| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 4 Mar 2015 16:16:41 +0530
From: Vineet Gupta <Vineet.Gupta1@...opsys.com>
To: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Jisheng Zhang <jszhang@...vell.com>,
Alexey Brodkin <Alexey.Brodkin@...opsys.com>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linus walleij" <linus.walleij@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Alexandre Courbot <gnurou@...il.com>,
Jamie Iles <jamie@...ieiles.com>
Subject: Re: [PATCH] irq-dw-apb-ictl: convert to platform device
+CC LinusW, Alexandre, Jamie
On Wednesday 04 March 2015 02:30 PM, Sebastian Hesselbarth wrote:
> On 04.03.2015 04:11, Jisheng Zhang wrote:
>> On Tue, 3 Mar 2015 06:56:59 -0800
>> Alexey Brodkin <Alexey.Brodkin@...opsys.com> wrote:
>>> This allows utilization of probe deferral if master interrupt controller
>>> was not yet probed.
>>>
>>> In my case there's an DW APB GPIO configured as interrupt controller
>>> which is a master for DW APB INTC.
>>>
>>> Interrupt controller sub-node of DW APB GPIO gets parsed only on DW APB
>>> GPIO real probe - before that slave interrupt controllers cannot resolve
>>> its master connection which lead to failures on probes of devices that
>>> use DW APB INTC as its interrupt controller.
> Alexey,
>
> thanks for the input, but the point is not to break existing users which
> your patch clearly does.
>
> Just to get this straight for me, you are using DW_APB_INTC as a _slave_
> interrupt controller of DW_APB_GPIO _master_ interrupt controller? Is
> this a fictional setup to test your IP or is it a real world example?
>
> IMHO, if the setup is real, i.e. an APB_INTC hooked up to a GPIO
> upstream-wise, you should think of a new driver for an externally
> connected but APB bus accessible (???) interrupt controller. If it
> is rather some extension of the GPIO controller you should amend
> dw_apb_gpio.c instead.
>
> Sorry, but I cannot really wrap my head around that specific setup...
>
> Sebastian
Hi Sebastian,
I think Alexey is away for rest of the week so let me fill in some of the details.
The setup is indeed real and part of ARC SDP (Software Development Platform) and
these patches are precursor to getting that merged upstream.
SDP has a split main board / cpu card design, where both cards have an intc of own
to mux the irqs from respective levels. MB has a DW APB intc which sends a single
uplink to DW GPIO intc on cpu card, which in turn hooks up to ARC core. In the
final design, the board guys decided that this GPIO intc will act as a pass thru
for the downstream IRQ, but we still need to clear the interrupt on it etc - hence
it needs to properly show up in the cascaded intc hierarchy.
Interestingly, what we have locally in our working setup (for about an year) is an
out-of-tree dw gpio intc driver, which Mischa (no longer at Synopsys) had put
together, and it seems be more or less a copy of ur dw apb intc (although the reg
offsets specified by APB_INT_* are aligned to GPIO IP) but rest of code all seems
to be exactly same.
Does that mean if we tweak irq-dw-apb-ictlc.c enough, it could double as driver
for intc component of dw-apb-gpio too ?
Thx for looking into this.
-Vineet
>
>>> Now when this driver is converted to a normal platform device it may use
>>> probe deferral and so all dependences between devices and their
>>> interrupt controllers are resolved automatically on boot.
>>>
>>> Signed-off-by: Alexey Brodkin <abrodkin@...opsys.com>
>>> Cc: Vineet Gupta <vgupta@...opsys.com>
>>> Cc: Thomas Gleixner <tglx@...utronix.de>
>>> Cc: Jason Cooper <jason@...edaemon.net>
>>> Cc: Jisheng Zhang <jszhang@...vell.com>
>>> ---
>>> drivers/irqchip/irq-dw-apb-ictl.c | 112
>>> +++++++++++++++++++++++--------------- 1 file changed, 67 insertions(+), 45
>>> deletions(-)
>>>
>>> diff --git a/drivers/irqchip/irq-dw-apb-ictl.c
>>> b/drivers/irqchip/irq-dw-apb-ictl.c index 53bb732..0b05c58 100644
>>> --- a/drivers/irqchip/irq-dw-apb-ictl.c
>>> +++ b/drivers/irqchip/irq-dw-apb-ictl.c
>>> @@ -11,13 +11,15 @@
>>> * warranty of any kind, whether express or implied.
>>> */
>>>
>>> -#include <linux/io.h>
>> this headfile need to be kept for readl_relaxed/writel_relaxed
>>
>>> -#include <linux/irq.h>
>>> #include <linux/irqchip/chained_irq.h>
>>> -#include <linux/of_address.h>
>>> #include <linux/of_irq.h>
>>> +#include <linux/of_platform.h>
>>> +#include <linux/module.h>
>> sort alphabetically
>>
>>> -#include "irqchip.h"
>>> +struct dw_apb_intl_priv {
>>> + struct device *dev;
>>> + struct irq_domain *irq_domain;
>>> +};
>>>
>>> #define APB_INT_ENABLE_L 0x00
>>> #define APB_INT_ENABLE_H 0x04
>>> @@ -65,41 +67,38 @@ static void dw_apb_ictl_resume(struct irq_data *d)
>>> #define dw_apb_ictl_resume NULL
>>> #endif /* CONFIG_PM */
>>>
>>> -static int __init dw_apb_ictl_init(struct device_node *np,
>>> - struct device_node *parent)
>>> +static int dw_apb_ictl_probe(struct platform_device *pdev)
>>> {
>>> unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
>>> - struct resource r;
>>> - struct irq_domain *domain;
>>> + struct device *dev = &pdev->dev;
>>> + struct device_node *np = dev->of_node;
>>> struct irq_chip_generic *gc;
>>> + struct dw_apb_intl_priv *p;
>>> + struct resource *res;
>>> void __iomem *iobase;
>>> int ret, nrirqs, irq;
>>> u32 reg;
>>>
>>> - /* Map the parent interrupt for the chained handler */
>>> - irq = irq_of_parse_and_map(np, 0);
>>> - if (irq <= 0) {
>>> - pr_err("%s: unable to parse irq\n", np->full_name);
>>> - return -EINVAL;
>>> - }
>>> + if (!np)
>>> + return -ENODEV;
>>>
>>> - ret = of_address_to_resource(np, 0, &r);
>>> - if (ret) {
>>> - pr_err("%s: unable to get resource\n", np->full_name);
>>> - return ret;
>>> + irq = platform_get_irq(pdev, 0);
>>> + if (irq < 0) {
>>> + if (irq != -EPROBE_DEFER)
>>> + dev_err(dev, "no irq resource %d\n", irq);
>>> + return irq;
>>> }
>>>
>>> - if (!request_mem_region(r.start, resource_size(&r),
>>> np->full_name)) {
>>> - pr_err("%s: unable to request mem region\n",
>>> np->full_name);
>>> + p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
>>> + if (!p)
>>> return -ENOMEM;
>>> - }
>>>
>>> - iobase = ioremap(r.start, resource_size(&r));
>>> - if (!iobase) {
>>> - pr_err("%s: unable to map resource\n", np->full_name);
>>> - ret = -ENOMEM;
>>> - goto err_release;
>>> - }
>>> + p->dev = &pdev->dev;
>>> +
>>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> + iobase = devm_ioremap_resource(&pdev->dev, res);
>>> + if (IS_ERR(iobase))
>>> + return PTR_ERR(iobase);
>>>
>>> /*
>>> * DW IP can be configured to allow 2-64 irqs. We can determine
>>> @@ -120,25 +119,27 @@ static int __init dw_apb_ictl_init(struct device_node
>>> *np, else
>>> nrirqs = fls(readl_relaxed(iobase + APB_INT_ENABLE_L));
>>>
>>> - domain = irq_domain_add_linear(np, nrirqs,
>>> - &irq_generic_chip_ops, NULL);
>>> - if (!domain) {
>>> + p->irq_domain = irq_domain_add_linear(np, nrirqs,
>>> + &irq_generic_chip_ops, NULL);
>>> + if (!p->irq_domain) {
>>> pr_err("%s: unable to add irq domain\n", np->full_name);
>>> - ret = -ENOMEM;
>>> - goto err_unmap;
>>> + return -ENOMEM;
>>> }
>>>
>>> - ret = irq_alloc_domain_generic_chips(domain, 32, (nrirqs > 32) ?
>>> 2 : 1,
>>> - np->name, handle_level_irq,
>>> clr, 0,
>>> + ret = irq_alloc_domain_generic_chips(p->irq_domain, 32,
>>> + (nrirqs > 32) ? 2 : 1,
>>> np->name,
>>> + handle_level_irq, clr, 0,
>>> IRQ_GC_MASK_CACHE_PER_TYPE |
>>> IRQ_GC_INIT_MASK_CACHE);
>>> if (ret) {
>>> - pr_err("%s: unable to alloc irq domain gc\n",
>>> np->full_name);
>>> - goto err_unmap;
>>> + dev_info(p->dev, "irq_alloc_domain_generic_chips
>>> failed\n");
>>> + irq_domain_remove(p->irq_domain);
>>> + p->irq_domain = NULL;
>>> + return -ENOMEM;
>>> }
>>>
>>> - gc = irq_get_domain_generic_chip(domain, 0);
>>> - gc->private = domain;
>>> + gc = irq_get_domain_generic_chip(p->irq_domain, 0);
>>> + gc->private = p->irq_domain;
>>> gc->reg_base = iobase;
>>>
>>> gc->chip_types[0].regs.mask = APB_INT_MASK_L;
>>> @@ -159,12 +160,33 @@ static int __init dw_apb_ictl_init(struct device_node
>>> *np, irq_set_chained_handler(irq, dw_apb_ictl_handler);
>>>
>>> return 0;
>>> +}
>>>
>>> -err_unmap:
>>> - iounmap(iobase);
>>> -err_release:
>>> - release_mem_region(r.start, resource_size(&r));
>>> - return ret;
>>> +static int dw_apb_ictl_remove(struct platform_device *pdev)
>>> +{
>>> + struct dw_apb_intl_priv *p = platform_get_drvdata(pdev);
>>> +
>>> + irq_domain_remove(p->irq_domain);
>>> + return 0;
>>> }
>>> -IRQCHIP_DECLARE(dw_apb_ictl,
>>> - "snps,dw-apb-ictl", dw_apb_ictl_init);
>> So, the ictl won't be initialized in init_IRQ(), it will cause problems.
>>
>>> +
>>> +static const struct of_device_id dw_apb_ictl_dt_ids[] = {
>>> + { .compatible = "snps,dw-apb-ictl", },
>>> + {},
>>> +};
>>> +MODULE_DEVICE_TABLE(of, dw_apb_ictl_dt_ids);
>>> +
>>> +static struct platform_driver dw_apb_ictl_device_driver = {
>>> + .probe = dw_apb_ictl_probe,
>>> + .remove = dw_apb_ictl_remove,
>>> + .driver = {
>>> + .name = "synopsys_dw_apb_irq",
>>> + .of_match_table = of_match_ptr(dw_apb_ictl_dt_ids),
>>> + }
>>> +};
>>> +
>>> +module_platform_driver(dw_apb_ictl_device_driver);
>> This is too late. If the ictl is needed during early boot, for example
>> on Marvell BG2Q DMP board, we still need to calibrate the delay loop, the
>> kernel will hang at "Calibrating delay loop..."
>>
>> Thanks,
>> Jisheng
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists