| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <5500566502000078000688D7@mail.emea.novell.com>
Date: Wed, 11 Mar 2015 13:51:17 +0000
From: "Jan Beulich" <JBeulich@...e.com>
To: "David Vrabel" <david.vrabel@...rix.com>,
"Boris Ostrovsky" <boris.ostrovsky@...cle.com>,
"Konrad Rzeszutek Wilk" <konrad.wilk@...cle.com>
Cc: "xen-devel" <xen-devel@...ts.xenproject.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 1/2] xen-pciback: limit guest control of command
register
Otherwise the guest can abuse that control to cause e.g. PCIe
Unsupported Request responses (by disabling memory and/or I/O decoding
and subsequently causing [CPU side] accesses to the respective address
ranges), which (depending on system configuration) may be fatal to the
host.
Note that to alter any of the bits collected together as
PCI_COMMAND_GUEST permissive mode is now required to be enabled
globally or on the specific device.
This is CVE-2015-2150 / XSA-120.
Signed-off-by: Jan Beulich <jbeulich@...e.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
---
drivers/xen/xen-pciback/conf_space.c | 2
drivers/xen/xen-pciback/conf_space.h | 2
drivers/xen/xen-pciback/conf_space_header.c | 58 ++++++++++++++++++++++------
3 files changed, 49 insertions(+), 13 deletions(-)
--- 4.0-rc3-xen-pciback.orig/drivers/xen/xen-pciback/conf_space.c
+++ 4.0-rc3-xen-pciback/drivers/xen/xen-pciback/conf_space.c
@@ -16,7 +16,7 @@
#include "conf_space.h"
#include "conf_space_quirks.h"
-static bool permissive;
+bool permissive;
module_param(permissive, bool, 0644);
/* This is where xen_pcibk_read_config_byte, xen_pcibk_read_config_word,
--- 4.0-rc3-xen-pciback.orig/drivers/xen/xen-pciback/conf_space.h
+++ 4.0-rc3-xen-pciback/drivers/xen/xen-pciback/conf_space.h
@@ -64,6 +64,8 @@ struct config_field_entry {
void *data;
};
+extern bool permissive;
+
#define OFFSET(cfg_entry) ((cfg_entry)->base_offset+(cfg_entry)->field->offset)
/* Add fields to a device - the add_fields macro expects to get a pointer to
--- 4.0-rc3-xen-pciback.orig/drivers/xen/xen-pciback/conf_space_header.c
+++ 4.0-rc3-xen-pciback/drivers/xen/xen-pciback/conf_space_header.c
@@ -11,6 +11,10 @@
#include "pciback.h"
#include "conf_space.h"
+struct pci_cmd_info {
+ u16 val;
+};
+
struct pci_bar_info {
u32 val;
u32 len_val;
@@ -20,22 +24,36 @@ struct pci_bar_info {
#define is_enable_cmd(value) ((value)&(PCI_COMMAND_MEMORY|PCI_COMMAND_IO))
#define is_master_cmd(value) ((value)&PCI_COMMAND_MASTER)
-static int command_read(struct pci_dev *dev, int offset, u16 *value, void *data)
+/* Bits guests are allowed to control in permissive mode. */
+#define PCI_COMMAND_GUEST (PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL| \
+ PCI_COMMAND_INVALIDATE|PCI_COMMAND_VGA_PALETTE| \
+ PCI_COMMAND_WAIT|PCI_COMMAND_FAST_BACK)
+
+static void *command_init(struct pci_dev *dev, int offset)
{
- int i;
- int ret;
+ struct pci_cmd_info *cmd = kmalloc(sizeof(*cmd), GFP_KERNEL);
+ int err;
+
+ if (!cmd)
+ return ERR_PTR(-ENOMEM);
- ret = xen_pcibk_read_config_word(dev, offset, value, data);
- if (!pci_is_enabled(dev))
- return ret;
-
- for (i = 0; i < PCI_ROM_RESOURCE; i++) {
- if (dev->resource[i].flags & IORESOURCE_IO)
- *value |= PCI_COMMAND_IO;
- if (dev->resource[i].flags & IORESOURCE_MEM)
- *value |= PCI_COMMAND_MEMORY;
+ err = pci_read_config_word(dev, PCI_COMMAND, &cmd->val);
+ if (err) {
+ kfree(cmd);
+ return ERR_PTR(err);
}
+ return cmd;
+}
+
+static int command_read(struct pci_dev *dev, int offset, u16 *value, void *data)
+{
+ int ret = pci_read_config_word(dev, offset, value);
+ const struct pci_cmd_info *cmd = data;
+
+ *value &= PCI_COMMAND_GUEST;
+ *value |= cmd->val & ~PCI_COMMAND_GUEST;
+
return ret;
}
@@ -43,6 +61,8 @@ static int command_write(struct pci_dev
{
struct xen_pcibk_dev_data *dev_data;
int err;
+ u16 val;
+ struct pci_cmd_info *cmd = data;
dev_data = pci_get_drvdata(dev);
if (!pci_is_enabled(dev) && is_enable_cmd(value)) {
@@ -83,6 +103,19 @@ static int command_write(struct pci_dev
}
}
+ cmd->val = value;
+
+ if (!permissive && (!dev_data || !dev_data->permissive))
+ return 0;
+
+ /* Only allow the guest to control certain bits. */
+ err = pci_read_config_word(dev, offset, &val);
+ if (err || val == value)
+ return err;
+
+ value &= PCI_COMMAND_GUEST;
+ value |= val & ~PCI_COMMAND_GUEST;
+
return pci_write_config_word(dev, offset, value);
}
@@ -282,6 +315,8 @@ static const struct config_field header_
{
.offset = PCI_COMMAND,
.size = 2,
+ .init = command_init,
+ .release = bar_release,
.u.w.read = command_read,
.u.w.write = command_write,
},
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists