linux-kernel - [PATCHv3 0/1] Intel Quark X1000 DTS thermal driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1425886977-31078-1-git-send-email-boon.leong.ong@intel.com>
Date:	Mon,  9 Mar 2015 15:42:56 +0800
From:	Ong Boon Leong <boon.leong.ong@...el.com>
To:	rui.zhang@...el.com, edubezval@...il.com,
	pure.logic@...us-software.ie, hock.leong.kweh@...el.com,
	andy.shevchenko@...il.com
Cc:	linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCHv3 0/1] Intel Quark X1000 DTS thermal driver

Dear maintainers & communities,

This patch introduces DTS thermal driver for Intel Quark X1000.
The code implementation is based on intel_soc_dts_thermal.c.

Intel Quark X1000 has one on-die DTS with two configurable trip points:
critical and hot trip points. However, todate, UEFI BIOS for Quark X1000
uses only critical trip point. UEFI BIOS always lock DTS register before
hand-over to Linux kernel.

The minimalist thermal design is meant to trigger Linux distro to gracefully
power-down the system when its DTS temperature exceeds the configured critical
trip point.

In anticipation that other variant of Quark platform may come with UEFI BIOS
that does not lock DTS register during hand-over, this DTS driver is built
with logics to handle such case too.

I have tested v1 of the patch on Intel Galileo Gen v2 board and found it
satisfactory with logs below:

  root@...rk:/sys/class/thermal/thermal_zone0# echo disabled > mode
  [   46.276881] intel_quark_dts_thermal: DTS is locked. Cannot disable DTS
  -sh: echo: write error: Operation not permitted
  root@...rk:/sys/class/thermal/thermal_zone0#
  root@...rk:/sys/class/thermal/thermal_zone0# cat temp
  53
  root@...rk:/sys/class/thermal/thermal_zone0# cat trip_point_0_temp
  105
  root@...rk:/sys/class/thermal/thermal_zone0# cat trip_point_0_type
  critical
  root@...rk:/sys/class/thermal/thermal_zone0# cat trip_point_1_temp
  20
  root@...rk:/sys/class/thermal/thermal_zone0# cat trip_point_1_type
  hot
  root@...rk:/sys/class/thermal/thermal_zone0# cat type
  quark_dts

  root@...rk:/sys/class/thermal/thermal_zone0# echo 105 > emul_temp
  [  179.372981] thermal thermal_zone0: critical temperature reached(0 C),shutting down
  root@...rk:/sys/class/thermal/thermal_zone0#
  [  OK  ] Stopped target Multi-User System.
           Stopping Telephony service...
           Stopping Lightning Fast Webserver With Light System Requirements...
           Stopping Target Communication Framework agent...
           Stopping Galileo Arduino Layer...
  [  OK  ] Stopped target Login Prompts.
           Stopping Getty on tty1...
           Stopping Serial Getty on ttyS1...
           Stopping Login Service...
           Stopping D-Bus System Message Bus...
           Starting Store Sound Card State...
  [  OK  ] Stopped Telephony service.
  [  OK  ] Stopped Galileo Arduino Layer.
  [  OK  ] Stopped Login Service.
  [  OK  ] Stopped D-Bus System Message Bus.
  [  OK  ] Stopped Target Communication Framework agent.
  [  OK  ] Stopped Lightning Fast Webserver With Light System Requirements.
  [  OK  ] Stopped WPA supplicant.
  [  OK  ] Stopped Getty on tty1.
  [  OK  ] Stopped Serial Getty on ttyS1.

Please kindly review the patch at your convenient time and provide me feedback
for improvement. Appreciate your time and effort.

Thank You
Ong Boon Leong
Intel Corp.

---
Changes in v3:
* Kconfig dependency changed to X86_INTEL_QUARK

Changes in v2:
* Fix several commit write-up grammar, choice of words.
* Ensure "int ret" in correct order
* Add comment to explain DTS register field read/write bit operation
* Change to Dual BSD/GPL license
* Add logic to ensure safe trip point threshold value being set

Ong Boon Leong (1):
  thermal: intel Quark SoC X1000 DTS thermal driver

 drivers/thermal/Kconfig                   |   10
 drivers/thermal/Makefile                  |    1
 drivers/thermal/intel_quark_dts_thermal.c |  434 +++++++++++++++++++++++++++++
 3 files changed, 445 insertions(+)
 create mode 100644 drivers/thermal/intel_quark_dts_thermal.c

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/