[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Tue, 3 Mar 2015 11:57:47 +0100
From: Maxime Coquelin <maxime.coquelin@...com>
To: Peter Griffin <peter.griffin@...aro.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <patrice.chotard@...com>,
<srinivas.kandagatla@...il.com>, <chris@...ntf.net>,
<ulf.hansson@...aro.org>
CC: <lee.jones@...aro.org>, <devicetree@...r.kernel.org>,
<linux-mmc@...r.kernel.org>, <peppe.cavallaro@...com>
Subject: Re: [PATCH v2 6/8] mmc: sdhci-st: Update the quirks for this controller.
On 02/26/2015 02:10 PM, Peter Griffin wrote:
> Some additional quirks need to be enabled now we support UHS
> modes. This avoids some spurious warnings like
>
> "Got data interrupt 0x00000002 even though no data operation was in progress"
>
> Testing on stih410-b2120 board achieves the following speeds
> with HS200 eMMC card.
>
> max-frequency = 200Mhz
> /dev/mmcblk0p1:
> Timing buffered disk reads: 270 MB in 3.02 seconds = 89.54 MB/sec
>
> max-frequency = 100Mhz
> root@...ian-armhf:~# hdparm -t /dev/mmcblk0p1
> /dev/mmcblk0p1:
> Timing buffered disk reads: 210 MB in 3.00 seconds = 70.00 MB/sec
>
> max-frequency = 50Mhz
> root@...ian-armhf:~# hdparm -t /dev/mmcblk0p1
> /dev/mmcblk0p1:
> Timing buffered disk reads: 118 MB in 3.00 seconds = 39.28 MB/sec
>
> This is better than the 3.10 kernel which achieves 77.59 MB/sec
> at 200Mhz clock (same board/soc/eMMC).
>
> Signed-off-by: Peter Griffin <peter.griffin@...aro.org>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@...com>
> ---
> drivers/mmc/host/sdhci-st.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
Acked-by: Maxime Coquelin <maxime.coquelin@...com>
Thanks,
Maxime
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists