| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150323161203.GS24804@x1>
Date: Mon, 23 Mar 2015 16:12:03 +0000
From: Lee Jones <lee.jones@...aro.org>
To: Linus Walleij <linus.walleij@...aro.org>
Cc: Samuel Ortiz <sameo@...ux.intel.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
linux-kernel@...r.kernel.org, linux-input@...r.kernel.org
Subject: Re: [PATCH 1/2] input: touchscreen: stmpe: restrict to device tree
mode
On Mon, 23 Mar 2015, Linus Walleij wrote:
> This strips the STMPE touchscreen input driver to only probe
> and acquire its configuration from the device tree. No in-kernel
> platforms use the static platform data so there is no point in
> keeping it around.
>
> Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
> ---
> Dmitry if you can ACK this I think it is best of it's going in
> through Lee's MFD tree with some other cleanups.
That's find by me.
For my own reference (so I don't have to re-review):
Acked-by: Lee Jones <lee.jones@...aro.org>
> ---
> drivers/input/touchscreen/stmpe-ts.c | 86 +++++++++++++++++++++---------------
> include/linux/mfd/stmpe.h | 43 ------------------
> 2 files changed, 51 insertions(+), 78 deletions(-)
>
> diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
> index 2d5ff86b343f..88a4bc0787c9 100644
> --- a/drivers/input/touchscreen/stmpe-ts.c
> +++ b/drivers/input/touchscreen/stmpe-ts.c
> @@ -63,6 +63,38 @@
> #define STMPE_TS_NAME "stmpe-ts"
> #define XY_MASK 0xfff
>
> +/**
> + * struct stmpe_touch - stmpe811 touch screen controller state
> + * @stmpe: pointer back to STMPE MFD container
> + * @idev: registered input device
> + * @work: a work item used to scan the device
> + * @dev: a pointer back to the MFD cell struct device*
> + * @sample_time: ADC converstion time in number of clock.
> + * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
> + * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
> + * recommended is 4.
> + * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
> + * @ref_sel: ADC reference source
> + * (0 -> internal reference, 1 -> external reference)
> + * @adc_freq: ADC Clock speed
> + * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
> + * @ave_ctrl: Sample average control
> + * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
> + * @touch_det_delay: Touch detect interrupt delay
> + * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
> + * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
> + * recommended is 3
> + * @settling: Panel driver settling time
> + * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
> + * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
> + * recommended is 2
> + * @fraction_z: Length of the fractional part in z
> + * (fraction_z ([0..7]) = Count of the fractional part)
> + * recommended is 7
> + * @i_drive: current limit value of the touchscreen drivers
> + * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
> + *
> + */
> struct stmpe_touch {
> struct stmpe *stmpe;
> struct input_dev *idev;
> @@ -269,44 +301,28 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev,
> {
> struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
> struct device_node *np = pdev->dev.of_node;
> - struct stmpe_ts_platform_data *ts_pdata = NULL;
> + u32 val;
>
> ts->stmpe = stmpe;
>
> - if (stmpe->pdata && stmpe->pdata->ts) {
> - ts_pdata = stmpe->pdata->ts;
> -
> - ts->sample_time = ts_pdata->sample_time;
> - ts->mod_12b = ts_pdata->mod_12b;
> - ts->ref_sel = ts_pdata->ref_sel;
> - ts->adc_freq = ts_pdata->adc_freq;
> - ts->ave_ctrl = ts_pdata->ave_ctrl;
> - ts->touch_det_delay = ts_pdata->touch_det_delay;
> - ts->settling = ts_pdata->settling;
> - ts->fraction_z = ts_pdata->fraction_z;
> - ts->i_drive = ts_pdata->i_drive;
> - } else if (np) {
> - u32 val;
> -
> - if (!of_property_read_u32(np, "st,sample-time", &val))
> - ts->sample_time = val;
> - if (!of_property_read_u32(np, "st,mod-12b", &val))
> - ts->mod_12b = val;
> - if (!of_property_read_u32(np, "st,ref-sel", &val))
> - ts->ref_sel = val;
> - if (!of_property_read_u32(np, "st,adc-freq", &val))
> - ts->adc_freq = val;
> - if (!of_property_read_u32(np, "st,ave-ctrl", &val))
> - ts->ave_ctrl = val;
> - if (!of_property_read_u32(np, "st,touch-det-delay", &val))
> - ts->touch_det_delay = val;
> - if (!of_property_read_u32(np, "st,settling", &val))
> - ts->settling = val;
> - if (!of_property_read_u32(np, "st,fraction-z", &val))
> - ts->fraction_z = val;
> - if (!of_property_read_u32(np, "st,i-drive", &val))
> - ts->i_drive = val;
> - }
> + if (!of_property_read_u32(np, "st,sample-time", &val))
> + ts->sample_time = val;
> + if (!of_property_read_u32(np, "st,mod-12b", &val))
> + ts->mod_12b = val;
> + if (!of_property_read_u32(np, "st,ref-sel", &val))
> + ts->ref_sel = val;
> + if (!of_property_read_u32(np, "st,adc-freq", &val))
> + ts->adc_freq = val;
> + if (!of_property_read_u32(np, "st,ave-ctrl", &val))
> + ts->ave_ctrl = val;
> + if (!of_property_read_u32(np, "st,touch-det-delay", &val))
> + ts->touch_det_delay = val;
> + if (!of_property_read_u32(np, "st,settling", &val))
> + ts->settling = val;
> + if (!of_property_read_u32(np, "st,fraction-z", &val))
> + ts->fraction_z = val;
> + if (!of_property_read_u32(np, "st,i-drive", &val))
> + ts->i_drive = val;
> }
>
> static int stmpe_input_probe(struct platform_device *pdev)
> diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
> index c9d869027300..93e62ae32906 100644
> --- a/include/linux/mfd/stmpe.h
> +++ b/include/linux/mfd/stmpe.h
> @@ -117,46 +117,6 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
>
> #define STMPE_GPIO_NOREQ_811_TOUCH (0xf0)
>
> -/**
> - * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
> - * data
> - * @sample_time: ADC converstion time in number of clock.
> - * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
> - * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
> - * recommended is 4.
> - * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
> - * @ref_sel: ADC reference source
> - * (0 -> internal reference, 1 -> external reference)
> - * @adc_freq: ADC Clock speed
> - * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
> - * @ave_ctrl: Sample average control
> - * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
> - * @touch_det_delay: Touch detect interrupt delay
> - * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
> - * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
> - * recommended is 3
> - * @settling: Panel driver settling time
> - * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
> - * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
> - * recommended is 2
> - * @fraction_z: Length of the fractional part in z
> - * (fraction_z ([0..7]) = Count of the fractional part)
> - * recommended is 7
> - * @i_drive: current limit value of the touchscreen drivers
> - * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
> - *
> - * */
> -struct stmpe_ts_platform_data {
> - u8 sample_time;
> - u8 mod_12b;
> - u8 ref_sel;
> - u8 adc_freq;
> - u8 ave_ctrl;
> - u8 touch_det_delay;
> - u8 settling;
> - u8 fraction_z;
> - u8 i_drive;
> -};
>
> /**
> * struct stmpe_platform_data - STMPE platform data
> @@ -168,7 +128,6 @@ struct stmpe_ts_platform_data {
> * @irq_over_gpio: true if gpio is used to get irq
> * @irq_gpio: gpio number over which irq will be requested (significant only if
> * irq_over_gpio is true)
> - * @ts: touchscreen-specific platform data
> */
> struct stmpe_platform_data {
> int id;
> @@ -178,8 +137,6 @@ struct stmpe_platform_data {
> bool irq_over_gpio;
> int irq_gpio;
> int autosleep_timeout;
> -
> - struct stmpe_ts_platform_data *ts;
> };
>
> #endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists