| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1425052615-29093-8-git-send-email-rabel@cit-ec.uni-bielefeld.de>
Date: Fri, 27 Feb 2015 16:56:54 +0100
From: Robert ABEL <rabel@...-ec.uni-bielefeld.de>
To: balbi@...com, rogerq@...com, linux-omap@...r.kernel.org
Cc: linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
tony@...mide.com, linux@....linux.org.uk,
Robert ABEL <rabel@...-ec.uni-bielefeld.de>
Subject: [PATCH 7/8 v4] ARM OMAP2+ GPMC: fix WAITMONITORINGTIME divider bug
The WAITMONITORINGTIME is expressed as a number of GPMC_CLK clock cycles,
even though the access is defined as asynchronous, and no GPMC_CLK clock
is provided to the external device. Still, GPMCFCLKDIVIDER is used as a divider
for the GPMC clock, so it must be programmed to define the
correct WAITMONITORINGTIME delay.
This patch correctly computes WAITMONITORINGTIME in GPMC_CLK cycles instead of GPMC_FCLK cycles,
both during programming (gpmc_cs_set_timings) and during retrieval (gpmc_cs_show_timings).
Signed-off-by: Robert ABEL <rabel@...-ec.uni-bielefeld.de>
---
drivers/memory/omap-gpmc.c | 128 +++++++++++++++++++++++++++++++++++----------
1 file changed, 101 insertions(+), 27 deletions(-)
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 8ee335d..d091065 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -170,6 +170,11 @@
*/
#define GPMC_NR_IRQ 2
+enum gpmc_clk_domain {
+ GPMC_CD_FCLK,
+ GPMC_CD_CLK
+};
+
struct gpmc_cs_data {
const char *name;
@@ -268,16 +273,54 @@ static unsigned long gpmc_get_fclk_period(void)
return rate;
}
-static unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+/**
+ * gpmc_get_clk_period - get period of selected clock domain in ps
+ * @cs Chip Select Region.
+ * @cd Clock Domain.
+ *
+ * GPMC_CS_CONFIG1 GPMCFCLKDIVIDER for cs has to be setup
+ * prior to calling this function with GPMC_CD_CLK.
+ */
+static unsigned long gpmc_get_clk_period(int cs, enum gpmc_clk_domain cd)
+{
+
+ unsigned long tick_ps = gpmc_get_fclk_period();
+ u32 l;
+ int div;
+
+ switch (cd) {
+ case GPMC_CD_CLK:
+ /* get current clk divider */
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+ div = (l & 0x03) + 1;
+ /* get GPMC_CLK period */
+ tick_ps *= div;
+ break;
+ case GPMC_CD_FCLK:
+ /* FALL-THROUGH */
+ default:
+ break;
+ }
+
+ return tick_ps;
+
+}
+
+static unsigned int gpmc_ns_to_clk_ticks(unsigned int time_ns, int cs, enum gpmc_clk_domain cd)
{
unsigned long tick_ps;
/* Calculate in picosecs to yield more exact results */
- tick_ps = gpmc_get_fclk_period();
+ tick_ps = gpmc_get_clk_period(cs, cd);
return (time_ns * 1000 + tick_ps - 1) / tick_ps;
}
+static unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+{
+ return gpmc_ns_to_clk_ticks(time_ns, /* any CS */ 0, GPMC_CD_FCLK);
+}
+
static unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
{
unsigned long tick_ps;
@@ -288,9 +331,14 @@ static unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
return (time_ps + tick_ps - 1) / tick_ps;
}
+unsigned int gpmc_clk_ticks_to_ns(unsigned ticks, int cs, enum gpmc_clk_domain cd)
+{
+ return ticks * gpmc_get_clk_period(cs, cd) / 1000;
+}
+
unsigned int gpmc_ticks_to_ns(unsigned int ticks)
{
- return ticks * gpmc_get_fclk_period() / 1000;
+ return gpmc_clk_ticks_to_ns(ticks, /* any CS */ 0, GPMC_CD_FCLK);
}
static unsigned int gpmc_ticks_to_ps(unsigned int ticks)
@@ -346,18 +394,24 @@ static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p)
* @st_bit: Start Bit
* @end_bit: End Bit. Must be >= @st_bit.
* @name: DTS node name, w/o "gpmc,"
+ * @cd: Clock Domain of timing parameter.
+ * @shift: Parameter value left shifts @shift, which is then printed instead of value.
* @raw: Raw Format Option.
* raw format: gpmc,name = <value>
* tick format: gpmc,name = <value> /‍* x ns -- y ns; x ticks *‍/
* Where x ns -- y ns result in the same tick value.
* @noval: Parameter values equal to 0 are not printed.
- * @shift: Parameter value left shifts @shift, which is then printed instead of value.
* @return: Specified timing parameter (after optional @shift).
*
*/
-static int get_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
- bool raw, bool noval, int shift,
- const char *name)
+static int get_gpmc_timing_reg(
+ /* timing specifiers */
+ int cs, int reg, int st_bit, int end_bit,
+ const char *name, const enum gpmc_clk_domain cd,
+ /* value transform */
+ int shift,
+ /* format specifiers */
+ bool raw, bool noval)
{
u32 l;
int nr_bits;
@@ -377,8 +431,8 @@ static int get_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
unsigned int time_ns_min = 0;
if (l)
- time_ns_min = gpmc_ticks_to_ns(l - 1) + 1;
- time_ns = gpmc_ticks_to_ns(l);
+ time_ns_min = gpmc_clk_ticks_to_ns(l - 1, cs, cd) + 1;
+ time_ns = gpmc_clk_ticks_to_ns(l, cs, cd);
pr_info("gpmc,%s = <%u> /* %u ns - %u ns; %i ticks */\n",
name, time_ns, time_ns_min, time_ns, l);
} else {
@@ -393,13 +447,15 @@ static int get_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
pr_info("cs%i %s: 0x%08x\n", cs, #config, \
gpmc_cs_read_reg(cs, config))
#define GPMC_GET_RAW(reg, st, end, field) \
- get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 0, 0, field)
+ get_gpmc_timing_reg(cs, (reg), (st), (end), field, GPMC_CD_FCLK, 0, 1, 0)
#define GPMC_GET_RAW_BOOL(reg, st, end, field) \
- get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 1, 0, field)
+ get_gpmc_timing_reg(cs, (reg), (st), (end), field, GPMC_CD_FCLK, 0, 1, 1)
#define GPMC_GET_RAW_SHIFT(reg, st, end, shift, field) \
- get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 1, (shift), field)
+ get_gpmc_timing_reg(cs, (reg), (st), (end), field, GPMC_CD_FCLK, (shift), 1, 1)
#define GPMC_GET_TICKS(reg, st, end, field) \
- get_gpmc_timing_reg(cs, (reg), (st), (end), 0, 0, 0, field)
+ get_gpmc_timing_reg(cs, (reg), (st), (end), field, GPMC_CD_FCLK, 0, 0, 0)
+#define GPMC_GET_TICKS_CD(reg, st, end, field, cd) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), field, (cd), 0, 0, 0)
static void gpmc_show_regs(int cs, const char *desc)
{
@@ -467,7 +523,7 @@ static void gpmc_cs_show_timings(int cs, const char *desc)
GPMC_GET_TICKS(GPMC_CS_CONFIG6, 0, 3, "bus-turnaround-ns");
GPMC_GET_TICKS(GPMC_CS_CONFIG6, 8, 11, "cycle2cycle-delay-ns");
- GPMC_GET_TICKS(GPMC_CS_CONFIG1, 18, 19, "wait-monitoring-ns");
+ GPMC_GET_TICKS_CD(GPMC_CS_CONFIG1, 18, 19, "wait-monitoring-ns", GPMC_CD_CLK);
GPMC_GET_TICKS(GPMC_CS_CONFIG1, 25, 26, "clk-activation-ns");
GPMC_GET_TICKS(GPMC_CS_CONFIG6, 16, 19, "wr-data-mux-bus-ns");
@@ -479,8 +535,22 @@ static inline void gpmc_cs_show_timings(int cs, const char *desc)
}
#endif
+/**
+ * set_gpmc_timing_reg - set a single timing parameter for Chip Select Region.
+ * Caller is expected to have initialized CONFIG1 GPMCFCLKDIVIDER
+ * prior to calling this function with @cd equal to GPMC_CD_CLK.
+ *
+ * @cs: Chip Select Region.
+ * @reg: GPMC_CS_CONFIGn register offset.
+ * @st_bit: Start Bit
+ * @end_bit: End Bit. Must be >= @st_bit.
+ * @time: Timing parameter in ns.
+ * @cd: Timing parameter clock domain.
+ * @name: Timing parameter name.
+ * @return: 0 on success, -1 on error.
+ */
static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
- int time, const char *name)
+ int time, enum gpmc_clk_domain cd, const char *name)
{
u32 l;
int ticks, mask, nr_bits;
@@ -488,12 +558,12 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
if (time == 0)
ticks = 0;
else
- ticks = gpmc_ns_to_ticks(time);
+ ticks = gpmc_ns_to_clk_ticks(time, cs, cd);
nr_bits = end_bit - st_bit + 1;
mask = (1 << nr_bits) - 1;
if (ticks > mask) {
- pr_err("%s: GPMC error! CS%d: %s: %d ns, %d ticks > %d\n",
+ pr_err("%s: GPMC CS%d: %s %d ns, %d ticks > %d ticks\n",
__func__, cs, name, time, ticks, mask);
return -1;
@@ -503,7 +573,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
#ifdef DEBUG
pr_info(
"GPMC CS%d: %-17s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
- cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
+ cs, name, ticks, gpmc_get_clk_period(cs, cd) * ticks / 1000,
(l >> st_bit) & mask, time);
#endif
l &= ~(mask << st_bit);
@@ -513,11 +583,14 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
return 0;
}
-#define GPMC_SET_ONE(reg, st, end, field) \
- if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
- t->field, #field) < 0) \
+#define GPMC_SET_ONE_CD(reg, st, end, field, cd) \
+ if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
+ t->field, (cd), #field) < 0) \
return -1
+#define GPMC_SET_ONE(reg, st, end, field) \
+ GPMC_SET_ONE_CD(reg, st, end, field, GPMC_CD_FCLK)
+
/**
* gpmc_calc_waitmonitoring_divider - calculate proper GPMCFCLKDIVIDER based on WAITMONITORINGTIME
* WAITMONITORINGTIME will be _at least_ as long as desired, i.e.
@@ -634,22 +707,23 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t, const struct gpmc_
GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround);
GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay);
- GPMC_SET_ONE(GPMC_CS_CONFIG1, 18, 19, wait_monitoring);
- GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation);
-
if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
if (gpmc_capability & GPMC_HAS_WR_ACCESS)
GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+ l &= ~0x03;
+ l |= (div - 1);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
+
+ GPMC_SET_ONE_CD(GPMC_CS_CONFIG1, 18, 19, wait_monitoring, GPMC_CD_CLK);
+ GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation);
+
#ifdef DEBUG
pr_info("GPMC CS%d CLK period is %lu ns (div %d)\n",
cs, (div * gpmc_get_fclk_period()) / 1000, div);
#endif
- l &= ~0x03;
- l |= (div - 1);
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
gpmc_cs_bool_timings(cs, &t->bool_timings);
gpmc_cs_show_timings(cs, "after gpmc_cs_set_timings");
--
2.3.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists