| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1425903665-19343-1-git-send-email-sebastian.hesselbarth@gmail.com>
Date: Mon, 9 Mar 2015 13:21:05 +0100
From: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
To: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Cc: Jason Cooper <jason@...edaemon.net>, Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...e-electrons.com>,
Gabriel Dobato <dobatog@...il.com>,
Wolfram Sang <wsa@...-dreams.de>,
Stephen Warren <swarren@...dotorg.org>,
linux-i2c@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 1/4] i2c: mux-pinctrl: Rework to honor disabled child nodes
I2C mux pinctrl driver currently determines the number of sub-busses by
counting available pinctrl-names. Unfortunately, this requires each
incarnation of the devicetree node with different available sub-busses
to be rewritten.
This patch reworks i2c-mux-pinctrl driver to count the number of
available sub-nodes instead. The rework should be compatible to the old
way of probing for sub-busses and additionally allows to disable unused
sub-busses with standard DT property status = "disabled".
This also amends the corresponding devicetree binding documentation to
reflect the new functionality to disable unused sub-nodes. While at it,
also fix two references to binding documentation files that miss an "i2c-"
prefix.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Tested-by: Stephen Warren <swarren@...dia.com>
---
Changelog:
v2->v3:
- remove mention of "I2C bus numbers" (Suggested by Stephen Warren)
- require pinctrl-names property for "each child" instead of
"each enabled child" (Suggested by Stephen Warren)
- swap enabled/disabled child nodes (Suggested by Stephen Warren)
v1->v2:
- added a Tested-by for i2c-mux-pinctrl changes from Stepen Warren.
- reworded i2c-mux-pinctrl devicetree doc changes
(Suggested by Stephen Warren).
Patches 2/4 - 4/4 remain unchanged.
Cc: Jason Cooper <jason@...edaemon.net>
Cc: Andrew Lunn <andrew@...n.ch>
Cc: Gregory Clement <gregory.clement@...e-electrons.com>
Cc: Gabriel Dobato <dobatog@...il.com>
Cc: Wolfram Sang <wsa@...-dreams.de>
Cc: Stephen Warren <swarren@...dotorg.org>
Cc: linux-i2c@...r.kernel.org
Cc: devicetree@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
---
.../devicetree/bindings/i2c/i2c-mux-pinctrl.txt | 21 ++++---
drivers/i2c/muxes/i2c-mux-pinctrl.c | 70 ++++++++++++++--------
2 files changed, 58 insertions(+), 33 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
index ae8af1694e95..cd94a0f64d76 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
@@ -28,17 +28,18 @@ Also required are:
* Standard pinctrl properties that specify the pin mux state for each child
bus. See ../pinctrl/pinctrl-bindings.txt.
-* Standard I2C mux properties. See mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
-* I2C child bus nodes. See mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
-For each named state defined in the pinctrl-names property, an I2C child bus
-will be created. I2C child bus numbers are assigned based on the index into
-the pinctrl-names property.
+For each enabled child node an I2C child bus will be created.
-The only exception is that no bus will be created for a state named "idle". If
-such a state is defined, it must be the last entry in pinctrl-names. For
-example:
+There must be a corresponding pinctrl-names entry for each child node at the
+position of the child node's "reg" property.
+
+Also, there can be an idle pinctrl state defined at the end of possible pinctrl
+states. If such a state is defined, it must be the last entry in pinctrl-names.
+For example:
pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1
pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)
@@ -68,10 +69,12 @@ Example:
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
+ /* Disabled child bus 0 */
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
eeprom {
compatible = "eeprom";
@@ -79,10 +82,12 @@ Example:
};
};
+ /* Enabled child bus 1 */
i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "okay";
eeprom {
compatible = "eeprom";
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
index b48378c4b40d..033dacfabfdf 100644
--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -56,9 +56,12 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- int num_names, i, ret;
+ struct device_node *child;
+ struct property *prop;
+ int num_names, num_children, ret;
struct device_node *adapter_np;
struct i2c_adapter *adapter;
+ const char *state;
if (!np)
return 0;
@@ -77,32 +80,16 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
return num_names;
}
- mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
- sizeof(*mux->pdata->pinctrl_states) * num_names,
- GFP_KERNEL);
- if (!mux->pdata->pinctrl_states) {
- dev_err(mux->dev, "Cannot allocate pinctrl_states\n");
- return -ENOMEM;
+ num_children = of_get_available_child_count(np);
+ if (num_children < 0) {
+ dev_err(mux->dev, "Unable to count available children: %d\n",
+ num_children);
+ return num_children;
}
- for (i = 0; i < num_names; i++) {
- ret = of_property_read_string_index(np, "pinctrl-names", i,
- &mux->pdata->pinctrl_states[mux->pdata->bus_count]);
- if (ret < 0) {
- dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
- ret);
- return ret;
- }
- if (!strcmp(mux->pdata->pinctrl_states[mux->pdata->bus_count],
- "idle")) {
- if (i != num_names - 1) {
- dev_err(mux->dev, "idle state must be last\n");
- return -EINVAL;
- }
- mux->pdata->pinctrl_state_idle = "idle";
- } else {
- mux->pdata->bus_count++;
- }
+ if (num_names < num_children) {
+ dev_err(mux->dev, "Found less pinctrl states than children\n");
+ return -EINVAL;
}
adapter_np = of_parse_phandle(np, "i2c-parent", 0);
@@ -118,6 +105,39 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
mux->pdata->parent_bus_num = i2c_adapter_id(adapter);
put_device(&adapter->dev);
+ mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
+ sizeof(*mux->pdata->pinctrl_states) * num_children,
+ GFP_KERNEL);
+ if (!mux->pdata->pinctrl_states) {
+ dev_err(mux->dev, "Cannot allocate pinctrl_states\n");
+ return -ENOMEM;
+ }
+
+ of_property_for_each_string(np, "pinctrl-names", prop, state)
+ if (!strcmp(state, "idle"))
+ mux->pdata->pinctrl_state_idle = "idle";
+
+ for_each_available_child_of_node(np, child) {
+ u32 reg;
+
+ ret = of_property_read_u32(child, "reg", ®);
+ if (ret < 0) {
+ dev_err(mux->dev, "Missing reg property for child node: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = of_property_read_string_index(np,
+ "pinctrl-names", reg, &state);
+ if (ret < 0) {
+ dev_err(mux->dev, "Cannot parse pinctrl-names for mux %d: %d\n",
+ reg, ret);
+ return ret;
+ }
+
+ mux->pdata->pinctrl_states[mux->pdata->bus_count++] = state;
+ }
+
return 0;
}
#else
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists