);
> break;
> @@ -2300,6 +2389,13 @@ int wacom_setup_pentouch_input_capabilities(struct input_dev *input_dev,
> 0, 0);
> }
> break;
> + case BAMBOO_PAD:
> + __clear_bit(ABS_MISC, input_dev->absbit);
> + input_mt_init_slots(input_dev, features->touch_max,
> + INPUT_MT_POINTER);
> + __set_bit(BTN_LEFT, input_dev->keybit);
> + __set_bit(BTN_RIGHT, input_dev->keybit);
> + break;
> }
> return 0;
> }
> @@ -2953,6 +3049,12 @@ static const struct wacom_features wacom_features_0x30C =
> { "Wacom ISDv5 30C", .type = WACOM_24HDT, /* Touch */
> .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30A, .touch_max = 10,
> .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
> +static const struct wacom_features wacom_features_0x318 =
> + { "Wacom USB Bamboo PAD", 4095, 4095, /* Touch */
> + .type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
> +static const struct wacom_features wacom_features_0x319 =
> + { "Wacom Wireless Bamboo PAD", 4095, 4095, /* Touch */
> + .type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
> static const struct wacom_features wacom_features_0x323 =
> { "Wacom Intuos P M", 21600, 13500, 1023, 31,
> INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
> @@ -3105,6 +3207,8 @@ const struct hid_device_id wacom_ids[] = {
> { USB_DEVICE_WACOM(0x314) },
> { USB_DEVICE_WACOM(0x315) },
> { USB_DEVICE_WACOM(0x317) },
> + { USB_DEVICE_WACOM(0x318) },
> + { USB_DEVICE_WACOM(0x319) },
> { USB_DEVICE_WACOM(0x323) },
> { USB_DEVICE_WACOM(0x32A) },
> { USB_DEVICE_WACOM(0x32B) },
> diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
> index e42efbe..a3d0828 100644
> --- a/drivers/hid/wacom_wac.h
> +++ b/drivers/hid/wacom_wac.h
> @@ -33,6 +33,8 @@
> #define WACOM_PKGLEN_MTTPC 40
> #define WACOM_PKGLEN_DTUS 68
> #define WACOM_PKGLEN_PENABLED 8
> +#define WACOM_PKGLEN_BPAD_TOUCH 32
> +#define WACOM_PKGLEN_BPAD_TOUCH_USB 64
>
> /* wacom data size per MT contact */
> #define WACOM_BYTES_PER_MT_PACKET 11
> @@ -67,6 +69,8 @@
> #define WACOM_REPORT_24HDT 1
> #define WACOM_REPORT_WL 128
> #define WACOM_REPORT_USB 192
> +#define WACOM_REPORT_BPAD_PEN 3
> +#define WACOM_REPORT_BPAD_TOUCH 16
>
> /* device quirks */
> #define WACOM_QUIRK_MULTI_INPUT 0x0001
> @@ -122,6 +126,7 @@ enum {
> BAMBOO_PT,
> WACOM_24HDT,
> WACOM_27QHDT,
> + BAMBOO_PAD,
> TABLETPC, /* add new TPC below */
> TABLETPCE,
> TABLETPC2FG,
> --
> 2.1.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists