[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <86E29CFB-0345-400E-8085-CC2DA549B79A@goldelico.com>
Date: Tue, 17 Mar 2015 09:59:34 +0100
From: "Dr. H. Nikolaus Schaller" <hns@...delico.com>
To: Pavel Machek <pavel@....cz>
Cc: Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Mark Rutland <mark.rutland@....com>,
Tony Lindgren <tony@...mide.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Linux PM mailing list <linux-pm@...r.kernel.org>,
GTA04 owners <gta04-owner@...delico.com>,
Belisko Marek <marek.belisko@...il.com>
Subject: Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
Am 17.03.2015 um 09:48 schrieb Pavel Machek <pavel@....cz>:
>>
>> Temperature calibration should have already been done in the underlaying twl4030 iio driver.
>>
>> Discharge rate is the real current flow reported in uA. Also
>> reported by iio.
>
> Ack, but there's rather severe temperature dependency of the lithium
> battery, which you should take into account if you want to compute
> “percentage charged".
We just want to estimate it as good as possible. 5-10% is sufficient
and better than no value at all (which is what you get without this
driver).
And, we just convert the (existing) driver from non-DT to DT and to use
iio, so we do not want to change the inner logic what it does and how it
works.
BR,
Nikolaus
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists