[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20150304211319.GC14457@ns203013.ovh.net>
Date: Wed, 4 Mar 2015 22:13:19 +0100
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Boris BREZILLON <boris.brezillon@...e-electrons.com>,
Ludovic Desroches <ludovic.desroches@...el.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: Re: [PATCH] ARM: at91/dt: add uart0 to sama5d3 DT
On 17:26 Wed 04 Mar , Nicolas Ferre wrote:
> Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>
please keep in Cc for at91 related work
Best Regards,
J.
> ---
> arch/arm/boot/dts/sama5d3.dtsi | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index e30fee2edd55..def05e20e9d6 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -26,6 +26,7 @@
> serial2 = &usart1;
> serial3 = &usart2;
> serial4 = &usart3;
> + serial5 = &uart0;
> gpio0 = &pioA;
> gpio1 = &pioB;
> gpio2 = &pioC;
> @@ -206,6 +207,17 @@
> status = "disabled";
> };
>
> + uart0: serial@...24000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xf0024000 0x100>;
> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart0>;
> + clocks = <&uart0_clk>;
> + clock-names = "usart";
> + status = "disabled";
> + };
> +
> pwm0: pwm@...2c000 {
> compatible = "atmel,sama5d3-pwm";
> reg = <0xf002c000 0x300>;
> @@ -764,6 +776,14 @@
> };
> };
>
> + uart0 {
> + pinctrl_uart0: uart0-0 {
> + atmel,pins =
> + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* conflicts with PWMFI2, ISI_D8 */
> + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with ISI_PCK */
> + };
> + };
> +
> usart0 {
> pinctrl_usart0: usart0-0 {
> atmel,pins =
> @@ -1098,6 +1118,12 @@
> atmel,clk-output-range = <0 66000000>;
> };
>
> + uart0_clk: uart0_clk {
> + #clock-cells = <0>;
> + reg = <16>;
> + atmel,clk-output-range = <0 66000000>;
> + };
> +
> twi0_clk: twi0_clk {
> reg = <18>;
> #clock-cells = <0>;
> --
> 2.1.3
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists