linux-kernel - Re: [PATCH v2 2/2] ARM: dts: am33xx: Move wkup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 5 Mar 2015 10:46:01 -0600
From:	Suman Anna <s-anna@...com>
To:	Tony Lindgren <tony@...mide.com>, Dave Gerlach <d-gerlach@...com>
CC:	<linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
	<devicetree@...r.kernel.org>, Ohad Ben-Cohen <ohad@...ery.com>,
	Kevin Hilman <khilman@...aro.org>, Felipe Balbi <balbi@...com>
Subject: Re: [PATCH v2 2/2] ARM: dts: am33xx: Move wkup_m3 node to soc node
 and add ranges

On 03/05/2015 09:40 AM, Tony Lindgren wrote:
> * Dave Gerlach <d-gerlach@...com> [150304 20:14]:
Dave,

Looks like the commit message disappeared during your patch preparation.

>> Signed-off-by: Suman Anna <s-anna@...com>
>> Signed-off-by: Dave Gerlach <d-gerlach@...com>
>> ---
>>  arch/arm/boot/dts/am33xx.dtsi | 21 +++++++++++++--------
>>  1 file changed, 13 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>> index acd3705..086415c 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -77,10 +77,23 @@
>>  	 */
>>  	soc {
>>  		compatible = "ti,omap-infra";
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0     0x44d00000 0x4000>,
>> +			 <0x80000 0x44d80000 0x2000>;
>> +
> 
> I think putting the ranges here will cause issues for adding
> ranges for anything else.
> 
> How about do something like this instead (untested):
> 
> ocp {
> 	l4_wkup: l4_wkup@...00000 {
> 		compatible = "am335-l4-wkup", "simple-bus";
> 		ranges = <0 0x44c00000 0x3fffff>;
> 
> 		wkup_m3: wkup_m3@...00000 {
> 			compatible = "ti,am3353-wkup-m3";
> 			reg = <0x1000000     0x4000>,	/* M3 UMEM */
> 			      <0x180000	     0x2000>;	/* M3 DMEM */
> 			ti,hwmods = "wkup_m3";
> 			ti,pm-firmware = "am335x-pm-firmware.elf";
> 		};
> 
> 		...
> 	};
> };
> 
> That way we can start moving also the other l4_wkup components there
> eventuallly without having to redo the ranges again for wkup_m3.
> 
> You can also look at how the scm_conf was done for dm816x.dtsi for an
> example, and the recent large set of patches posted by Tero.
> 
Tony,

Thanks, I will take a look at this. I initially tried adding to ocp node
directly, but obviously it had issues.

But in general, you are ok with the ranges approach right, rather than
having to define another property with virtual addresses. These devices
are not on a separate bus like PCI, so I placed them in the soc node,
and expect only special devices like processors to kinda go under that node.

regards
Suman



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/