[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1425457809-6888-1-git-send-email-yguerrini@tomshardware.fr>
Date: Wed, 4 Mar 2015 09:30:09 +0100
From: Yannick Guerrini <yguerrini@...shardware.fr>
To: <airlied@...ux.ie>
CC: <trivial@...nel.org>, <dri-devel@...ts.freedesktop.org>,
<linux-kernel@...r.kernel.org>,
Yannick Guerrini <yguerrini@...shardware.fr>
Subject: [PATCH] drm: Fix trivial typos in comments
Change 'pixes' to 'pixels'
Change 'enabel' to 'enable'
Change 'enabeling' to 'enabling'
Signed-off-by: Yannick Guerrini <yguerrini@...shardware.fr>
---
drivers/gpu/drm/drm_modes.c | 4 ++--
drivers/gpu/drm/i2c/adv7511.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 487d0e3..2cca85f 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -278,7 +278,7 @@ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,
hblank = drm_mode->hdisplay * hblank_percentage /
(100 * HV_FACTOR - hblank_percentage);
hblank -= hblank % (2 * CVT_H_GRANULARITY);
- /* 14. find the total pixes per line */
+ /* 14. find the total pixels per line */
drm_mode->htotal = drm_mode->hdisplay + hblank;
drm_mode->hsync_end = drm_mode->hdisplay + hblank / 2;
drm_mode->hsync_start = drm_mode->hsync_end -
@@ -1209,7 +1209,7 @@ EXPORT_SYMBOL(drm_mode_connector_list_update);
* <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
*
* The intermediate drm_cmdline_mode structure is required to store additional
- * options from the command line modline like the force-enabel/disable flag.
+ * options from the command line modline like the force-enable/disable flag.
*
* Returns:
* True if a valid modeline has been parsed, false otherwise.
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
index fa140e0..61aa824 100644
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -573,7 +573,7 @@ static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
* goes low the adv7511 is reset and the outputs are disabled
* which might cause the monitor to go to standby again. To
* avoid this we ignore the HDP pin for the first few seconds
- * after enabeling the output.
+ * after enabling the output.
*/
regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
ADV7511_REG_POWER2_HDP_SRC_MASK,
--
1.9.5.msysgit.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists