linux-kernel - Re: [PATCH v4 2/3] leds: ktd2692: add device tree bindings for ktd2692

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <55122C2B.6010603@gmail.com>
Date:	Wed, 25 Mar 2015 09:01:55 +0530
From:	Varka Bhadram <varkabhadram@...il.com>
To:	Ingi Kim <ingi2.kim@...sung.com>, cooloney@...il.com,
	rpurdie@...ys.net, robh+dt@...nel.org, pawel.moll@....com,
	mark.rutland@....com, ijc+devicetree@...lion.org.uk,
	galak@...eaurora.org
CC:	sakari.ailus@....fi, j.anaszewski@...sung.com,
	sw0312.kim@...sung.com, cw00.choi@...sung.com,
	jh80.chung@...sung.com, ideal.song@...sung.com,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-leds@...r.kernel.org
Subject: Re: [PATCH v4 2/3] leds: ktd2692: add device tree bindings for ktd2692

On 03/25/2015 07:00 AM, Ingi Kim wrote:
> This patch adds the device tree bindings for ktd2692 flash LEDs.
> Add optional properties 'flash-timeout-us' to control flash timeout
> and 'vin-supply' for flash-led regulator
>
> Signed-off-by: Ingi Kim <ingi2.kim@...sung.com>
> ---
>   .../devicetree/bindings/leds/leds-ktd2692.txt      | 33 ++++++++++++++++++++++
>   1 file changed, 33 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
> new file mode 100644
> index 0000000..f78512f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
> @@ -0,0 +1,33 @@
> +* Kinetic Technologies - KTD2692 Flash LED Driver
> +
> +KTD2692 is the ideal power solution for high-power flash LEDs.
> +It uses ExpressWire single-wire programming for maximum flexibility.
> +
> +The ExpressWire interface through CTRL pin can control LED on/off and
> +enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
> +Flash timeout, LVP(low voltage protection).
> +
> +Also, When the AUX pin is pulled high while CTRL pin is high,
> +LED current will be ramped up to the flash-mode current level.
> +
> +Required properties:
> +	- compatible: "kinetic,ktd2692"
> +	- ctrl-gpio, aux-gpio : gpio pins in order control ktd2692 flash led.
> +		There is an internal 300kOhm pull-down resistor at each pin
> +	- vin-supply : "vin" LED supply (2.7V to 5.5V)
> +		See Documentation/devicetree/bindings/regulator/regulator.txt
> +

Above bindings are not that readable to me. Remove the tab spaces before properties.

> +Optional property:
> +	- flash-timeout-us : Maximum flash timeout in microseconds.
> +			flash timeout ranges from 0 to 1835000us and
> +			default is 1049000us.
> +
> +Example:
> +
> +flash-led {
> +	compatible = "kinetic,ktd2692";
> +	ctrl-gpio = <&gpc0 1 0>;
> +	aux-gpio = <&gpc0 2 0>;
> +	flash-timeout-us = <1835000>;
> +	vin-supply = <&vbat>;
> +};


-- 
Varka Bhadram

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/