[ 0.000000] Linux version 4.0.0-rc1-celeron-00037-gec3360c (thomas@maggie) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #218 SMP Sat Feb 28 10:54:22 CET 2015 [ 0.000000] Command line: root=/dev/sda3 console=ttyS0,115200N8 panic=30 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000079578fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079579000-0x00000000795a8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000795a9000-0x00000000795fcfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000795fd000-0x000000007970dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007970e000-0x0000000079a7afff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079a7b000-0x0000000079a7bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079a7c000-0x0000000079abdfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079abe000-0x0000000079c2bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079c2c000-0x0000000079ff9fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079ffa000-0x0000000079ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Q1900B-ITX, BIOS P1.70 11/04/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07A800000 mask FFF800000 uncachable [ 0.000000] 2 base 07B000000 mask FFF000000 uncachable [ 0.000000] 3 base 07C000000 mask FFC000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a0f000, 0x01a0ffff] PGTABLE [ 0.000000] BRK [0x01a10000, 0x01a10fff] PGTABLE [ 0.000000] BRK [0x01a11000, 0x01a11fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x79200000-0x793fffff] [ 0.000000] [mem 0x79200000-0x793fffff] page 2M [ 0.000000] BRK [0x01a12000, 0x01a12fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x60000000-0x791fffff] [ 0.000000] [mem 0x60000000-0x791fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff] [ 0.000000] [mem 0x40000000-0x5fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20100000-0x3fffffff] [ 0.000000] [mem 0x20100000-0x201fffff] page 4k [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] BRK [0x01a13000, 0x01a13fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x79400000-0x79578fff] [ 0.000000] [mem 0x79400000-0x79578fff] page 4k [ 0.000000] BRK [0x01a14000, 0x01a14fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x795a9000-0x795fcfff] [ 0.000000] [mem 0x795a9000-0x795fcfff] page 4k [ 0.000000] init_memory_mapping: [mem 0x79a7b000-0x79a7bfff] [ 0.000000] [mem 0x79a7b000-0x79a7bfff] page 4k [ 0.000000] init_memory_mapping: [mem 0x79abe000-0x79c2bfff] [ 0.000000] [mem 0x79abe000-0x79c2bfff] page 4k [ 0.000000] init_memory_mapping: [mem 0x79ffa000-0x79ffffff] [ 0.000000] [mem 0x79ffa000-0x79ffffff] page 4k [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x0000000079683080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000007968E3C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150204/tbfadt-618) [ 0.000000] ACPI: DSDT 0x0000000079683190 00B229 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x000000007970DF80 000040 [ 0.000000] ACPI: APIC 0x000000007968E4D0 000084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000007968E558 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000007968E5A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: LPIT 0x000000007968E5E0 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D) [ 0.000000] ACPI: AAFT 0x000000007968E6E8 0000D7 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000007968E7C0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x000000007968E7F8 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x000000007968EF60 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x000000007968F1F0 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x000000007968F370 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076c00000-ffff880078bfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000079ffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020100000-0x0000000079578fff] [ 0.000000] node 0: [mem 0x00000000795a9000-0x00000000795fcfff] [ 0.000000] node 0: [mem 0x0000000079a7b000-0x0000000079a7bfff] [ 0.000000] node 0: [mem 0x0000000079abe000-0x0000000079c2bfff] [ 0.000000] node 0: [mem 0x0000000079ffa000-0x0000000079ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff] [ 0.000000] On node 0 totalpages: 497117 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7744 pages used for memmap [ 0.000000] DMA32 zone: 493122 pages, LIFO batch:31 [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x4f]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] res edge lint[0xcb]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] res edge lint[0x9d]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high dfl lint[0x5e]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x79579000-0x795a8fff] [ 0.000000] PM: Registered nosave memory: [mem 0x795fd000-0x7970dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7970e000-0x79a7afff] [ 0.000000] PM: Registered nosave memory: [mem 0x79a7c000-0x79abdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x79c2c000-0x79ff9fff] [ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880079200000 s79704 r0 d30888 u524288 [ 0.000000] pcpu-alloc: s79704 r0 d30888 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 489288 [ 0.000000] Kernel command line: root=/dev/sda3 console=ttyS0,115200N8 panic=30 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes [ 0.000000] log_buf_len min size: 262144 bytes [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 251304(95%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1940648K/1988468K available (5080K kernel code, 526K rwdata, 1828K rodata, 780K init, 768K bss, 47820K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:1024 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] Maximum core-clock to bus-clock ratio: 0x18 [ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz [ 0.000000] TSC runs at 1996800 KHz [ 0.000000] lapic_timer_frequency = 332800 [ 0.000000] tsc: Detected 1996.800 MHz processor [ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.60 BogoMIPS (lpj=7987200) [ 0.011038] pid_max: default: 32768 minimum: 301 [ 0.015680] ACPI: Core revision 20150204 [ 0.045999] ACPI: All ACPI Tables successfully acquired [ 0.051565] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.058290] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.065691] CPU: Physical Processor ID: 0 [ 0.069723] CPU: Processor Core ID: 0 [ 0.073404] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.079429] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.091258] mce: CPU supports 6 MCE banks [ 0.095293] CPU0: Thermal monitoring enabled (TM1) [ 0.100100] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.105516] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.111918] Freeing SMP alternatives memory: 20K (ffffffff81948000 - ffffffff8194d000) [ 0.120642] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.166207] TSC deadline timer enabled [ 0.166212] smpboot: CPU0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (fam: 06, model: 37, stepping: 03) [ 0.175705] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.186112] ... version: 3 [ 0.190133] ... bit width: 40 [ 0.194239] ... generic registers: 2 [ 0.198260] ... value mask: 000000ffffffffff [ 0.203584] ... max period: 000000ffffffffff [ 0.208907] ... fixed-purpose events: 3 [ 0.212925] ... event mask: 0000000700000003 [ 0.219210] x86: Booting SMP configuration: [ 0.223423] .... node #0, CPUs: #1 #2 #3 [ 0.281599] x86: Booted up 1 node, 4 CPUs [ 0.285822] smpboot: Total of 4 processors activated (15974.40 BogoMIPS) [ 0.293022] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.301362] devtmpfs: initialized [ 0.304964] PM: Registering ACPI NVS region [mem 0x795fd000-0x7970dfff] (1118208 bytes) [ 0.313261] RTC time: 9:56:33, date: 02/28/15 [ 0.317901] NET: Registered protocol family 16 [ 0.329130] cpuidle: using governor ladder [ 0.341274] cpuidle: using governor menu [ 0.345254] ACPI: bus type PCI registered [ 0.349300] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.358626] PCI: not using MMCONFIG [ 0.362127] PCI: Using configuration type 1 for base access [ 0.377727] ACPI: Added _OSI(Module Device) [ 0.381924] ACPI: Added _OSI(Processor Device) [ 0.386385] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.391098] ACPI: Added _OSI(Processor Aggregator Device) [ 0.415279] ACPI: Dynamic OEM Table Load: [ 0.419350] ACPI: SSDT 0xFFFF880078D66400 0003D7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.429283] ACPI: Dynamic OEM Table Load: [ 0.433356] ACPI: SSDT 0xFFFF880078D66800 0003DE (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.443950] ACPI: Dynamic OEM Table Load: [ 0.448020] ACPI: SSDT 0xFFFF880078F13000 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.457856] ACPI: Dynamic OEM Table Load: [ 0.461925] ACPI: SSDT 0xFFFF880078C73B40 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.474001] ACPI: Interpreter enabled [ 0.477689] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580) [ 0.486979] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580) [ 0.496287] ACPI: (supports S0 S3 S4 S5) [ 0.500215] ACPI: Using IOAPIC for interrupt routing [ 0.505391] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.516443] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.525634] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.547845] ACPI: Power Resource [USBC] (on) [ 0.554453] ACPI: Power Resource [PLPE] (on) [ 0.559221] ACPI: Power Resource [PLPE] (on) [ 0.575729] ACPI: Power Resource [CLK0] (on) [ 0.580109] ACPI: Power Resource [CLK1] (on) [ 0.660049] ACPI: Power Resource [FN00] (off) [ 0.665866] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.672070] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.680735] \_SB_.PCI0:_OSC invalid UUID [ 0.680738] _OSC request data:1 1f 0 [ 0.680746] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.688164] PCI host bridge to bus 0000:00 [ 0.692280] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.697783] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 0.703972] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 0.710163] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.716355] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.723242] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.730127] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 0.737015] pci_bus 0000:00: root bus resource [mem 0x80000000-0xd0716ffe] [ 0.743909] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.744135] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.744152] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff] [ 0.744165] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref] [ 0.744178] pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087] [ 0.744416] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.744439] pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077] [ 0.744450] pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063] [ 0.744461] pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057] [ 0.744471] pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043] [ 0.744482] pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f] [ 0.744493] pci 0000:00:13.0: reg 0x24: [mem 0xd0716000-0xd07167ff] [ 0.744549] pci 0000:00:13.0: PME# supported from D3hot [ 0.744751] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.744773] pci 0000:00:14.0: reg 0x10: [mem 0xd0700000-0xd070ffff 64bit] [ 0.744841] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.745017] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.750775] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.750803] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff] [ 0.750819] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff] [ 0.750931] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.751133] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.751159] pci 0000:00:1b.0: reg 0x10: [mem 0xd0710000-0xd0713fff 64bit] [ 0.751239] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.751436] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.751508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.751704] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 0.751776] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.751969] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.752041] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.752238] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.752310] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.752510] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.752775] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.752813] pci 0000:00:1f.3: reg 0x10: [mem 0xd0714000-0xd071401f] [ 0.752886] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.753242] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.758327] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.758350] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.758380] pci 0000:02:00.0: reg 0x18: [mem 0xd0604000-0xd0604fff 64bit] [ 0.758399] pci 0000:02:00.0: reg 0x20: [mem 0xd0600000-0xd0603fff 64bit pref] [ 0.758500] pci 0000:02:00.0: supports D1 D2 [ 0.758504] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.758561] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.772269] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.777250] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.777256] pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff] [ 0.777346] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.782417] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.787425] pci_bus 0000:00: on NUMA node 0 [ 0.789188] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.796509] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.803830] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.811150] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.818462] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.825787] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.834270] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.841583] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.852256] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.857298] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.862966] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.871078] vgaarb: loaded [ 0.873795] vgaarb: bridge control possible 0000:00:02.0 [ 0.879239] SCSI subsystem initialized [ 0.883018] libata version 3.00 loaded. [ 0.883041] ACPI: bus type USB registered [ 0.887098] usbcore: registered new interface driver usbfs [ 0.892613] usbcore: registered new interface driver hub [ 0.897962] usbcore: registered new device driver usb [ 0.903066] Linux video capture interface: v2.00 [ 0.907741] PCI: Using ACPI for IRQ routing [ 0.917852] PCI: pci_cache_line_size set to 64 bytes [ 0.917896] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] [ 0.917900] e820: reserve RAM buffer [mem 0x79579000-0x7bffffff] [ 0.917903] e820: reserve RAM buffer [mem 0x795fd000-0x7bffffff] [ 0.917906] e820: reserve RAM buffer [mem 0x79a7c000-0x7bffffff] [ 0.917909] e820: reserve RAM buffer [mem 0x79c2c000-0x7bffffff] [ 0.917912] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.918161] Switched to clocksource refined-jiffies [ 0.923194] pnp: PnP ACPI init [ 0.926352] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.926614] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.932549] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.938485] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.944418] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.944687] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.950627] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.951625] pnp 00:03: [dma 3] [ 0.951926] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 PNP0401 (active) [ 0.952480] pnp 00:04: [dma 0 disabled] [ 0.952572] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.953481] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.960458] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.967090] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.973714] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.980338] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 0.986965] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.993591] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.000215] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.006841] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved [ 1.013469] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.016770] pnp: PnP ACPI: found 6 devices [ 1.028886] Switched to clocksource acpi_pm [ 1.033119] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 1.033126] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 1.033131] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 1.033142] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 1.033152] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 1.033157] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 1.033161] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 [ 1.033170] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 1.033177] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 [ 1.033182] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 [ 1.033192] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 1.033196] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.033200] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.033205] pci 0000:00:1c.2: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 1.033209] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.033213] pci 0000:00:1c.3: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 1.033217] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.033221] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.033225] pci 0000:00:1c.2: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.033229] pci 0000:00:1c.3: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.033239] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff] [ 1.040062] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 1.047838] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref] [ 1.055607] pci 0000:00:1c.2: BAR 8: assigned [mem 0x80600000-0x807fffff] [ 1.062427] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref] [ 1.070205] pci 0000:00:1c.3: BAR 8: assigned [mem 0x80a00000-0x80bfffff] [ 1.077024] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80c00000-0x80dfffff 64bit pref] [ 1.084794] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 1.090913] pci 0000:00:1c.2: BAR 7: assigned [io 0x2000-0x2fff] [ 1.097035] pci 0000:00:1c.3: BAR 7: assigned [io 0x3000-0x3fff] [ 1.103159] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.108150] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 1.114273] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff] [ 1.121089] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 1.128865] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.133855] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 1.139976] pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff] [ 1.146795] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref] [ 1.154571] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 1.159568] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 1.165691] pci 0000:00:1c.2: bridge window [mem 0x80600000-0x807fffff] [ 1.172507] pci 0000:00:1c.2: bridge window [mem 0x80800000-0x809fffff 64bit pref] [ 1.180280] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 1.185270] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 1.191393] pci 0000:00:1c.3: bridge window [mem 0x80a00000-0x80bfffff] [ 1.198209] pci 0000:00:1c.3: bridge window [mem 0x80c00000-0x80dfffff 64bit pref] [ 1.205982] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 1.205986] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 1.205990] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 1.205994] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 1.205997] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 1.206001] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 1.206005] pci_bus 0000:00: resource 10 [mem 0x80000000-0xd0716ffe] [ 1.206009] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 1.206013] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff] [ 1.206016] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 1.206020] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 1.206024] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.206028] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref] [ 1.206032] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 1.206035] pci_bus 0000:03: resource 1 [mem 0x80600000-0x807fffff] [ 1.206039] pci_bus 0000:03: resource 2 [mem 0x80800000-0x809fffff 64bit pref] [ 1.206043] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 1.206047] pci_bus 0000:04: resource 1 [mem 0x80a00000-0x80bfffff] [ 1.206050] pci_bus 0000:04: resource 2 [mem 0x80c00000-0x80dfffff 64bit pref] [ 1.206095] NET: Registered protocol family 2 [ 1.210691] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.217987] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 1.224701] TCP: Hash tables configured (established 16384 bind 16384) [ 1.231297] TCP: reno registered [ 1.234550] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.240598] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.247125] NET: Registered protocol family 1 [ 1.251538] pci 0000:00:02.0: Video device with shadowed ROM [ 1.251768] PCI: CLS 64 bytes, default 64 [ 1.252122] microcode: CPU0 sig=0x30673, pf=0x4, revision=0x321 [ 1.258063] microcode: CPU1 sig=0x30673, pf=0x4, revision=0x321 [ 1.264023] microcode: CPU2 sig=0x30673, pf=0x4, revision=0x321 [ 1.269963] microcode: CPU3 sig=0x30673, pf=0x4, revision=0x321 [ 1.275997] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.285147] Scanning for low memory corruption every 60 seconds [ 1.292060] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.300982] zpool: loaded [ 1.303629] zbud: loaded [ 1.307085] ntfs: driver 2.1.31 [Flags: R/O]. [ 1.311564] fuse init (API version 7.23) [ 1.316535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.323958] io scheduler noop registered [ 1.327906] io scheduler deadline registered (default) [ 1.333851] intel_idle: MWAIT substates: 0x33000020 [ 1.333855] intel_idle: v0.4 model 0x37 [ 1.333858] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.334329] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.342705] ACPI: Power Button [PWRB] [ 1.346462] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.354843] ACPI: Sleep Button [SLPB] [ 1.358610] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.366036] ACPI: Power Button [PWRF] [ 1.374979] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.380669] ACPI: Thermal Zone [TZ01] (27 C) [ 1.385013] GHES: HEST is not enabled! [ 1.388974] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 1.416017] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.429338] hpet: number irqs doesn't agree with number of timers [ 1.435645] Non-volatile memory driver v1.3 [ 1.440071] rdac: device handler registered [ 1.444524] hp_sw: device handler registered [ 1.448822] emc: device handler registered [ 1.452945] alua: device handler registered [ 1.457221] ahci 0000:00:13.0: version 3.0 [ 1.457380] ahci 0000:00:13.0: controller can't do DEVSLP, turning off [ 1.478076] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode [ 1.486196] ahci 0000:00:13.0: flags: 64bit ncq led clo pio slum part deso [ 1.494948] scsi host0: ahci [ 1.499584] scsi host1: ahci [ 1.502617] ata1: SATA max UDMA/133 abar m2048@0xd0716000 port 0xd0716100 irq 87 [ 1.510039] ata2: DUMMY [ 1.512541] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.518657] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.524201] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.529813] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.543151] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc9000003a000, d0:50:99:1a:cf:2c, XID 0c000800 IRQ 88 [ 1.553441] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.562068] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.567335] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.575146] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00001810 [ 1.583623] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.584584] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.591402] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.598648] usb usb1: Product: xHCI Host Controller [ 1.603554] usb usb1: Manufacturer: Linux 4.0.0-rc1-celeron-00037-gec3360c xhci-hcd [ 1.611238] usb usb1: SerialNumber: 0000:00:14.0 [ 1.616185] hub 1-0:1.0: USB hub found [ 1.619983] hub 1-0:1.0: 6 ports detected [ 1.625449] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.630706] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.639204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.646019] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.653266] usb usb2: Product: xHCI Host Controller [ 1.658173] usb usb2: Manufacturer: Linux 4.0.0-rc1-celeron-00037-gec3360c xhci-hcd [ 1.665858] usb usb2: SerialNumber: 0000:00:14.0 [ 1.670819] hub 2-0:1.0: USB hub found [ 1.674664] hub 2-0:1.0: 1 port detected [ 1.678972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.685535] ehci-pci: EHCI PCI platform driver [ 1.690026] uhci_hcd: USB Universal Host Controller Interface driver [ 1.696461] usbcore: registered new interface driver usb-storage [ 1.702536] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.712761] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.717782] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.724222] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 1.731629] rtc_cmos 00:00: RTC can wake from S4 [ 1.737042] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.743224] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 1.750166] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258) [ 1.767055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.777295] saa7146: register extension 'budget_av' [ 1.782241] usbcore: registered new interface driver dvb_usb_ttusb2 [ 1.790071] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com [ 1.798549] Intel P-state driver initializing. [ 1.803693] hidraw: raw HID events driver (C) Jiri Kosina [ 1.809349] usbcore: registered new interface driver usbhid [ 1.814968] usbhid: USB HID core driver [ 1.818920] TCP: cubic registered [ 1.827163] Magic number: 3:922:930 [ 1.830608] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.837792] rtc_cmos 00:00: setting system clock to 2015-02-28 09:56:35 UTC (1425117395) [ 1.837804] ata1.00: ATA-8: ST31000524AS, JC4B, max UDMA/133 [ 1.837807] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.858629] ata1.00: configured for UDMA/133 [ 1.858673] PM: Hibernation image not present or could not be loaded. [ 1.863145] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5 [ 1.872523] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.872791] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.887304] sd 0:0:0:0: [sda] Write Protect is off [ 1.892209] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.892459] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.934962] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.957837] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 1.965795] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.982163] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities [ 1.990826] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities [ 2.036966] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.044823] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 2.075486] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 2.082402] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.089696] devtmpfs: mounted [ 2.089698] usb 1-2: Product: USB2.0 Hub [ 2.097234] hub 1-2:1.0: USB hub found [ 2.101424] Freeing unused kernel memory: 780K (ffffffff81885000 - ffffffff81948000) [ 2.101725] hub 1-2:1.0: 3 ports detected [ 2.113461] Write protecting the kernel read-only data: 8192k [ 2.121386] Freeing unused kernel memory: 1052K (ffff8800014f9000 - ffff880001600000) [ 2.130717] Freeing unused kernel memory: 220K (ffff8800017c9000 - ffff880001800000) [ 2.275375] tsc: Refined TSC clocksource calibration: 1999.997 MHz [ 2.287636] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 2.479149] usb 1-3: New USB device found, idVendor=0b48, idProduct=300d [ 2.486040] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.493329] usb 1-3: Product: TT-USB2.0 [ 2.497658] usb 1-3: Manufacturer: TechnoTrend [ 2.502258] usb 1-3: SerialNumber: LHJNON [ 2.507257] dvb-usb: found a 'Technotrend TT-connect CT-3650' in warm state. [ 2.515073] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 2.523679] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 2.532750] DVB: registering new adapter (Technotrend TT-connect CT-3650) [ 2.542763] ttusb2: CI initialized. [ 2.546348] usb 1-3: DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... [ 2.561516] usb 1-3: DVB: registering adapter 0 frontend 1 (NXP TDA10048HN DVB-T)... [ 2.570118] IR keymap rc-tt-1500 not found [ 2.574321] Registered IR keymap rc-empty [ 2.578637] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0/input6 [ 2.589598] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0 [ 2.599769] dvb-usb: schedule remote query interval to 150 msecs. [ 2.839052] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 2.995347] systemd[1]: Failed to insert module 'autofs4' [ 3.001638] systemd[1]: Failed to insert module 'ipv6' [ 3.007402] systemd[1]: Set hostname to . [ 3.044908] random: systemd urandom read with 75 bits of entropy available [ 3.282666] Switched to clocksource tsc [ 3.311766] LVM: Logical Volume autoactivation enabled. [ 3.317079] LVM: Activation generator successfully completed. [ 4.017684] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 4.058810] systemd[1]: Starting Replay Read-Ahead Data... [ 4.076052] systemd[1]: Starting Collect Read-Ahead Data... [ 4.095759] systemd[1]: Expecting device dev-ttyS0.device... [ 4.103587] systemd-readahead[88]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 4.127389] systemd[1]: Starting Syslog Socket. [ 4.143702] systemd[1]: Listening on Syslog Socket. [ 4.147620] random: nonblocking pool is initialized [ 4.153565] systemd[1]: Starting Delayed Shutdown Socket. [ 4.171265] systemd[1]: Listening on Delayed Shutdown Socket. [ 4.177075] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 4.195487] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.202507] systemd[1]: Starting LVM2 metadata daemon socket. [ 4.231803] systemd[1]: Listening on LVM2 metadata daemon socket. [ 4.237997] systemd[1]: Starting Journal Socket. [ 4.251589] systemd[1]: Listening on Journal Socket. [ 4.256688] systemd[1]: Mounted Huge Pages File System. [ 4.261982] systemd[1]: Starting Create dynamic rule for /dev/root link... [ 4.284494] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 4.293711] systemd[1]: Starting Create static device nodes in /dev... [ 4.312405] systemd[1]: Mounting POSIX Message Queue File System... [ 4.328084] systemd[1]: Starting Journal Service... [ 4.355621] systemd[1]: Started Journal Service. [ 4.612007] dvb-usb: recv bulk message failed: -110 [ 4.616964] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0) [ 4.720371] systemd-journald[93]: Vacuuming done, freed 0 bytes [ 5.501935] systemd-udevd[125]: starting version 208 [ 5.585582] EXT4-fs (sda3): re-mounted. Opts: (null) [ 6.628159] dvb-usb: recv bulk message failed: -110 [ 6.633068] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0) [ 6.642513] dvb-usb: Technotrend TT-connect CT-3650 successfully initialized and connected. [ 8.673079] Adding 2097148k swap on /dev/sda1. Priority:42 extents:1 across:2097148k FS [ 9.294414] EXT4-fs (sda5): barriers disabled [ 10.246960] EXT4-fs (sda5): mounted filesystem with writeback data mode. Opts: data=writeback,barrier=0 [ 12.971201] r8169 0000:02:00.0 eth0: link down [ 12.971262] r8169 0000:02:00.0 eth0: link down [ 13.557176] systemd-journald[93]: Received request to flush runtime journal from PID 1 [ 14.656839] r8169 0000:02:00.0 eth0: link up