| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1427217065-17186-2-git-send-email-bjorn.andersson@sonymobile.com>
Date: Tue, 24 Mar 2015 10:11:05 -0700
From: Bjorn Andersson <bjorn.andersson@...ymobile.com>
To: Ohad Ben-Cohen <ohad@...ery.com>
CC: <linux-arm-msm@...r.kernel.org>,
Jeffrey Hugo <jhugo@...eaurora.org>,
Suman Anna <s-anna@...com>, Andy Gross <agross@...eaurora.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v8 2/2] hwspinlock: qcom: Add support for Qualcomm HW Mutex block
Add driver for Qualcomm Hardware Mutex block found in many Qualcomm
SoCs.
Based on initial effort by Kumar Gala <galak@...eaurora.org>
Reviewed-by: Andy Gross <agross@...eaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@...eaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@...ymobile.com>
---
Changes since v7:
- None (DT binding only)
Changes since v6:
- Added missing select of MFD_SYSCON
Changes since v5:
- Dropped all but hwspinlock specific dt bindings
- Hardcoded the number of locks (there is 32)
- Rework to sit ontop of syscon
Changes since v4:
- Aligned with devicetree support in hwlock framework and hence depends on [1]
Changes since v3:
- Reverted back to getting stride from of_match, per Kumars request
Changes since v2:
- MODULE_DEVICE_TABLE
- Changed prefix to qcom
- Cleaned up includes
- Rely on reg and num-locks to figure out stride, instead of of_match data
Changes since v1:
- Added the pm_runtime calls needed to be able to boot a kernel with
pm_runtime and this driver, patch from Courtney.
- Added sfpb-mutex compatible, for re-use of the driver in family A platforms.
- Updated formatting of DT binding documentation, while adding the extra
compatible.
- Dropped Stephen Boyds Reviewed-by due to these changes.
drivers/hwspinlock/Kconfig | 12 +++
drivers/hwspinlock/Makefile | 1 +
drivers/hwspinlock/qcom_hwspinlock.c | 181 +++++++++++++++++++++++++++++++++++
3 files changed, 194 insertions(+)
create mode 100644 drivers/hwspinlock/qcom_hwspinlock.c
diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
index 3612cb5..b5b4f52 100644
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -18,6 +18,18 @@ config HWSPINLOCK_OMAP
If unsure, say N.
+config HWSPINLOCK_QCOM
+ tristate "Qualcomm Hardware Spinlock device"
+ depends on ARCH_QCOM
+ select HWSPINLOCK
+ select MFD_SYSCON
+ help
+ Say y here to support the Qualcomm Hardware Mutex functionality, which
+ provides a synchronisation mechanism for the various processors on
+ the SoC.
+
+ If unsure, say N.
+
config HSEM_U8500
tristate "STE Hardware Semaphore functionality"
depends on ARCH_U8500
diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile
index 93eb64b..68f95d9 100644
--- a/drivers/hwspinlock/Makefile
+++ b/drivers/hwspinlock/Makefile
@@ -4,4 +4,5 @@
obj-$(CONFIG_HWSPINLOCK) += hwspinlock_core.o
obj-$(CONFIG_HWSPINLOCK_OMAP) += omap_hwspinlock.o
+obj-$(CONFIG_HWSPINLOCK_QCOM) += qcom_hwspinlock.o
obj-$(CONFIG_HSEM_U8500) += u8500_hsem.o
diff --git a/drivers/hwspinlock/qcom_hwspinlock.c b/drivers/hwspinlock/qcom_hwspinlock.c
new file mode 100644
index 0000000..93b62e0
--- /dev/null
+++ b/drivers/hwspinlock/qcom_hwspinlock.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, Sony Mobile Communications AB
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/hwspinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include "hwspinlock_internal.h"
+
+#define QCOM_MUTEX_APPS_PROC_ID 1
+#define QCOM_MUTEX_NUM_LOCKS 32
+
+static int qcom_hwspinlock_trylock(struct hwspinlock *lock)
+{
+ struct regmap_field *field = lock->priv;
+ u32 lock_owner;
+ int ret;
+
+ ret = regmap_field_write(field, QCOM_MUTEX_APPS_PROC_ID);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_read(field, &lock_owner);
+ if (ret)
+ return ret;
+
+ return lock_owner == QCOM_MUTEX_APPS_PROC_ID;
+}
+
+static void qcom_hwspinlock_unlock(struct hwspinlock *lock)
+{
+ struct regmap_field *field = lock->priv;
+ u32 lock_owner;
+ int ret;
+
+ ret = regmap_field_read(field, &lock_owner);
+ if (ret) {
+ pr_err("%s: unable to query spinlock owner\n", __func__);
+ return;
+ }
+
+ if (lock_owner != QCOM_MUTEX_APPS_PROC_ID) {
+ pr_err("%s: spinlock not owned by us (actual owner is %d)\n",
+ __func__, lock_owner);
+ }
+
+ ret = regmap_field_write(field, 0);
+ if (ret)
+ pr_err("%s: failed to unlock spinlock\n", __func__);
+}
+
+static const struct hwspinlock_ops qcom_hwspinlock_ops = {
+ .trylock = qcom_hwspinlock_trylock,
+ .unlock = qcom_hwspinlock_unlock,
+};
+
+static const struct of_device_id qcom_hwspinlock_of_match[] = {
+ { .compatible = "qcom,sfpb-mutex" },
+ { .compatible = "qcom,tcsr-mutex" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_hwspinlock_of_match);
+
+static int qcom_hwspinlock_probe(struct platform_device *pdev)
+{
+ struct hwspinlock_device *bank;
+ struct device_node *syscon;
+ struct reg_field field;
+ struct regmap *regmap;
+ size_t array_size;
+ u32 stride;
+ u32 base;
+ int ret;
+ int i;
+
+ syscon = of_parse_phandle(pdev->dev.of_node, "syscon", 0);
+ if (!syscon) {
+ dev_err(&pdev->dev, "no syscon property\n");
+ return -ENODEV;
+ }
+
+ regmap = syscon_node_to_regmap(syscon);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 1, &base);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no offset in syscon\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 2, &stride);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no stride syscon\n");
+ return -EINVAL;
+ }
+
+ array_size = QCOM_MUTEX_NUM_LOCKS * sizeof(struct hwspinlock);
+ bank = devm_kzalloc(&pdev->dev, sizeof(*bank) + array_size, GFP_KERNEL);
+ if (!bank)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, bank);
+
+ for (i = 0; i < QCOM_MUTEX_NUM_LOCKS; i++) {
+ field.reg = base + i * stride;
+ field.lsb = 0;
+ field.msb = 32;
+
+ bank->lock[i].priv = devm_regmap_field_alloc(&pdev->dev,
+ regmap, field);
+ }
+
+ pm_runtime_enable(&pdev->dev);
+
+ ret = hwspin_lock_register(bank, &pdev->dev, &qcom_hwspinlock_ops,
+ 0, QCOM_MUTEX_NUM_LOCKS);
+ if (ret)
+ pm_runtime_disable(&pdev->dev);
+
+ return ret;
+}
+
+static int qcom_hwspinlock_remove(struct platform_device *pdev)
+{
+ struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = hwspin_lock_unregister(bank);
+ if (ret) {
+ dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver qcom_hwspinlock_driver = {
+ .probe = qcom_hwspinlock_probe,
+ .remove = qcom_hwspinlock_remove,
+ .driver = {
+ .name = "qcom_hwspinlock",
+ .of_match_table = qcom_hwspinlock_of_match,
+ },
+};
+
+static int __init qcom_hwspinlock_init(void)
+{
+ return platform_driver_register(&qcom_hwspinlock_driver);
+}
+/* board init code might need to reserve hwspinlocks for predefined purposes */
+postcore_initcall(qcom_hwspinlock_init);
+
+static void __exit qcom_hwspinlock_exit(void)
+{
+ platform_driver_unregister(&qcom_hwspinlock_driver);
+}
+module_exit(qcom_hwspinlock_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hardware spinlock driver for Qualcomm SoCs");
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists