| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 19 Mar 2015 10:39:25 -0300
From: Arnaldo Carvalho de Melo <acme@...nel.org>
To: Brian Norris <computersforpeace@...il.com>,
Jiri Olsa <jolsa@...nel.org>
Cc: Michal Marek <mmarek@...e.cz>, linux-kernel@...r.kernel.org,
linux-kbuild@...r.kernel.org, David Howells <dhowells@...hat.com>,
Borislav Petkov <bp@...e.de>, Sam Ravnborg <sam@...nborg.org>
Subject: Re: [PATCH] tools: unbreak 'make tools/*'
Em Wed, Jan 28, 2015 at 08:47:36PM -0800, Brian Norris escreveu:
> The following targets should be supported from the top-level source
> directory, but were broken by commit 7e1c04779efd ("kbuild: Use relative
> path for $(objtree)"):
> $ make tools/
> $ make tools/perf
> $ make O=$(BUILDDIR) tools/perf
> The tools/ and tools/% targets are passing the top-level build directory
> as an O= argument, so we need a full path, not a relative one, as the
> $(O) variable will be reinterpreted by the sub-makefile.
> Signed-off-by: Brian Norris <computersforpeace@...il.com>
> Cc: Michal Marek <mmarek@...e.cz>
After this patch:
$ make mrproper
[acme@...andy linux]$ make tools/
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --silentoldconfig Kconfig
***
*** Configuration file ".config" not found!
***
*** Please run some configurator (e.g. "make oldconfig" or
*** "make menuconfig" or "make xconfig").
***
make[2]: *** [silentoldconfig] Error 1
make[1]: *** [silentoldconfig] Error 2
Possible targets:
acpi - ACPI tools
cgroup - cgroup tools
cpupower - a tool for all things x86 CPU power
<SNIP>
vm - misc vm tools
x86_energy_perf_policy - Intel energy policy tool
tmon - thermal monitoring and tuning tool
You can do:
$ make -C tools/ <tool>_install
from the kernel command line to build and install one of
the tools above
$ make tools/install
installs all tools.
Cleaning targets:
all of the above with the "_clean" string appended cleans
the respective build directory.
clean: a summary clean target to clean _all_ folders
[acme@...andy linux]$
[acme@...andy linux]$ make allyesconfig
scripts/kconfig/conf --allyesconfig Kconfig
#
# configuration written to .config
#
[acme@...andy linux]$ make tools/
scripts/kconfig/conf --silentoldconfig Kconfig
scripts/Makefile.kasan:16: Cannot use CONFIG_KASAN: -fsanitize=kernel-address is not supported by compiler
Possible targets:
acpi - ACPI tools
cgroup - cgroup tools
cpupower - a tool for all things x86 CPU power
<SNIP>
vm - misc vm tools
x86_energy_perf_policy - Intel energy policy tool
tmon - thermal monitoring and tuning tool
You can do:
$ make -C tools/ <tool>_install
from the kernel command line to build and install one of
the tools above
$ make tools/install
installs all tools.
Cleaning targets:
all of the above with the "_clean" string appended cleans
the respective build directory.
clean: a summary clean target to clean _all_ folders
[acme@...andy linux]$
--------------------------------------------------------
Better than before, but can't we avoid these two lines:
scripts/kconfig/conf --silentoldconfig Kconfig
scripts/Makefile.kasan:16: Cannot use CONFIG_KASAN: -fsanitize=kernel-address is not supported by compiler
--------------------------------------------------------
And the need for a .config file to be present in the build dir?
Also for this case it didn't improve the situation, I think:
[acme@...andy linux]$ make -C tools/perf clean
make: Entering directory `/home/acme/git/linux/tools/perf'
CLEAN libtraceevent
<SNIP>
CLEAN Documentation
CLEAN python
make: Leaving directory `/home/acme/git/linux/tools/perf'
[acme@...andy linux]$ make tools/perf/
scripts/Makefile.kasan:16: Cannot use CONFIG_KASAN: -fsanitize=kernel-address is not supported by compiler
make[1]: Nothing to be done for `perf/'.
[acme@...andy linux]$ make -C tools/perf/
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
<SNIP>
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
config/Makefile:308: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
config/Makefile:598: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev
CC arch/common.o
CC fd/array.o
CC ui/setup.o
CC event-parse.o
CC util/abspath.o
CC scripts/perl/Perf-Trace-Util/Context.o
CC fs/fs.o
LD fd/libapi-in.o
CC event-plugin.o
-------------------------------------------------------
And this I think is related to Jiri's recent move of the feature detection from
tools/perf/ to tools/build/, when we remove that trailing slash:
[acme@...andy linux]$ make tools/perf
scripts/kconfig/conf --silentoldconfig Kconfig
scripts/Makefile.kasan:16: Cannot use CONFIG_KASAN: -fsanitize=kernel-address is not supported by compiler
DESCEND lib/api
make[3]: tools/build/Makefile.build: No such file or directory
make[3]: *** No rule to make target `tools/build/Makefile.build'. Stop.
make[2]: *** [/home/acme/git/linux/tools/lib/api/libapi-in.o] Error 2
make[1]: *** [libapikfs] Error 2
make: *** [tools/perf] Error 2
[acme@...andy linux]$
-------------------------------------------------------
Jiri, can you take a look at the above?
It works if I use 'make -C', with O=, like I usually do, or without it:
-------------------------------------------------------
[acme@...andy linux]$ make -C tools/perf
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
<SNIP>
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
config/Makefile:308: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
config/Makefile:598: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev
GEN common-cmds.h
CC util/abspath.o
CC ui/setup.o
CC arch/common.o
-------------------------------------------------------
Can you please check these issues, using my perf/core branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git
- Arnaldo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists