| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1426850431-31550-1-git-send-email-martink@posteo.de>
Date: Fri, 20 Mar 2015 12:20:31 +0100
From: Martin Kepplinger <martink@...teo.de>
To: mark.rutland@....com, robh+dt@...nel.org, Pawel.Moll@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
dmitry.torokhov@...il.com, alexander.stein@...tec-electronic.com
Cc: hadess@...ess.net, akpm@...ux-foundation.org,
gregkh@...uxfoundation.org, linux-api@...r.kernel.org,
devicetree@...r.kernel.org, linux-input@...r.kernel.org,
linux-kernel@...r.kernel.org,
Martin Kepplinger <martin.kepplinger@...obroma-systems.com>,
Christoph Muellner <christoph.muellner@...obroma-systems.com>
Subject: [PATCH v4] add support for Freescale's MMA8653FC 10 bit accelerometer
From: Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
The MMA8653FC is a low-power, three-axis, capacitive micromachined
accelerometer with 10 bits of resolution with flexible user-programmable
options.
Embedded interrupt functions enable overall power savings, by relieving the
host processor from continuously polling data, for example using the poll()
system call.
The device can be configured to generate wake-up interrupt signals from any
combination of the configurable embedded functions, enabling the MMA8653FC
to monitor events while remaining in a low-power mode during periods of
inactivity.
This driver provides devicetree properties to program the device's behaviour
and a simple, tested and documented sysfs interface. The data sheet and more
information is available on Freescale's website.
Signed-off-by: Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@...obroma-systems.com>
---
patch revision history
......................
v4 changes DT propery names, adds a missing interrupt source and removes
the DT option to set interrupt line active high due to unsuccesful testing
v3 moves the driver from drivers/input/misc to drivers/misc
v2 corrects licensing and commit messages and adds appropriate recipients
.../testing/sysfs-bus-i2c-devices-fsl-mma8653fc | 39 +
.../devicetree/bindings/misc/fsl,mma8653fc.txt | 102 +++
MAINTAINERS | 5 +
drivers/misc/Kconfig | 11 +
drivers/misc/Makefile | 1 +
drivers/misc/mma8653fc.c | 897 +++++++++++++++++++++
6 files changed, 1055 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-fsl-mma8653fc
create mode 100644 Documentation/devicetree/bindings/misc/fsl,mma8653fc.txt
create mode 100644 drivers/misc/mma8653fc.c
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsl-mma8653fc b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsl-mma8653fc
new file mode 100644
index 0000000..8172c27
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsl-mma8653fc
@@ -0,0 +1,39 @@
+What: /sys/bus/i2c/drivers/mma8653fc/*/standby
+Date: March 2015
+Contact: Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
+Description:
+ Write 0 to this in order to turn on the device, and 1 to turn
+ it off. Read to see if it is turned on or off.
+
+
+What: /sys/bus/i2c/drivers/mma8653fc/*/currentmode
+Date: March 2015
+Contact: Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
+Description:
+ Reading this provides the current state of the device, read
+ directly from a register. This can be "standby", "wake" or
+ "sleep".
+
+
+What: /sys/bus/i2c/drivers/mma8653fc/*/position
+Date: March 2015
+Contact: Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
+Description:
+ Read only. Without interrupts enabled gets current position
+ values by reading. Poll "position" with interrupt conditions
+ set, to get notified; see Documentation/.../fsl,mma8653fc.txt
+
+ position file format:
+ "x y z [landscape/portrait status] [front/back status]"
+
+ x y z values:
+ in mg
+ landscape/portrait status char:
+ r landscape right
+ d portrait down
+ u portrait up
+ l landscape left
+ front/back status char:
+ f front facing
+ b back facing
+
diff --git a/Documentation/devicetree/bindings/misc/fsl,mma8653fc.txt b/Documentation/devicetree/bindings/misc/fsl,mma8653fc.txt
new file mode 100644
index 0000000..5015813
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/fsl,mma8653fc.txt
@@ -0,0 +1,102 @@
+Freescale MMA8653FC 3-axis Accelerometer
+
+Required properties:
+- compatible
+ "fsl,mma8653fc"
+- reg
+ I2C address
+
+Optional properties:
+
+- interrupt-parent
+ a phandle for the interrupt controller (see
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt)
+- interrupts
+ interrupt line to which the chip is connected (active low)
+- int1
+ set to use interrupt line 1, default is line 2
+ the interrupt sources can be routed to one of the two lines
+- ir-freefall-motion-x
+ activate freefall/motion interrupts on x axis
+- ir-freefall-motion-y
+ activate freefall/motion interrupts on y axis
+- ir-freefall-motion-z
+ activate freefall/motion interrupts on z axis
+- irq-threshold
+ 0 < value < 8000: threshold for motion interrupts in mg
+- ir-landscape-portrait
+ activate landscape/portrait interrupts
+- ir-auto-wake
+ activate wake/sleep change interrupts
+- ir-data-ready:
+ activate data-ready interrupts
+ Interrupt events can be activated in any combination.
+- dynamic-range
+ 2, 4, or 8: dynamic measurement range in g, default: 2
+ In ±2 g mode, sensitivity = 256 counts/g.
+ In ±4 g mode, sensitivity = 128 counts/g.
+ In ±8 g mode, sensitivity = 64 counts/g.
+- auto-wake-sleep
+ auto sleep mode (lower frequency)
+- motion-mode
+ use motion mode instead of freefall mode (trigger if >threshold).
+ per default an interrupt occurs if motion values fall below the
+ value set in "threshold" and therefore can detect free fall on the
+ vertical axis (depending on the position of the device).
+ Setting this values inverts the behaviour and an interrupt occurs
+ above the threshold value, so usually activate horizontal axis in
+ this case.
+
+- x-offset
+ 0 < value < 500: calibration offset in mg
+ The offset correction values are used to realign the Zero-g position
+ of the X, Y, and Z-axis after the device is mounted on a board.
+ this value has an offset of 250 itself:
+ 0 is -250mg, 250 is 0 mg, 500 is 250mg
+- y-offset
+ see x-offset
+- z-offset
+ see x-offset
+
+Example 1:
+for a device laying on flat ground to recognize acceleration over 100mg.
+x-axis is calibrated to +10mg. Adapt interrupt line to your device.
+
+mma8653fc@1d {
+ compatible = "fsl,mma8653fc";
+ interrupt-parent = <&gpio1>;
+ interrupts = <5 0>;
+ reg = <0x1d>;
+
+ dynamic-range = <2>;
+ motion-mode;
+ ir-freefall-motion-x;
+ ir-freefall-motion-y;
+ irq-threshold = <100>;
+ x-offset = <160>;
+};
+
+Example 2:
+for a device mounted on a wall with y being the vertical axis. This recognizes
+y-acceleration below 800mg, so free fall or changing the orientation of the
+device (y not being the vertical axis and having ~1000mg anymore).
+
+mma8653fc@1d {
+ compatible = "fsl,mma8653fc";
+ interrupt-parent = <&gpio1>;
+ interrupts = <5 0>;
+ reg = <0x1d>;
+
+ dynamic-range = <2>;
+ ir-freefall-motion-y;
+ irq-threshold = <800>;
+};
+
+Example 3:
+minimal example. lets users read current acceleration values. No polling
+is available.
+
+mma8653fc@1d {
+ compatible = "fsl,mma8653fc";
+ reg = <0x1d>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 0e1abe8..04c080d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4104,6 +4104,11 @@ S: Maintained
F: include/linux/platform_data/video-imxfb.h
F: drivers/video/fbdev/imxfb.c
+FREESCALE MMA8653FC ACCELEROMETER I2C DRIVER
+M: Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
+S: Maintained
+F: drivers/input/misc/mma8653fc.c
+
FREESCALE QUAD SPI DRIVER
M: Han Xu <han.xu@...escale.com>
L: linux-mtd@...ts.infradead.org
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 006242c..05ef1c1 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -324,6 +324,17 @@ config ISL29020
This driver can also be built as a module. If so, the module
will be called isl29020.
+config MMA8653FC
+ tristate "MMA8653FC - Freescale's 3-Axis, 10-bit Digital Accelerometer"
+ depends on I2C
+ default n
+ help
+ Say Y here if you want to support Freescale's MMA8653FC Accelerometer
+ through I2C interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mma8653fc.
+
config SENSORS_TSL2550
tristate "Taos TSL2550 ambient light sensor"
depends on I2C && SYSFS
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7d5c4cd..044c8fc 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_ICS932S401) += ics932s401.o
obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
+obj-$(CONFIG_MMA8653FC) += mma8653fc.o
obj-$(CONFIG_PHANTOM) += phantom.o
obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o
obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o
diff --git a/drivers/misc/mma8653fc.c b/drivers/misc/mma8653fc.c
new file mode 100644
index 0000000..f9b8cf9
--- /dev/null
+++ b/drivers/misc/mma8653fc.c
@@ -0,0 +1,897 @@
+/*
+ * mma8653fc.c - Support for Freescale MMA8653FC 3-axis 10-bit accelerometer
+ *
+ * Copyright (c) 2014 Theobroma Systems Design and Consulting GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/types.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#define DRV_NAME "mma8653fc"
+#define MMA8653FC_DEVICE_ID 0x5a
+
+#define MMA8653FC_STATUS 0x00
+
+#define ZYXOW_MASK 0x80
+#define ZYXDR 0x08
+
+#define MMA8653FC_WHO_AM_I 0x0d
+
+#define MMA8653FC_SYSMOD 0x0b
+#define STATE_STANDBY 0x00
+#define STATE_WAKE 0x01
+#define STATE_SLEEP 0x02
+
+#define MMA8450_STATUS_ZXYDR 0x08
+
+/*
+ * 10 bit output data registers
+ * MSB: 7:0 bits 9:2 of data word
+ * LSB: 7:6 bits 1:0 of data word
+ */
+#define MMA8653FC_OUT_X_MSB 0x01
+#define MMA8653FC_OUT_X_LSB 0x02
+#define MMA8653FC_OUT_Y_MSB 0x03
+#define MMA8653FC_OUT_Y_LSB 0x04
+#define MMA8653FC_OUT_Z_MSB 0x05
+#define MMA8653FC_OUT_Z_LSB 0x06
+
+/*
+ * Portrait/Landscape Status
+ */
+#define MMA8653FC_PL_STATUS 0x10
+
+#define NEWLP 0x80
+#define LAPO_HIGH 0x04
+#define LAPO_LOW 0x02
+#define BAFRO 0x01
+
+/*
+ * Portrait/Landscape Configuration
+ */
+#define MMA8653FC_PL_CFG 0x11
+
+#define PL_EN (1 << 6)
+
+/*
+ * Data calibration registers
+ */
+#define MMA8653FC_OFF_X 0x2f
+#define MMA8653FC_OFF_Y 0x30
+#define MMA8653FC_OFF_Z 0x31
+
+/* 0 to 500 for dts, but -250 to 250 in mg */
+#define DEFAULT_OFF 250
+
+/*
+ * bits 1:0 dynamic range
+ * 00 +/- 2g
+ * 01 +/- 4g
+ * 10 +/- 8g
+ *
+ * HPF_Out bit 4 - data high pass or low pass filtered
+ */
+#define MMA8653FC_XYZ_DATA_CFG 0x0e
+
+#define RANGE_MASK 0x03
+#define RANGE2G 0x00
+#define RANGE4G 0x01
+#define RANGE8G 0x02
+/* values for calculation */
+#define SHIFT_2G 8
+#define INCR_2G 128
+#define SHIFT_4G 7
+#define INCR_4G 64
+#define SHIFT_8G 6
+#define INCR_8G 32
+#define DYN_RANGE_2G 2
+#define DYN_RANGE_4G 4
+#define DYN_RANGE_8G 8
+
+/*
+ * System Control Reg 1
+ */
+#define MMA8653FC_CTRL_REG1 0x2a
+
+#define ACTIVE_BIT (1 << 0)
+#define ODR_MASK 0x38
+#define ODR_DEFAULT 0x20 /* 50 Hz */
+#define ASLP_RATE_MASK 0xc0
+#define ASLP_RATE_DEFAULT 0x80 /* 6.25 Hz */
+
+/*
+ * Sys Control Reg 2
+ *
+ * auto-sleep enable, software reset
+ */
+#define MMA8653FC_CTRL_REG2 0x2b
+
+#define SLPE (1 << 2)
+#define SELFTEST (1 << 7)
+#define SOFT_RESET (1 << 6)
+
+/*
+ * Interrupt Source
+ */
+#define MMA8653FC_INT_SOURCE 0x0c
+
+#define SRC_ASLP (1 << 7)
+#define SRC_LNDPRT (1 << 4)
+#define SRC_FF_MT (1 << 2)
+#define SRC_DRDY (1 << 0)
+
+/*
+ * Interrupt Control Register
+ *
+ * default: active low
+ * default push-pull, not open-drain
+ */
+#define MMA8653FC_CTRL_REG3 0x2c
+
+#define WAKE_LNDPRT (1 << 5)
+#define WAKE_FF_MT (1 << 3)
+#define IPOL (1 << 1)
+#define PP_OD (1 << 0)
+
+/*
+ * Interrupt Enable Register
+ */
+#define MMA8653FC_CTRL_REG4 0x2d
+
+#define INT_EN_ASLP (1 << 7)
+#define INT_EN_LNDPRT (1 << 4)
+#define INT_EN_FF_MT (1 << 2)
+#define INT_EN_DRDY (1 << 0)
+
+/*
+ * Interrupt Configuration Register
+ * bit value 0 ... INT2 (default)
+ * bit value 1 ... INT1
+ */
+#define MMA8653FC_CTRL_REG5 0x2e
+
+#define INT_CFG_ASLP (1 << 7)
+#define INT_CFG_LNDPRT (1 << 4)
+#define INT_CFG_FF_MT (1 << 2)
+#define INT_CFG_DRDY (1 << 0)
+
+/*
+ * Freefall / Motion Configuration Register
+ *
+ * Event Latch enable/disable, motion or freefall mode
+ * and event flag enable per axis
+ */
+#define MMA8653FC_FF_MT_CFG 0x15
+
+#define FF_MT_CFG_ELE (1 << 7)
+#define FF_MT_CFG_OAE (1 << 6)
+#define FF_MT_CFG_ZEFE (1 << 5)
+#define FF_MT_CFG_YEFE (1 << 4)
+#define FF_MT_CFG_XEFE (1 << 3)
+
+/*
+ * Freefall / Motion Source Register
+ */
+#define MMA8653FC_FF_MT_SRC 0x16
+
+/*
+ * Freefall / Motion Threshold Register
+ *
+ * define motion threshold
+ * 0.063 g/LSB, 127 counts(0x7f) (7 bit from LSB)
+ * range: 0.063g - 8g
+ */
+#define MMA8653FC_FF_MT_THS 0x17
+
+struct axis_triple {
+ s16 x;
+ s16 y;
+ s16 z;
+};
+
+struct mma8653fc_pdata {
+ s8 x_axis_offset;
+ s8 y_axis_offset;
+ s8 z_axis_offset;
+ bool auto_wake_sleep;
+ u32 range;
+ bool int1;
+ bool motion_mode;
+ u8 freefall_motion_thr;
+ bool int_src_data_ready;
+ bool int_src_ff_mt_x;
+ bool int_src_ff_mt_y;
+ bool int_src_ff_mt_z;
+ bool int_src_lndprt;
+ bool int_src_aslp;
+};
+
+struct mma8653fc {
+ struct i2c_client *client;
+ struct mutex mutex;
+ struct mma8653fc_pdata pdata;
+ struct axis_triple saved;
+ char orientation;
+ char bafro;
+ bool standby;
+ int irq;
+ unsigned int_mask;
+ u8 (*read)(struct mma8653fc *, unsigned char);
+ int (*write)(struct mma8653fc *, unsigned char, unsigned char);
+};
+
+/* defaults */
+static const struct mma8653fc_pdata mma8653fc_default_init = {
+ .range = 2,
+ .x_axis_offset = DEFAULT_OFF,
+ .y_axis_offset = DEFAULT_OFF,
+ .z_axis_offset = DEFAULT_OFF,
+ .auto_wake_sleep = false,
+ .int1 = false,
+ .motion_mode = false,
+ .freefall_motion_thr = 5,
+ .int_src_data_ready = false,
+ .int_src_ff_mt_x = false,
+ .int_src_ff_mt_y = false,
+ .int_src_ff_mt_z = false,
+ .int_src_lndprt = false,
+ .int_src_aslp = false,
+};
+
+static void mma8653fc_get_triple(struct mma8653fc *mma)
+{
+ u8 buf[6];
+ u8 status;
+
+ buf[0] = 0;
+
+ status = mma->read(mma, MMA8653FC_STATUS);
+ if (status & ZYXOW_MASK)
+ dev_dbg(&mma->client->dev, "previous read not completed\n");
+
+ buf[0] = mma->read(mma, MMA8653FC_OUT_X_MSB);
+ buf[1] = mma->read(mma, MMA8653FC_OUT_X_LSB);
+ buf[2] = mma->read(mma, MMA8653FC_OUT_Y_MSB);
+ buf[3] = mma->read(mma, MMA8653FC_OUT_Y_LSB);
+ buf[4] = mma->read(mma, MMA8653FC_OUT_Z_MSB);
+ buf[5] = mma->read(mma, MMA8653FC_OUT_Z_LSB);
+
+ mutex_lock(&mma->mutex);
+ /* move from registers to s16 */
+ mma->saved.x = (buf[1] | (buf[0] << 8)) >> 6;
+ mma->saved.y = (buf[3] | (buf[2] << 8)) >> 6;
+ mma->saved.z = (buf[5] | (buf[4] << 8)) >> 6;
+ mma->saved.x = sign_extend32(mma->saved.x, 9);
+ mma->saved.y = sign_extend32(mma->saved.y, 9);
+ mma->saved.z = sign_extend32(mma->saved.z, 9);
+
+ /* calc g, see data sheet and application note */
+ switch (mma->pdata.range) {
+ case DYN_RANGE_2G:
+ mma->saved.x = le16_to_cpu((1000 * mma->saved.x +
+ INCR_2G) >> SHIFT_2G);
+ mma->saved.y = le16_to_cpu((1000 * mma->saved.y +
+ INCR_2G) >> SHIFT_2G);
+ mma->saved.z = le16_to_cpu((1000 * mma->saved.z +
+ INCR_2G) >> SHIFT_2G);
+ break;
+ case DYN_RANGE_4G:
+ mma->saved.x = le16_to_cpu((1000 * mma->saved.x +
+ INCR_4G) >> SHIFT_4G);
+ mma->saved.y = le16_to_cpu((1000 * mma->saved.y +
+ INCR_4G) >> SHIFT_4G);
+ mma->saved.z = le16_to_cpu((1000 * mma->saved.z +
+ INCR_4G) >> SHIFT_4G);
+ break;
+ case DYN_RANGE_8G:
+ mma->saved.x = le16_to_cpu((1000 * mma->saved.x +
+ INCR_8G) >> SHIFT_8G);
+ mma->saved.y = le16_to_cpu((1000 * mma->saved.y +
+ INCR_8G) >> SHIFT_8G);
+ mma->saved.z = le16_to_cpu((1000 * mma->saved.z +
+ INCR_8G) >> SHIFT_8G);
+ break;
+ default:
+ dev_err(&mma->client->dev, "internal data corrupt\n");
+ }
+ mutex_unlock(&mma->mutex);
+}
+
+static void mma8653fc_get_orientation(struct mma8653fc *mma, u8 byte)
+{
+ if ((byte & LAPO_HIGH) && !(LAPO_LOW))
+ mma->orientation = 'r'; /* landscape right */
+ if (!(byte & LAPO_HIGH) && (byte & LAPO_LOW))
+ mma->orientation = 'd'; /* portrait down */
+ if (!(byte & LAPO_HIGH) && !(byte & LAPO_LOW))
+ mma->orientation = 'u'; /* portrait up */
+ if ((byte & LAPO_HIGH) && (byte & LAPO_LOW))
+ mma->orientation = 'l'; /* landscape left */
+
+ if (byte & BAFRO)
+ mma->bafro = 'b'; /* back facing */
+ else
+ mma->bafro = 'f'; /* front facing */
+}
+
+static irqreturn_t mma8653fc_irq(int irq, void *handle)
+{
+ struct mma8653fc *mma = handle;
+ u8 int_src;
+ u8 byte;
+
+ int_src = mma->read(mma, MMA8653FC_INT_SOURCE);
+ if (int_src & SRC_DRDY)
+ /* data ready handle */
+ if (int_src & SRC_FF_MT) {
+ /* freefall/motion change handle */
+ dev_dbg(&mma->client->dev,
+ "freefall or motion change\n");
+ byte = mma->read(mma, MMA8653FC_FF_MT_SRC);
+ }
+ if (int_src & SRC_LNDPRT) {
+ /* landscape/portrait change handle */
+ dev_dbg(&mma->client->dev,
+ "landscape / portrait change\n");
+ byte = mma->read(mma, MMA8653FC_PL_STATUS);
+ mma8653fc_get_orientation(mma, byte);
+ }
+ if (int_src & SRC_ASLP)
+ /* autosleep change handle */
+ mma8653fc_get_triple(mma);
+
+ sysfs_notify(&mma->client->dev.kobj, NULL, "position");
+
+ return IRQ_HANDLED;
+}
+
+static void __mma8653fc_enable(struct mma8653fc *mma)
+{
+ u8 byte;
+
+ byte = mma->read(mma, MMA8653FC_CTRL_REG1);
+ mma->write(mma, MMA8653FC_CTRL_REG1, byte | ACTIVE_BIT);
+}
+
+static void __mma8653fc_disable(struct mma8653fc *mma)
+{
+ u8 byte;
+
+ byte = mma->read(mma, MMA8653FC_CTRL_REG1);
+ mma->write(mma, MMA8653FC_CTRL_REG1, byte & ~ACTIVE_BIT);
+}
+
+static ssize_t mma8653fc_standby_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct mma8653fc *mma = i2c_get_clientdata(client);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", mma->standby);
+}
+
+static ssize_t mma8653fc_standby_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct mma8653fc *mma = i2c_get_clientdata(client);
+ unsigned int val;
+ int error;
+
+ error = kstrtouint(buf, 10, &val);
+ if (error)
+ return error;
+
+ mutex_lock(&mma->mutex);
+
+ if (val) {
+ if (!mma->standby)
+ __mma8653fc_disable(mma);
+ } else {
+ if (mma->standby)
+ __mma8653fc_enable(mma);
+ }
+
+ mma->standby = !!val;
+
+ mutex_unlock(&mma->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(standby, 0664, mma8653fc_standby_show,
+ mma8653fc_standby_store);
+
+static ssize_t mma8653fc_currentmode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct mma8653fc *mma = i2c_get_clientdata(client);
+ ssize_t count;
+ u8 byte;
+
+ byte = mma->read(mma, MMA8653FC_SYSMOD);
+ if (byte < 0)
+ return byte;
+
+ switch (byte) {
+ case STATE_STANDBY:
+ count = scnprintf(buf, PAGE_SIZE, "standby\n");
+ break;
+ case STATE_WAKE:
+ count = scnprintf(buf, PAGE_SIZE, "wake\n");
+ break;
+ case STATE_SLEEP:
+ count = scnprintf(buf, PAGE_SIZE, "sleep\n");
+ break;
+ default:
+ count = scnprintf(buf, PAGE_SIZE, "unknown\n");
+ }
+ return count;
+}
+static DEVICE_ATTR(currentmode, S_IRUGO, mma8653fc_currentmode_show, NULL);
+
+static ssize_t mma8653fc_position_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct mma8653fc *mma = i2c_get_clientdata(client);
+ ssize_t count;
+ u8 byte;
+
+ if (!mma->irq) {
+ byte = mma->read(mma, MMA8653FC_PL_STATUS);
+ if (byte & NEWLP)
+ mma8653fc_get_orientation(mma, byte);
+
+ byte = mma->read(mma, MMA8653FC_STATUS);
+ if (byte & ZYXDR)
+ mma8653fc_get_triple(mma);
+
+ msleep(20);
+ dev_dbg(&client->dev, "data polled\n");
+ }
+ mutex_lock(&mma->mutex);
+ count = scnprintf(buf, PAGE_SIZE, "%d %d %d %c %c\n",
+ mma->saved.x, mma->saved.y, mma->saved.z,
+ mma->orientation, mma->bafro);
+ mutex_unlock(&mma->mutex);
+
+ return count;
+}
+static DEVICE_ATTR(position, S_IRUGO, mma8653fc_position_show, NULL);
+
+static struct attribute *mma8653fc_attributes[] = {
+ &dev_attr_position.attr,
+ &dev_attr_standby.attr,
+ &dev_attr_currentmode.attr,
+ NULL,
+};
+
+static const struct attribute_group mma8653fc_attr_group = {
+ .attrs = mma8653fc_attributes,
+};
+
+static u8 mma8653fc_read(struct mma8653fc *mma, unsigned char reg)
+{
+ u8 val;
+
+ val = i2c_smbus_read_byte_data(mma->client, reg);
+ if (val < 0) {
+ dev_err(&mma->client->dev,
+ "failed to read %x register\n", reg);
+ }
+ return val;
+}
+
+static int mma8653fc_write(struct mma8653fc *mma, unsigned char reg,
+ unsigned char val)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(mma->client, reg, val);
+ if (ret) {
+ dev_err(&mma->client->dev,
+ "failed to write %x register\n", reg);
+ }
+ return ret;
+}
+
+static const struct of_device_id mma8653fc_dt_ids[] = {
+ { .compatible = "fsl,mma8653fc", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mma8653fc_dt_ids);
+
+static const struct mma8653fc_pdata *mma8653fc_probe_dt(struct device *dev)
+{
+ struct mma8653fc_pdata *pdata;
+ struct device_node *node = dev->of_node;
+ const struct of_device_id *match;
+ u32 testu32;
+ s32 tests32;
+
+ if (!node) {
+ dev_err(dev, "no associated DT data\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ match = of_match_device(mma8653fc_dt_ids, dev);
+ if (!match) {
+ dev_err(dev, "unknown device model\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ *pdata = mma8653fc_default_init;
+
+ /* overwrite from dts */
+ testu32 = pdata->x_axis_offset;
+ tests32 = 0;
+ of_property_read_u32(node, "x-offset", &testu32);
+ tests32 = testu32 - DEFAULT_OFF;
+ if ((tests32) && (tests32 <= DEFAULT_OFF) &&
+ (tests32 >= -DEFAULT_OFF)) {
+ dev_info(dev, "use %dmg offset on X axis\n", tests32);
+ /* calc register value, resolution: 1.96mg */
+ pdata->x_axis_offset = (s8) (tests32 / 2);
+ }
+ testu32 = pdata->y_axis_offset;
+ tests32 = 0;
+ of_property_read_u32(node, "y-offset", &testu32);
+ tests32 = testu32 - DEFAULT_OFF;
+ if ((tests32) && (tests32 <= DEFAULT_OFF) &&
+ (tests32 >= -DEFAULT_OFF)) {
+ dev_info(dev, "use %dmg offset on Y axis\n", tests32);
+ pdata->y_axis_offset = (s8) (tests32 / 2);
+ }
+ testu32 = pdata->z_axis_offset;
+ tests32 = 0;
+ of_property_read_u32(node, "z-offset", &testu32);
+ tests32 = testu32 - DEFAULT_OFF;
+ if ((tests32) && (tests32 <= DEFAULT_OFF) &&
+ (tests32 >= -DEFAULT_OFF)) {
+ dev_info(dev, "use %dmg offset on Z axis\n", tests32);
+ pdata->z_axis_offset = (s8) (tests32 / 2);
+ }
+
+ testu32 = 0;
+ of_property_read_u32(node, "dynamic-range", &testu32);
+ if ((testu32) && (testu32 != 2) && (testu32 != 4) && (testu32 != 8)) {
+ dev_warn(dev, "wrong value for full scale range in dtb\n");
+ } else {
+ if (testu32)
+ pdata->range = testu32;
+ }
+
+ if (of_property_read_bool(node, "auto-wake-sleep"))
+ pdata->auto_wake_sleep = true;
+
+ if (of_property_read_bool(node, "int1"))
+ pdata->int1 = true;
+
+ if (of_property_read_bool(node, "motion-mode"))
+ pdata->motion_mode = true;
+
+ if (of_property_read_bool(node, "ir-data-ready"))
+ pdata->int_src_data_ready = true;
+
+ if (of_property_read_bool(node, "ir-freefall-motion-x"))
+ pdata->int_src_ff_mt_x = true;
+
+ if (of_property_read_bool(node, "ir-freefall-motion-y"))
+ pdata->int_src_ff_mt_y = true;
+
+ if (of_property_read_bool(node, "ir-freefall-motion-z"))
+ pdata->int_src_ff_mt_z = true;
+
+ if (of_property_read_bool(node, "ir-auto-wake"))
+ pdata->int_src_aslp = true;
+
+ if (of_property_read_bool(node, "ir-landscape-portrait"))
+ pdata->int_src_lndprt = true;
+
+ testu32 = 0;
+ of_property_read_u32(node, "irq-threshold", &testu32);
+ /* always uses maximum range +/- 8000g, resolution 63mg */
+ if ((testu32 <= 8000) && (testu32 > 0)) {
+ dev_dbg(dev, "use freefall / motion threshold %dmg\n",
+ testu32);
+ /* calculate register value from mg */
+ pdata->freefall_motion_thr = (testu32 / 63) + 1;
+ }
+
+ return pdata;
+}
+static int mma8653fc_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mma8653fc *mma;
+ const struct mma8653fc_pdata *pdata;
+ int err;
+ u8 byte;
+
+ err = i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA);
+ if (!err) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ mma = kzalloc(sizeof(*mma), GFP_KERNEL);
+ if (!mma) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ pdata = dev_get_platdata(&client->dev);
+ if (!pdata) {
+ pdata = mma8653fc_probe_dt(&client->dev);
+ if (IS_ERR(pdata)) {
+ err = PTR_ERR(pdata);
+ pr_err("pdata from DT failed\n");
+ goto err_free_mem;
+ }
+ }
+ mma->pdata = *pdata;
+ pdata = &mma->pdata;
+ mma->client = client;
+ mma->read = &mma8653fc_read;
+ mma->write = &mma8653fc_write;
+
+ mutex_init(&mma->mutex);
+
+ i2c_set_clientdata(client, mma);
+
+ err = sysfs_create_group(&client->dev.kobj, &mma8653fc_attr_group);
+ if (err)
+ goto err_free_mem;
+
+ mma->irq = irq_of_parse_and_map(client->dev.of_node, 0);
+ if (!mma->irq) {
+ dev_err(&client->dev, "Unable to parse or map IRQ\n");
+ goto no_irq;
+ }
+
+ err = irq_set_irq_type(mma->irq, IRQ_TYPE_EDGE_FALLING);
+ if (err) {
+ dev_err(&client->dev, "set_irq_type failed\n");
+ goto err_free_mem;
+ }
+
+ err = request_threaded_irq(mma->irq, NULL, mma8653fc_irq, IRQF_ONESHOT,
+ dev_name(&mma->client->dev), mma);
+ if (err) {
+ dev_err(&client->dev, "irq %d busy?\n", mma->irq);
+ goto err_free_mem;
+ }
+
+ if (mma->write(mma, MMA8653FC_CTRL_REG2, SOFT_RESET))
+ goto err_free_irq;
+
+ __mma8653fc_disable(mma);
+ mma->standby = true;
+
+ /* enable desired interrupts */
+ mma->orientation = '\0';
+ mma->bafro = '\0';
+ byte = 0;
+ if (pdata->int_src_data_ready) {
+ byte |= INT_EN_DRDY;
+ dev_dbg(&client->dev, "DATA READY interrupt source enabled\n");
+ }
+ if (pdata->int_src_ff_mt_x || pdata->int_src_ff_mt_y ||
+ pdata->int_src_ff_mt_z) {
+ byte |= INT_EN_FF_MT;
+ dev_dbg(&client->dev, "FF MT interrupt source enabled\n");
+ }
+ if (pdata->int_src_lndprt) {
+ if (mma->write(mma, MMA8653FC_PL_CFG, PL_EN))
+ goto err_free_irq;
+ byte |= INT_EN_LNDPRT;
+ dev_dbg(&client->dev, "LNDPRT interrupt source enabled\n");
+ }
+ if (pdata->int_src_aslp) {
+ byte |= INT_EN_ASLP;
+ dev_dbg(&client->dev, "ASLP interrupt source enabled\n");
+ }
+ if (mma->write(mma, MMA8653FC_CTRL_REG4, byte))
+ goto err_free_irq;
+
+ /* force everything to line 1 */
+ if (pdata->int1) {
+ if (mma->write(mma, MMA8653FC_CTRL_REG5,
+ (INT_CFG_ASLP | INT_CFG_LNDPRT |
+ INT_CFG_FF_MT | INT_CFG_DRDY)))
+ goto err_free_irq;
+ dev_dbg(&client->dev, "using interrupt line 1\n");
+ }
+no_irq:
+ /* range mode */
+ byte = mma->read(mma, MMA8653FC_XYZ_DATA_CFG);
+ byte &= ~RANGE_MASK;
+ switch (pdata->range) {
+ case DYN_RANGE_2G:
+ byte |= RANGE2G;
+ dev_dbg(&client->dev, "use 2g range\n");
+ break;
+ case DYN_RANGE_4G:
+ byte |= RANGE4G;
+ dev_dbg(&client->dev, "use 4g range\n");
+ break;
+ case DYN_RANGE_8G:
+ byte |= RANGE8G;
+ dev_dbg(&client->dev, "use 8g range\n");
+ break;
+ default:
+ dev_err(&client->dev, "wrong range mode value\n");
+ goto err_free_irq;
+ }
+ if (mma->write(mma, MMA8653FC_XYZ_DATA_CFG, byte))
+ goto err_free_irq;
+
+ /* data calibration offsets */
+ if (pdata->x_axis_offset) {
+ if (mma->write(mma, MMA8653FC_OFF_X, pdata->x_axis_offset))
+ goto err_free_irq;
+ }
+ if (pdata->y_axis_offset) {
+ if (mma->write(mma, MMA8653FC_OFF_Y, pdata->y_axis_offset))
+ goto err_free_irq;
+ }
+ if (pdata->z_axis_offset) {
+ if (mma->write(mma, MMA8653FC_OFF_Z, pdata->z_axis_offset))
+ goto err_free_irq;
+ }
+
+ /* if autosleep, wake on both landscape and motion changes */
+ if (pdata->auto_wake_sleep) {
+ byte = 0;
+ byte |= WAKE_LNDPRT;
+ byte |= WAKE_FF_MT;
+ if (mma->write(mma, MMA8653FC_CTRL_REG3, byte))
+ goto err_free_irq;
+ if (mma->write(mma, MMA8653FC_CTRL_REG2, SLPE))
+ goto err_free_irq;
+ dev_dbg(&client->dev, "auto sleep enabled\n");
+ }
+
+ /* data rates */
+ byte = 0;
+ byte = mma->read(mma, MMA8653FC_CTRL_REG1);
+ if (byte < 0)
+ goto err_free_irq;
+ byte &= ~ODR_MASK;
+ byte |= ODR_DEFAULT;
+ byte &= ~ASLP_RATE_MASK;
+ byte |= ASLP_RATE_DEFAULT;
+ if (mma->write(mma, MMA8653FC_CTRL_REG1, byte))
+ goto err_free_irq;
+
+ /* freefall / motion config */
+ byte = 0;
+ if (pdata->motion_mode) {
+ byte |= FF_MT_CFG_OAE;
+ dev_dbg(&client->dev, "detect motion instead of freefall\n");
+ }
+ byte |= FF_MT_CFG_ELE;
+ if (pdata->int_src_ff_mt_x)
+ byte |= FF_MT_CFG_XEFE;
+ if (pdata->int_src_ff_mt_y)
+ byte |= FF_MT_CFG_YEFE;
+ if (pdata->int_src_ff_mt_z)
+ byte |= FF_MT_CFG_ZEFE;
+ if (mma->write(mma, MMA8653FC_FF_MT_CFG, byte))
+ goto err_free_irq;
+
+ if (pdata->freefall_motion_thr) {
+ if (mma->write(mma, MMA8653FC_FF_MT_THS,
+ pdata->freefall_motion_thr))
+ goto err_free_irq;
+ /* calculate back to mg */
+ dev_dbg(&client->dev, "threshold set to %dmg\n",
+ (63 * pdata->freefall_motion_thr) - 1);
+ }
+
+ byte = mma->read(mma, MMA8653FC_WHO_AM_I);
+ if (byte != MMA8653FC_DEVICE_ID) {
+ dev_err(&client->dev, "wrong device for driver\n");
+ goto err_free_irq;
+ }
+ dev_info(&client->dev,
+ "accelerometer driver loaded. device id %x\n", byte);
+
+ return 0;
+
+ err_free_irq:
+ if (mma->irq)
+ free_irq(mma->irq, mma);
+ err_free_mem:
+ kfree(mma);
+ err_out:
+ return err;
+}
+
+static int mma8653fc_remove(struct i2c_client *client)
+{
+ struct mma8653fc *mma = i2c_get_clientdata(client);
+
+ free_irq(mma->irq, mma);
+ dev_dbg(&client->dev, "unregistered accelerometer\n");
+ kfree(mma);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mma8653fc_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct mma8653fc *mma = i2c_get_clientdata(client);
+
+ __mma8653fc_disable(mma);
+
+ return 0;
+}
+
+static int mma8653fc_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct mma8653fc *mma = i2c_get_clientdata(client);
+
+ __mma8653fc_enable(mma);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mma8653fc_pm_ops, mma8653fc_suspend, mma8653fc_resume);
+#define MMA8653FC_PM_OPS (&mma8653fc_pm_ops)
+#else
+#define MMA8653FC_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id mma8653fc_id[] = {
+ { DRV_NAME, 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mma8653fc_id);
+
+static struct i2c_driver mma8653fc_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = mma8653fc_dt_ids,
+ .pm = MMA8653FC_PM_OPS,
+ },
+ .probe = mma8653fc_i2c_probe,
+ .remove = mma8653fc_remove,
+ .id_table = mma8653fc_id,
+};
+
+module_i2c_driver(mma8653fc_driver);
+
+MODULE_AUTHOR("Martin Kepplinger <martin.kepplinger@...obroma-systems.com");
+MODULE_DESCRIPTION("Freescale's MMA8653FC Three-Axis Accelerometer I2C Driver");
+MODULE_LICENSE("GPL");
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists