[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <54F3C433.3000400@atmel.com>
Date: Mon, 2 Mar 2015 10:00:19 +0800
From: Bo Shen <voice.shen@...el.com>
To: Manuel Lauss <manuel.lauss@...il.com>,
Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
CC: Mark Brown <broonie@...nel.org>,
Manuel Lauss <manuel.lauss@...glemail.com>,
Liam Girdwood <lrg@...mlogic.co.uk>,
"Richard Purdie" <richard@...nedhand.com>,
<patches@...nsource.wolfsonmicro.com>,
alsa-devel <alsa-devel@...a-project.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-sound@...r.kernel.org>, LKML <linux-kernel@...r.kernel.org>
Subject: Re: [alsa-devel] [PATCH] ASoC: wm8731: let codec to manage clock
by itself
On 02/16/2015 08:58 PM, Manuel Lauss wrote:
> On Mon, Feb 16, 2015 at 11:31 AM, Charles Keepax
> <ckeepax@...nsource.wolfsonmicro.com> wrote:
>> On Thu, Feb 12, 2015 at 04:23:06PM +0800, Bo Shen wrote:
>>> Hi All,
>>>
>>> On 02/05/2015 03:35 PM, Bo Shen wrote:
>>>> Let the wm8731 codec to manage clock by itself.
>>>>
>>>> Signed-off-by: Bo Shen <voice.shen@...el.com>
>>>> ---
>>>>
>>>> sound/soc/codecs/wm8731.c | 28 ++++++++++++++++++++++++++++
>>>> 1 file changed, 28 insertions(+)
>>>
>>> Any comments for this patch (aka ping?)
>>
>> I preferred the idea of having the clock as optional and from the
>> discussion on the last patch it didn't look too tricky to
>
> me too
OK, I will keep the clock as optional.
>> achieve. OTOH I think the Atmel system is the only one that uses
>> both this CODEC and common clock so it doesn't look like this
>> would cause any problems, but might be nice for this not to be
>> one more thing for someone to fix up when moving a system to
>> common clock.
>
> Not quite, there's one MIPS platform I maintain which needs a patch
> like the one below (tested):
Do I need to seed the following patch together or you send it?
> diff --git a/arch/mips/alchemy/devboards/db1200.c
> b/arch/mips/alchemy/devboards/db1200.c
> index 8c13675..aa01ab2 100644
> --- a/arch/mips/alchemy/devboards/db1200.c
> +++ b/arch/mips/alchemy/devboards/db1200.c
> @@ -19,6 +19,8 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> #include <linux/dma-mapping.h>
> #include <linux/gpio.h>
> #include <linux/i2c.h>
> @@ -862,6 +864,12 @@ int __init db1200_dev_setup(void)
> irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
> irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
>
> + /* register the 12MHz crystal for the WM8731 I2S codec */
> + c = clk_register_fixed_rate(NULL, "wm8731xtal", NULL,
> + CLK_IS_ROOT, 12000000);
> + if (!IS_ERR(c))
> + clk_register_clkdev(c, "mclk", "0-001b");
> +
> i2c_register_board_info(0, db1200_i2c_devs,
> ARRAY_SIZE(db1200_i2c_devs));
> spi_register_board_info(db1200_spi_devs,
> diff --git a/arch/mips/alchemy/devboards/db1300.c
> b/arch/mips/alchemy/devboards/db1300.c
> index 1c64fdb..1aa01c8 100644
> --- a/arch/mips/alchemy/devboards/db1300.c
> +++ b/arch/mips/alchemy/devboards/db1300.c
> @@ -5,6 +5,8 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> #include <linux/dma-mapping.h>
> #include <linux/gpio.h>
> #include <linux/gpio_keys.h>
> @@ -799,6 +801,12 @@ int __init db1300_dev_setup(void)
> if (platform_driver_register(&db1300_wm97xx_driver))
> pr_warn("DB1300: failed to init touch pen irq support!\n");
>
> + /* register the 12MHz crystal for the WM8731 I2S codec */
> + c = clk_register_fixed_rate(NULL, "wm8731xtal", NULL,
> + CLK_IS_ROOT, 12000000);
> + if (!IS_ERR(c))
> + clk_register_clkdev(c, "mclk", "0-001b");
> +
> /* Audio PSC clock is supplied by codecs (PSC1, 2) */
> __raw_writel(PSC_SEL_CLK_SERCLK,
> (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
>
Best Regards,
Bo Shen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists