| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1426663706-23979-2-git-send-email-yinghai@kernel.org>
Date: Wed, 18 Mar 2015 00:28:08 -0700
From: Yinghai Lu <yinghai@...nel.org>
To: Matt Fleming <matt.fleming@...el.com>,
"H. Peter Anvin" <hpa@...or.com>, Ingo Molnar <mingo@...hat.com>,
Jiri Kosina <jkosina@...e.cz>,
Kees Cook <keescook@...omium.org>,
Borislav Petkov <bp@...e.de>, Baoquan He <bhe@...hat.com>
Cc: Thomas Gleixner <tglx@...utronix.de>, linux-kernel@...r.kernel.org,
linux-efi@...r.kernel.org, Yinghai Lu <yinghai@...nel.org>,
Ying Huang <ying.huang@...el.com>
Subject: [PATCH v5 01/19] x86, boot: Make data from decompress_kernel stage live longer
Ying Huang found commit f47233c2d34f ("x86/mm/ASLR: Propagate base load address
calculation") causes warning from ioremap.
[ 0.499891] ------------[ cut here ]------------
[ 0.500021] WARNING: CPU: 0 PID: 1 at arch/x86/mm/ioremap.c:63 __ioremap_check_ram+0x445/0x4a0()
[ 0.501015] ioremap on RAM pfn 0x3416
[ 0.502013] Modules linked in:
[ 0.503017] CPU: 0 PID: 1 Comm: swapper Not tainted 3.19.0-04793-g2c303f7 #3
[ 0.504013] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.505014] 0000000000000009 ffff880012d8bb88 ffffffff81cedc16 ffff880012d8bbc8
[ 0.507424] ffffffff810dd1a0 0000000000000000 0000000000000001 0000000000000001
[ 0.509420] 0000000000003416 0000000000000001 0000000000000001 ffff880012d8bc28
[ 0.511415] Call Trace:
[ 0.512028] [<ffffffff81cedc16>] dump_stack+0x2e/0x3e
[ 0.513023] [<ffffffff810dd1a0>] warn_slowpath_common+0xe0/0x160
[ 0.514021] [<ffffffff810dd316>] warn_slowpath_fmt+0x56/0x60
[ 0.515022] [<ffffffff8107f4a5>] __ioremap_check_ram+0x445/0x4a0
[ 0.516022] [<ffffffff8107f060>] ? trace_do_page_fault+0x9b0/0x9b0
[ 0.517020] [<ffffffff810ec948>] walk_system_ram_range+0x128/0x140
[ 0.518022] [<ffffffff82d9081f>] ? create_setup_data_nodes+0xd1/0x488
[ 0.519019] [<ffffffff82d9081f>] ? create_setup_data_nodes+0xd1/0x488
[ 0.520021] [<ffffffff8107f882>] __ioremap_caller+0x172/0x850
[ 0.521021] [<ffffffff81080064>] ioremap_cache+0x24/0x30
[ 0.522019] [<ffffffff82d9081f>] create_setup_data_nodes+0xd1/0x488
[ 0.523023] [<ffffffff81493c9c>] ? internal_create_group+0x4ac/0x830
[ 0.524020] [<ffffffff82d90c76>] boot_params_ksysfs_init+0xa0/0xf9
[ 0.525020] [<ffffffff810005f1>] do_one_initcall+0x371/0x4c0
[ 0.526019] [<ffffffff82d90bd6>] ? create_setup_data_nodes+0x488/0x488
[ 0.527024] [<ffffffff82d8afd5>] kernel_init_freeable+0x368/0x4ba
[ 0.528022] [<ffffffff81ce15d0>] ? rest_init+0x260/0x260
[ 0.529020] [<ffffffff81ce15e6>] kernel_init+0x16/0x240
[ 0.530023] [<ffffffff81d0253a>] ret_from_fork+0x7a/0xb0
[ 0.531021] [<ffffffff81ce15d0>] ? rest_init+0x260/0x260
[ 0.532033] ---[ end trace b6a2b7ddc92922e5 ]---
Boris later found setup_data for kaslr from boot stage become all 0's in
kernel stage.
Current there is overlapping between data section for decompress code and final
kernel running code bss/brk area. We need to avoid overlapping to make data
live longer till kernel access them.
Current code is using extract_offset to control copied kernel position, it
will put the copied kernel in the middle of buffer when kernel run size is
bigger than decompressed needed buffer size. That cause the overlapping.
Detail flow in current code:
Bootloader allocate buffer according to init_size in hdr, and load the
ZO (arch/x86/boot/compressed/vmlinux) from start of that buffer.
During running of ZO, ZO move itself to the middle of buffer at
z_extract_offset to make sure that decompressor would not have output
overwrite input data before input data get consumed.
After decompressor is done, VO use most part buffer from start.
and ZO code and data section will overlap with VO bss section.
And later VO/clear_bss() clear them before code in arch/x86/kernel/setup.c
try to access them.
Current layout:
when init_size is the same as kernel run_size:
run_size
0 extract_offset init_size
|------------------|------------------------|
VO text/data VO bss/brk
input ZO text ZO data
This patch try to:
At first, move ZO to the end of buffer instead of middle of the buffer.
When init_size is bigger than kernel run size, will have
0 run_size init_size
|--------------------------------|----------|
VO text/data VO bss/brk
input ZO text ZO data
We already have init_size the buffer size, we can find the end easily
when copying ZO before decompressing.
Secondly, add extra size (ZO data size) to init_size. That is for
even old init_size is same as kernel run size, we will have
run_size
0 old init_size init_size
|------------------------------------------|--------|
VO text/data VO bss/brk
input ZO text ZO data
Here the size changes when old init_size is same as kernel run_size.
# size arch/x86/boot/compressed/vmlinux
text data bss dec hex filename
13247288 264 49248 13296800 cae4a0 arch/x86/boot/compressed/vmlinux
# bootloader reported init_size
kernel: [13cc00000, 13ff8efff]
After patch:
#size arch/x86/boot/compressed/vmlinux
text data bss dec hex filename
13247289 264 49248 13296801 cae4a1 arch/x86/boot/compressed/vmlinux
# bootloader reported init_size
kernel: [13cc00000, 13ffa2fff]
so init_size increase 20 pages 80k.
Fixes: f47233c2d34f ("x86/mm/ASLR: Propagate base load address calculation")
Link: http://marc.info/?l=linux-kernel&m=142492905425130&w=2
Reported-by: Ying Huang <ying.huang@...el.com>
Cc: Ying Huang <ying.huang@...el.com>
Cc: "H. Peter Anvin" <hpa@...or.com>
Cc: Matt Fleming <matt.fleming@...el.com>
Cc: Kees Cook <keescook@...omium.org>
Signed-off-by: Yinghai Lu <yinghai@...nel.org>
---
arch/x86/boot/Makefile | 2 +-
arch/x86/boot/compressed/head_32.S | 11 +++++++++--
arch/x86/boot/compressed/head_64.S | 8 ++++++--
arch/x86/boot/compressed/mkpiggy.c | 7 ++-----
arch/x86/boot/compressed/vmlinux.lds.S | 2 ++
arch/x86/boot/header.S | 14 ++++++++++++--
arch/x86/kernel/asm-offsets.c | 1 +
arch/x86/kernel/vmlinux.lds.S | 1 +
8 files changed, 34 insertions(+), 12 deletions(-)
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 57bbf2f..863ef25 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -86,7 +86,7 @@ targets += voffset.h
$(obj)/voffset.h: vmlinux FORCE
$(call if_changed,voffset)
-sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|_rodata\|z_.*\)$$/\#define ZO_\2 0x\1/p'
quiet_cmd_zoffset = ZOFFSET $@
cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 1d7fbbc..1410c42 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -147,7 +147,9 @@ preferred_addr:
1:
/* Target address to relocate to for decompression */
- addl $z_extract_offset, %ebx
+ movl BP_init_size(%esi), %eax
+ subl $_end, %eax
+ addl %eax, %ebx
/* Set up the stack */
leal boot_stack_end(%ebx), %esp
@@ -209,8 +211,13 @@ relocated:
/* push arguments for decompress_kernel: */
pushl $z_run_size /* size of kernel with .bss and .brk */
pushl $z_output_len /* decompressed length, end of relocs */
- leal z_extract_offset_negative(%ebx), %ebp
+
+ movl BP_init_size(%esi), %eax
+ subl $_end, %eax
+ movl %ebx, %ebp
+ subl %eax, %ebp
pushl %ebp /* output address */
+
pushl $z_input_len /* input_len */
leal input_data(%ebx), %eax
pushl %eax /* input_data */
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 6b1766c..4e30ee3 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -101,7 +101,9 @@ ENTRY(startup_32)
1:
/* Target address to relocate to for decompression */
- addl $z_extract_offset, %ebx
+ movl BP_init_size(%esi), %eax
+ subl $_end, %eax
+ addl %eax, %ebx
/*
* Prepare for entering 64 bit mode
@@ -329,7 +331,9 @@ preferred_addr:
1:
/* Target address to relocate to for decompression */
- leaq z_extract_offset(%rbp), %rbx
+ movl BP_init_size(%rsi), %ebx
+ subl $_end, %ebx
+ addq %rbp, %rbx
/* Set up the stack */
leaq boot_stack_end(%rbx), %rsp
diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c
index d8222f2..5faad09 100644
--- a/arch/x86/boot/compressed/mkpiggy.c
+++ b/arch/x86/boot/compressed/mkpiggy.c
@@ -83,11 +83,8 @@ int main(int argc, char *argv[])
printf("z_input_len = %lu\n", ilen);
printf(".globl z_output_len\n");
printf("z_output_len = %lu\n", (unsigned long)olen);
- printf(".globl z_extract_offset\n");
- printf("z_extract_offset = 0x%lx\n", offs);
- /* z_extract_offset_negative allows simplification of head_32.S */
- printf(".globl z_extract_offset_negative\n");
- printf("z_extract_offset_negative = -0x%lx\n", offs);
+ printf(".globl z_min_extract_offset\n");
+ printf("z_min_extract_offset = 0x%lx\n", offs);
printf(".globl z_run_size\n");
printf("z_run_size = %lu\n", run_size);
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index 34d047c..6d6158e 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -35,6 +35,7 @@ SECTIONS
*(.text.*)
_etext = . ;
}
+ . = ALIGN(PAGE_SIZE); /* keep ADDON_ZO_SIZE page aligned */
.rodata : {
_rodata = . ;
*(.rodata) /* read-only data */
@@ -70,5 +71,6 @@ SECTIONS
_epgtable = . ;
}
#endif
+ . = ALIGN(PAGE_SIZE); /* keep ZO size page aligned */
_end = .;
}
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 16ef025..226d166 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -440,12 +440,22 @@ setup_data: .quad 0 # 64-bit physical pointer to
pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
-#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset)
+# don't overlap data area of ZO with VO bss
+#define ADDON_ZO_SIZE (ZO__end - ZO__rodata)
+
+#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_min_extract_offset)
#define VO_INIT_SIZE (VO__end - VO__text)
#if ZO_INIT_SIZE > VO_INIT_SIZE
+
+/* only add the difference to cover ADDON_ZO */
+#if (ZO_INIT_SIZE - VO_INIT_SIZE) < ADDON_ZO_SIZE
+#define INIT_SIZE (ZO_INIT_SIZE + (ADDON_ZO_SIZE-(ZO_INIT_SIZE - VO_INIT_SIZE)))
+#else
#define INIT_SIZE ZO_INIT_SIZE
+#endif
+
#else
-#define INIT_SIZE VO_INIT_SIZE
+#define INIT_SIZE (VO_INIT_SIZE + ADDON_ZO_SIZE)
#endif
init_size: .long INIT_SIZE # kernel initialization size
handover_offset: .long 0 # Filled in by build.c
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index 9f6b934..0e8e4f7 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -66,6 +66,7 @@ void common(void) {
OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
OFFSET(BP_version, boot_params, hdr.version);
OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment);
+ OFFSET(BP_init_size, boot_params, hdr.init_size);
OFFSET(BP_pref_address, boot_params, hdr.pref_address);
OFFSET(BP_code32_start, boot_params, hdr.code32_start);
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 00bf300..5816920 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -325,6 +325,7 @@ SECTIONS
__brk_limit = .;
}
+ . = ALIGN(PAGE_SIZE); /* keep VO_INIT_SIZE page aligned */
_end = .;
STABS_DEBUG
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists