| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1426000735-14375-5-git-send-email-suzuki.poulose@arm.com>
Date: Tue, 10 Mar 2015 15:18:54 +0000
From: "Suzuki K. Poulose" <suzuki.poulose@....com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Nicolas Pitre <nico@...aro.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Kukjin Kim <kgene@...nel.org>,
Abhilash Kesavan <a.kesavan@...sung.com>,
Arnd Bergmann <arnd@...db.de>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Liviu Dudau <liviu.dudau@....com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Olof Johansson <olof@...om.net>,
Pawel Moll <pawel.moll@....com>,
Punit Agrawal <punit.agrawal@....com>,
Sudeep Holla <sudeep.holla@....com>,
Will Deacon <will.deacon@....com>,
Catalin Marinas <catalin.marinas@....com>,
"Suzuki K. Poulose" <suzuki.poulose@....com>,
Nicolas Pitre <nicolas.pitre@...aro.org>
Subject: [PATCH 4/5] arm-cci: Split the code for PMU vs driver support
From: "Suzuki K. Poulose" <suzuki.poulose@....com>
This patch separates the PMU driver code from the low level
CCI driver code and enables the PMU driver for ARM64.
Introduces config options for both.
ARM_CCI400_PORT_CTRL - controls the low level driver code for
CCI400 ports.
ARM_CCI400_PMU - controls the PMU driver code
ARM_CCI400_COMMON - Common defintions for CCI400
This patch also changes:
ARM_CCI - common code for probing the CCI devices. This can be
used for adding support for newer CCI versions(e.g, CCI-500).
Changes since V2:
- Make ARM_CCI400_PMU default y (Suggested-by: Sudeep Holla)
Changes since V1 (Suggestions-by: Nicolas Pitre):
- Renames
CONFIG_ARM_CCI400_MCPM => CONFIG_ARM_CCI400_PORT_CTRL
CCI400_MCPM_PORTS_DATA => CCI400_PORTS_DATA
- Select ARM_CCI400_COMMON for ARM_CCI400_PORT_CTRL
- Better documentation in the git commit log about the ARM_CCI config.
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Cc: Kukjin Kim <kgene@...nel.org>
Cc: Abhilash Kesavan <a.kesavan@...sung.com>
Cc: Liviu Dudau <liviu.dudau@....com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Cc: Sudeep Holla <sudeep.holla@....com>
Cc: Nicolas Pitre <nicolas.pitre@...aro.org>
Cc: Punit Agrawal <punit.agrawal@....com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@....com>
---
arch/arm/mach-exynos/Kconfig | 2 +-
arch/arm/mach-vexpress/Kconfig | 4 ++--
drivers/bus/Kconfig | 28 ++++++++++++++++++++++++----
drivers/bus/arm-cci.c | 24 ++++++++++++++++++++----
include/linux/arm-cci.h | 7 ++++++-
5 files changed, 53 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 603820e..81064cd 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -123,7 +123,7 @@ config SOC_EXYNOS5800
config EXYNOS5420_MCPM
bool "Exynos5420 Multi-Cluster PM support"
depends on MCPM && SOC_EXYNOS5420
- select ARM_CCI
+ select ARM_CCI400_PORT_CTRL
select ARM_CPU_SUSPEND
help
This is needed to provide CPU and cluster power management
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 3c2509b..daa7ab6 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -53,7 +53,7 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
config ARCH_VEXPRESS_DCSCB
bool "Dual Cluster System Control Block (DCSCB) support"
depends on MCPM
- select ARM_CCI
+ select ARM_CCI400_PORT_CTRL
help
Support for the Dual Cluster System Configuration Block (DCSCB).
This is needed to provide CPU and cluster power management
@@ -71,7 +71,7 @@ config ARCH_VEXPRESS_SPC
config ARCH_VEXPRESS_TC2_PM
bool "Versatile Express TC2 power management"
depends on MCPM
- select ARM_CCI
+ select ARM_CCI400_PORT_CTRL
select ARCH_VEXPRESS_SPC
select ARM_CPU_SUSPEND
help
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index b99729e..79e297b 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -43,12 +43,32 @@ config OMAP_INTERCONNECT
help
Driver to enable OMAP interconnect error handling driver.
-config ARM_CCI
- bool "ARM CCI driver support"
+config ARM_CCI400_PORT_CTRL
+ bool
depends on ARM && OF && CPU_V7
+ select ARM_CCI400_COMMON
+ help
+ Low level power management driver for CCI400 cache coherent
+ interconnect for ARM platforms.
+
+config ARM_CCI400_PMU
+ bool "ARM CCI400 PMU support"
+ default y
+ depends on ARM || ARM64
+ depends on HW_PERF_EVENTS
+ select ARM_CCI400_COMMON
help
- Driver supporting the CCI cache coherent interconnect for ARM
- platforms.
+ Support for PMU events monitoring on the ARM CCI cache coherent
+ interconnect.
+
+ If unsure, say Y
+
+config ARM_CCI400_COMMON
+ bool
+ select ARM_CCI
+
+config ARM_CCI
+ bool
config ARM_CCN
bool "ARM CCN driver support"
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index 70dff09..581190d 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -32,6 +32,7 @@
static void __iomem *cci_ctrl_base;
static unsigned long cci_ctrl_phys;
+#ifdef CONFIG_ARM_CCI400_PORT_CTRL
struct cci_nb_ports {
unsigned int nb_ace;
unsigned int nb_ace_lite;
@@ -42,12 +43,19 @@ static const struct cci_nb_ports cci400_ports = {
.nb_ace_lite = 3
};
+#define CCI400_PORTS_DATA (&cci400_ports)
+#else
+#define CCI400_PORTS_DATA (NULL)
+#endif
+
static const struct of_device_id arm_cci_matches[] = {
- {.compatible = "arm,cci-400", .data = &cci400_ports },
+#ifdef CONFIG_ARM_CCI400_COMMON
+ {.compatible = "arm,cci-400", .data = CCI400_PORTS_DATA },
+#endif
{},
};
-#ifdef CONFIG_HW_PERF_EVENTS
+#ifdef CONFIG_ARM_CCI400_PMU
#define DRIVER_NAME "CCI-400"
#define DRIVER_NAME_PMU DRIVER_NAME " PMU"
@@ -1013,14 +1021,16 @@ static int __init cci_platform_init(void)
return platform_driver_register(&cci_platform_driver);
}
-#else /* !CONFIG_HW_PERF_EVENTS */
+#else /* !CONFIG_ARM_CCI400_PMU */
static int __init cci_platform_init(void)
{
return 0;
}
-#endif /* CONFIG_HW_PERF_EVENTS */
+#endif /* CONFIG_ARM_CCI400_PMU */
+
+#ifdef CONFIG_ARM_CCI400_PORT_CTRL
#define CCI_PORT_CTRL 0x0
#define CCI_CTRL_STATUS 0xc
@@ -1451,6 +1461,12 @@ static int cci_probe_ports(struct device_node *np)
return 0;
}
+#else /* !CONFIG_ARM_CCI400_PORT_CTRL */
+static inline int cci_probe_ports(struct device_node *np)
+{
+ return 0;
+}
+#endif /* CONFIG_ARM_CCI400_PORT_CTRL */
static int cci_probe(void)
{
diff --git a/include/linux/arm-cci.h b/include/linux/arm-cci.h
index aede5c7..521ec1f 100644
--- a/include/linux/arm-cci.h
+++ b/include/linux/arm-cci.h
@@ -30,12 +30,16 @@ struct device_node;
#ifdef CONFIG_ARM_CCI
extern bool cci_probed(void);
+#else
+static inline bool cci_probed(void) { return false; }
+#endif
+
+#ifdef CONFIG_ARM_CCI400_PORT_CTRL
extern int cci_ace_get_port(struct device_node *dn);
extern int cci_disable_port_by_cpu(u64 mpidr);
extern int __cci_control_port_by_device(struct device_node *dn, bool enable);
extern int __cci_control_port_by_index(u32 port, bool enable);
#else
-static inline bool cci_probed(void) { return false; }
static inline int cci_ace_get_port(struct device_node *dn)
{
return -ENODEV;
@@ -51,6 +55,7 @@ static inline int __cci_control_port_by_index(u32 port, bool enable)
return -ENODEV;
}
#endif
+
#define cci_disable_port_by_device(dev) \
__cci_control_port_by_device(dev, false)
#define cci_enable_port_by_device(dev) \
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists