| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1426172071-20743-5-git-send-email-alexandre.belloni@free-electrons.com>
Date: Thu, 12 Mar 2015 15:54:26 +0100
From: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Alexander Stein <alexander.stein@...tec-electronic.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCH v4 4/9] ARM: at91/dt: introduce atmel,<chip>-dbgu
The DBGU is not a simple UART and we need to be able to distinguish it from the
other UARTs, in particular to get its address and check the chip id.
Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
---
Documentation/devicetree/bindings/serial/atmel-usart.txt | 3 ++-
arch/arm/boot/dts/at91rm9200.dtsi | 2 +-
arch/arm/boot/dts/at91sam9260.dtsi | 2 +-
arch/arm/boot/dts/at91sam9261.dtsi | 2 +-
arch/arm/boot/dts/at91sam9263.dtsi | 2 +-
arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
arch/arm/boot/dts/at91sam9n12.dtsi | 2 +-
arch/arm/boot/dts/at91sam9rl.dtsi | 2 +-
arch/arm/boot/dts/at91sam9x5.dtsi | 2 +-
arch/arm/boot/dts/sama5d3.dtsi | 2 +-
arch/arm/boot/dts/sama5d4.dtsi | 2 +-
11 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index a6391e70a8fd..90787aa2e648 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -1,9 +1,10 @@
* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
Required properties:
-- compatible: Should be "atmel,<chip>-usart"
+- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
The compatible <chip> indicated will be the first SoC to support an
additional mode or an USART new feature.
+ For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt
- clock-names: tuple listing input clock names.
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 21c2b504f977..c515e4b160be 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -830,7 +830,7 @@
};
dbgu: serial@...ff200 {
- compatible = "atmel,at91rm9200-usart";
+ compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index fff0ee69aab4..9ea347eff3a7 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -753,7 +753,7 @@
};
dbgu: serial@...ff200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index e247b0b5fdab..45973554f229 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -275,7 +275,7 @@
};
dbgu: serial@...ff200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 1f67bb4c144e..111a4e029cca 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -762,7 +762,7 @@
};
dbgu: serial@...fee00 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index ee80aa9c0759..d5ec0fb935fb 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -893,7 +893,7 @@
};
dbgu: serial@...fee00 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index c2666a7cb5b1..00934c005ff9 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -757,7 +757,7 @@
};
dbgu: serial@...ff200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 40f645b8fe25..ebfd5ce9cb38 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -377,7 +377,7 @@
};
dbgu: serial@...ff200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 818dabdd8c0e..ce1494622205 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -860,7 +860,7 @@
};
dbgu: serial@...ff200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 261311bdf65b..8e850d1bc588 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -439,7 +439,7 @@
};
dbgu: serial@...fee00 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index d986b41b9654..d3627c4a58e0 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1063,7 +1063,7 @@
};
dbgu: serial@...69000 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfc069000 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists