Message-ID: <87mw3y2wad.fsf@free.fr>
Date:	Sat, 28 Feb 2015 10:57:30 +0100
From:	Robert Jarzmik <robert.jarzmik@...e.fr>
To:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Arnd Bergmann <arnd@...db.de>, Lee Jones <lee.jones@...aro.org>
Cc:	Nicolas Pitre <nicolas.pitre@...aro.org>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Daniel Mack <daniel@...que.org>,
	Haojian Zhuang <haojian.zhuang@...il.com>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	Grant Likely <grant.likely@...aro.org>,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	Russell King - ARM Linux <linux@....linux.org.uk>,
	Dmitry Eremin-Solenikov <dbaryshkov@...il.com>
Subject: Re: [PATCH v4 2/4] mfd: lubbock_cplds: add lubbock IO board

Robert Jarzmik <robert.jarzmik@...e.fr> writes:

> Hi Arnd and Greg,
It's been a week, backlog ping ?

>
> I have this driver I'm upstreaming, which comes out of
> arch/arm/mach-pxa/lubbock.c. As for the reason it is extracted, see submitted
> commit [1] for reference.
>
> The main question is : where does it belong in the kernel ?
>
> The driver is :
>  - for the CPLDs on the Lubbock development platform, which is more or less an
>    old motherboard for Intel Xscale pxa255 SoC (see [2] for more details)
>  - these CPLDs control :
>    - interrupt muxing towards the SoC
>    - several leds
>    - switches read back
>    For the whole patch, see [4]
>
> Lee's position is that it doesn't belong to drivers/mfd, see [3].
>
> So where should I submit it ? And more generally, where should CPLDs drivers be
> pushed in the kernel tree ?
>
> If there is no solution, I'll fallback through arch/arm/plat-pxa, not very nice,
> but it has to land somewhere, I don't want lubbock to remain broken.
>
> Cheers.
>
> --
> Robert
>
> [1] Reason of extraction / commit message
>     mfd: lubbock_cplds: add lubbock IO board
>     
>     Lubbock () board is the IO motherboard of the Intel PXA25x Development
>     Platform, which supports the Lubbock pxa25x soc board.
>     
>     Historically, this support was in arch/arm/mach-pxa/lubbock.c. When
>     gpio-pxa was moved to drivers/pxa, it became a driver, and its
>     initialization and probing happened at postcore initcall. The lubbock
>     code used to install the chained lubbock interrupt handler at init_irq()
>     time.
>     
>     The consequence of the gpio-pxa change is that the installed chained irq
>     handler lubbock_irq_handler() was overwritten in pxa_gpio_probe(_dt)(),
>     removing :
>      - the handler
>      - the falling edge detection setting of GPIO0, which revealed the
>        interrupt request from the lubbock IO board.
>     
>     As a fix, move the gpio0 chained handler setup to a place where we have
>     the guarantee that pxa_gpio_probe() was called before, so that lubbock
>     handler becomes the true IRQ chained handler of GPIO0, demuxing the
>     lubbock IO board interrupts.
>     
>     This patch moves all that handling to a mfd driver. It's only purpose
>     for the time being is the interrupt handling, but in the future it
>     should encompass all the motherboard CPLDs handling :
>      - leds
>      - switches
>      - hexleds
>     
>     Signed-off-by: Robert Jarzmik <robert.jarzmik@...e.fr>
>
> [2] Board description by Nicolas
>>> The Lubbock is an ancient development board (circa 2003) using a CPLD to 
>>> multiplex a couple things on the board.  I really doubt anyone would 
>>> reprogram this CPLD at this point. So I'd treat it just like another 
>>> interrupt controller + random peripherals that will never change.  And 
>>> yes, maybe a more appropriate name is needed.
>
> [3] Lee's position
>>> > I don't think this is correct either.  CPLD handling would probably be
>>> > slightly less out of place in drivers/misc, but perhaps a new
>>> > subsystem for PLDs/CPLDs/FPGAs would be more appropriate
>>> > drivers/programmables or similar maybe.
>>> >
> ...
>>> > I'm pretty convinced that it doesn't belong in MFD now, but it doesn't
>>> > mean I'm going to leave you on the curb.  I'd like to help you get it
>>> > into a better home.
>>> > 
>>> > [...]
>>> > > Is not only a irqchip because, as explained at the bottom of the commit message,
>>> > > quoting myself :
>>> > >   This patch moves all that handling to a mfd driver. It's only purpose
>>> > >   for the time being is the interrupt handling, but in the future it
>>> > >   should encompass all the motherboard CPLDs handling :
>>> > >    - leds
>>> > >    - switches
>>> > >    - hexleds
>>> > 
>>> > I had a conversation about this on IRC yesterday and some good
>>> > points/questions were posed.  This is a difficult area, because you
>>> > can program these things to do whatever you like.  Depending on the
>>> > 'intention' (and it is only an intention -- someone else can come
>>> > along and reprogram these devices on a whim), the CPLD code could live
>>> > anywhere.  If you wanted to put watchdog functionality in there, then
>>> > there is an argument for it to live in drivers/watchdog, etc etc.  So
>>> > just because the plan is to support a few (i.e. more than one) simple
>>> > devices, it doesn't necessarily mean that the handling should be done
>>> > in MFD.
>>> > 
>>> > Yesterday I was asked "Are you wanting to restrict drivers in
>>> > drivers/mfd to those that make use of MFD_CORE functionality?".  My
>>> > answer to that was "No, however; I only want devices which
>>> > _intrinsically_ operate in multiple subsystems", which these
>>> > programmables no not do.
>>> > 
>>> > FYI, you're not on your own here.  There is at least one of these
>>> > devices in the kernel already and upon a short inspection there
>>> > appears to be a number of Out-of-Tree (OoT) drivers out there which
>>> > will require a home in Mainline sooner or later.
>>> > 
>
> [4] Whole patch
> https://lkml.org/lkml/2015/1/24/90

-- 
Robert
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists