linux-kernel - Re: [PATCH] USB: ftdi_sio: Use jtag quirk for SNAP Connect E10

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAFWqQMT3=819YGv6qGLVjXdveSHBTgfGVVe4zO87_Wrkxwaw8w@mail.gmail.com>
Date:	Wed, 25 Mar 2015 08:51:26 -0500
From:	Doug Goldstein <cardoe@...doe.com>
To:	Johan Hovold <johan@...nel.org>
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	stable <stable@...r.kernel.org>
Subject: Re: [PATCH] USB: ftdi_sio: Use jtag quirk for SNAP Connect E10

On Wed, Mar 25, 2015 at 3:44 AM, Johan Hovold <johan@...nel.org> wrote:
> On Mon, Mar 23, 2015 at 08:34:48PM -0500, Doug Goldstein wrote:
>> This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order
>> to avoid attaching a TTY to the JTAG port as this board is based on the
>> CALAO Systems reference design and needs the same fix up.
>
> Thanks for the patch. Could you please provide the full "lsusb -v"
> output for the device before I apply it?
>
> Thanks,
> Johan

Johan,

This is the "lsusb -v" of the device in question.

Bus 002 Device 114: ID 0403:6010 Future Technology Devices
International, Ltd FT2232C Dual USB-UART/FIFO IC
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0403 Future Technology Devices International, Ltd
  idProduct          0x6010 FT2232C Dual USB-UART/FIFO IC
  bcdDevice            5.00
  iManufacturer           1 Synapse
  iProduct                2 SNAP Connect E10
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           55
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              2 SNAP Connect E10
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              2 SNAP Connect E10
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered)


I'm game for a better way of avoiding having a tty bound to the first
interface. I've been trying to figure out if I can do it via udev as
well but have had no luck there.

-- 
Doug Goldstein
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/