[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20150319210527.GI26935@google.com>
Date: Thu, 19 Mar 2015 16:05:27 -0500
From: Bjorn Helgaas <bhelgaas@...gle.com>
To: Ray Jui <rjui@...adcom.com>
Cc: Arnd Bergmann <arnd@...db.de>, Hauke Mehrtens <hauke@...ke-m.de>,
Paul Bolle <pebolle@...cali.nl>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Florian Fainelli <f.fainelli@...il.com>,
Dmitry Torokhov <dtor@...gle.com>,
Anatol Pomazau <anatol@...gle.com>,
Scott Branden <sbranden@...adcom.com>,
linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com, devicetree@...r.kernel.org
Subject: Re: [PATCH v7 0/4] pci: iproc: Add Broadcom iProc PCIe support
[+cc Florian]
On Thu, Mar 12, 2015 at 05:48:48PM -0700, Ray Jui wrote:
> This patch series adds the support for Broadcom iProc PCIe controller
>
> pcie-iproc.c servers as the common core driver, and front-end bus
> interface needs to be added to support different bus interfaces
>
> pcie-iproc-pltfm.c contains the support for the platform bus interface
>
> Changes from v6:
> - Fix print formatting
> - Fix section mismatch warning by removing __init from the probe function
> - Fix Kconfig to force it only compiling for ARM based platforms
>
> Changes from v5:
> - Sync code base to v4.0-rc2
> - Change export symbols of common PCI functions to GPL only
> - Add comment to describe how configuration register access are protected
> at the higher layer through 'pci_lock'
> - Use generic PCI functions for configuration register access and implement
> 'map_bus' callback to support it
> - Move 'pci_fixup_irqs' to before devices are added to the bus
> - Remove 'extern' from function prototype declared in the header
>
> Changes from v4:
> - iProc PCIe driver module support was not included in patch series v4.
> This patch series (v5) fixes it
>
> Changes from v3:
> - Export symbols of several PCI functions so they can be used by drivers
> compiled as kernel module
> - Add additional support to the Broadcom iProc PCIe driver so it can be
> installed/uninstalled as kernel loadable module
>
> Changes from v2:
> - Major rework of the PCIe driver to factor out common generic code from
> front-end bus interface. Support for generic platform bus interface is
> also added
> - Adapt to several new PCI APIs that have been introduced lately
>
> Changes from v1:
> - Add standard PCI interrupt DT properties "#interrupt-cells",
> "interrupt-map-mask" and "interrupt-map" so legacy INTx interrupts can be
> supported by using standard PCI OF IRQ parsing function
> - Get rid of custom IRQ mapping function in the driver. Use
> of_irq_parse_and_map_pci instead
>
> Ray Jui (4):
> PCI: Export symbols of PCI functions
> pci: iProc: define iProc PCIe platform bus binding
> pci: iproc: Add Broadcom iProc PCIe support
> ARM: dts: enable PCIe support for Cygnus
I applied patches 1-3 to pci/host-iproc for v4.1, thanks! I didn't apply
patch 4 because Florian said he'd already applied it to devicetree/next.
I normally look for a MAINTAINERS entry, but your existing entry for
"BROADCOM CYGNUS/IPROC ARM ARCHITECTURE" has wildcards that already include
these new files.
> .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 63 +++++
> arch/arm/boot/dts/bcm-cygnus.dtsi | 42 +++
> arch/arm/boot/dts/bcm958300k.dts | 8 +
> drivers/pci/host/Kconfig | 17 ++
> drivers/pci/host/Makefile | 2 +
> drivers/pci/host/pcie-iproc-pltfm.c | 108 ++++++++
> drivers/pci/host/pcie-iproc.c | 268 ++++++++++++++++++++
> drivers/pci/host/pcie-iproc.h | 42 +++
> drivers/pci/pci.c | 1 +
> drivers/pci/probe.c | 1 +
> drivers/pci/remove.c | 2 +
> drivers/pci/setup-bus.c | 1 +
> drivers/pci/setup-irq.c | 1 +
> 13 files changed, 556 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
> create mode 100644 drivers/pci/host/pcie-iproc-pltfm.c
> create mode 100644 drivers/pci/host/pcie-iproc.c
> create mode 100644 drivers/pci/host/pcie-iproc.h
>
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists