[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150302210501.GJ13270@amd>
Date: Mon, 2 Mar 2015 22:05:01 +0100
From: Pavel Machek <pavel@....cz>
To: NeilBrown <neilb@...e.de>
Cc: Samuel Ortiz <sameo@...ux.intel.com>,
Tony Lindgren <tony@...mide.com>,
Lee Jones <lee.jones@...aro.org>,
Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
GTA04 owners <gta04-owner@...delico.com>,
linux-omap@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org
Subject: Re: [PATCH 07/15] twl4030_charger: allow fine control of charger
current.
Hi!
> + /* ichg values in uA. If any are 'large', we set CGAIN to
> + * '1' which doubles the range for half the precision.
> + */
> + int ichg_eoc, ichg_lo, ichg_hi, cur;
We should really get uA_t.
[Plus, this is not kernel comment style, but...]
> + /* For ichg_eoc, reg value must be 100XXXX000, we only
> + * set the XXXX in high nibble.
> + */
Confused. High nibble is 0xf0, right?
> + /* And finally, set the current. This is stored in
> + * two registers. */
> + reg = ua2regval(bci->cur, cgain);
> + /* we have only 10 bit */
bits
> @@ -562,6 +698,14 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
> if (!pdata)
> pdata = twl4030_bci_parse_dt(&pdev->dev);
>
> + bci->ichg_eoc = 80100; /* Stop charging when current drops to here */
> + bci->ichg_lo = 241000; /* low threshold */
Low
> + bci->ichg_hi = 500000; /* High threshold */
Acked-by: Pavel Machek <pavel@....cz>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists