| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1426077587-1561-16-git-send-email-hanjun.guo@linaro.org>
Date: Wed, 11 Mar 2015 20:39:41 +0800
From: Hanjun Guo <hanjun.guo@...aro.org>
To: Catalin Marinas <catalin.marinas@....com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Will Deacon <will.deacon@....com>,
Olof Johansson <olof@...om.net>,
Grant Likely <grant.likely@...aro.org>
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@....com>,
Arnd Bergmann <arnd@...db.de>,
Mark Rutland <mark.rutland@....com>,
Graeme Gregory <graeme.gregory@...aro.org>,
Sudeep Holla <Sudeep.Holla@....com>,
Jon Masters <jcm@...hat.com>,
Marc Zyngier <marc.zyngier@....com>,
Mark Brown <broonie@...nel.org>,
Robert Richter <rric@...nel.org>,
Timur Tabi <timur@...eaurora.org>,
Ashwin Chaugule <ashwinc@...eaurora.org>,
suravee.suthikulpanit@....com, linux-acpi@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linaro-acpi@...ts.linaro.org, Hanjun Guo <hanjun.guo@...aro.org>
Subject: [PATCH v10 15/21] ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi
Introduce ACPI_IRQ_MODEL_GIC which is needed for ARM64 as GIC is
used, and then register device's gsi with the core IRQ subsystem.
acpi_register_gsi() is similar to DT based irq_of_parse_and_map(),
since gsi is unique in the system, so use hwirq number directly
for the mapping.
We are going to implement stacked domains when GICv2m, GICv3, ITS
support are added.
CC: Marc Zyngier <marc.zyngier@....com>
Originally-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@....com>
Tested-by: Yijing Wang <wangyijing@...wei.com>
Tested-by: Mark Langsdorf <mlangsdo@...hat.com>
Tested-by: Jon Masters <jcm@...hat.com>
Tested-by: Timur Tabi <timur@...eaurora.org>
Tested-by: Robert Richter <rrichter@...ium.com>
Acked-by: Robert Richter <rrichter@...ium.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Reviewed-by: Grant Likely <grant.likely@...aro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@...aro.org>
---
arch/arm64/kernel/acpi.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++
drivers/acpi/bus.c | 3 ++
include/linux/acpi.h | 1 +
3 files changed, 77 insertions(+)
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index c9203c0..dec6f8a 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -76,6 +76,12 @@ static int __init dt_scan_depth1_nodes(unsigned long node,
}
/*
+ * Since we're on ARM, the default interrupt routing model
+ * clearly has to be GIC.
+ */
+enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_GIC;
+
+/*
* __acpi_map_table() will be called before page_init(), so early_ioremap()
* or early_memremap() should be called here to for ACPI table mapping.
*/
@@ -218,6 +224,73 @@ void __init acpi_init_cpus(void)
pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus);
}
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
+{
+ *irq = irq_find_mapping(NULL, gsi);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
+
+/*
+ * success: return IRQ number (>0)
+ * failure: return =< 0
+ */
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+ unsigned int irq;
+ unsigned int irq_type;
+
+ /*
+ * ACPI have no bindings to indicate SPI or PPI, so we
+ * use different mappings from DT in ACPI.
+ *
+ * For FDT
+ * PPI interrupt: in the range [0, 15];
+ * SPI interrupt: in the range [0, 987];
+ *
+ * For ACPI, GSI should be unique so using
+ * the hwirq directly for the mapping:
+ * PPI interrupt: in the range [16, 31];
+ * SPI interrupt: in the range [32, 1019];
+ */
+
+ if (trigger == ACPI_EDGE_SENSITIVE &&
+ polarity == ACPI_ACTIVE_LOW)
+ irq_type = IRQ_TYPE_EDGE_FALLING;
+ else if (trigger == ACPI_EDGE_SENSITIVE &&
+ polarity == ACPI_ACTIVE_HIGH)
+ irq_type = IRQ_TYPE_EDGE_RISING;
+ else if (trigger == ACPI_LEVEL_SENSITIVE &&
+ polarity == ACPI_ACTIVE_LOW)
+ irq_type = IRQ_TYPE_LEVEL_LOW;
+ else if (trigger == ACPI_LEVEL_SENSITIVE &&
+ polarity == ACPI_ACTIVE_HIGH)
+ irq_type = IRQ_TYPE_LEVEL_HIGH;
+ else
+ irq_type = IRQ_TYPE_NONE;
+
+ /*
+ * Since only one GIC is supported in ACPI 5.0, we can
+ * create mapping refer to the default domain
+ */
+ irq = irq_create_mapping(NULL, gsi);
+ if (!irq)
+ return irq;
+
+ /* Set irq type if specified and different than the current one */
+ if (irq_type != IRQ_TYPE_NONE &&
+ irq_type != irq_get_trigger_type(irq))
+ irq_set_irq_type(irq, irq_type);
+ return irq;
+}
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
+
+void acpi_unregister_gsi(u32 gsi)
+{
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
+
static int __init acpi_parse_fadt(struct acpi_table_header *table)
{
struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table;
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 8b67bd0..c412fdb 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -448,6 +448,9 @@ static int __init acpi_bus_init_irq(void)
case ACPI_IRQ_MODEL_IOSAPIC:
message = "IOSAPIC";
break;
+ case ACPI_IRQ_MODEL_GIC:
+ message = "GIC";
+ break;
case ACPI_IRQ_MODEL_PLATFORM:
message = "platform specific model";
break;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 6ec33c5..de4e86f 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -73,6 +73,7 @@ enum acpi_irq_model_id {
ACPI_IRQ_MODEL_IOAPIC,
ACPI_IRQ_MODEL_IOSAPIC,
ACPI_IRQ_MODEL_PLATFORM,
+ ACPI_IRQ_MODEL_GIC,
ACPI_IRQ_MODEL_COUNT
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists