linux-kernel - [PATCH 6/6] mvneta: port marvell's official in-band status enabling procedure

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <55155DE4.5060701@list.ru>
Date:	Fri, 27 Mar 2015 16:40:52 +0300
From:	Stas Sergeev <stsp@...t.ru>
To:	netdev@...r.kernel.org
CC:	Linux kernel <linux-kernel@...r.kernel.org>,
	Stas Sergeev <stsp@...rs.sourceforge.net>,
	Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
Subject: [PATCH 6/6] mvneta: port marvell's official in-band status enabling
 procedure


This is a back-port of official marvell's patch.
It changes nothing visible for me but looks reasonable.
Hope people with access to marvell's specs can review and
justify this patch better.

CC: Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
CC: netdev@...r.kernel.org
CC: linux-kernel@...r.kernel.org

Signed-off-by: Stas Sergeev <stsp@...rs.sourceforge.net>
---
 drivers/net/ethernet/marvell/mvneta.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 2d1c689..5dc7416 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -100,6 +100,8 @@
 #define MVNETA_TXQ_CMD                           0x2448
 #define      MVNETA_TXQ_DISABLE_SHIFT            8
 #define      MVNETA_TXQ_ENABLE_MASK              0x000000ff
+#define MVNETA_GMAC_CLOCK_DIVIDER                0x24f4
+#define      MVNETA_GMAC_1MS_CLOCK_ENABLE        BIT(31)
 #define MVNETA_ACC_MODE                          0x2500
 #define MVNETA_CPU_MAP(cpu)                      (0x2540 + ((cpu) << 2))
 #define      MVNETA_CPU_RXQ_ACCESS_ALL_MASK      0x000000ff
@@ -166,6 +168,7 @@
 #define      MVNETA_GMAC_MAX_RX_SIZE_MASK        0x7ffc
 #define      MVNETA_GMAC0_PORT_ENABLE            BIT(0)
 #define MVNETA_GMAC_CTRL_2                       0x2c08
+#define      MVNETA_GMAC2_INBAND_AN_ENABLE       BIT(0)
 #define      MVNETA_GMAC2_PCS_ENABLE             BIT(3)
 #define      MVNETA_GMAC2_PORT_RGMII             BIT(4)
 #define      MVNETA_GMAC2_PORT_RESET             BIT(6)
@@ -185,6 +188,7 @@
 #define      MVNETA_GMAC_CONFIG_MII_SPEED        BIT(5)
 #define      MVNETA_GMAC_CONFIG_GMII_SPEED       BIT(6)
 #define      MVNETA_GMAC_AN_SPEED_EN             BIT(7)
+#define      MVNETA_GMAC_AN_FLOW_CTRL_EN         BIT(11)
 #define      MVNETA_GMAC_CONFIG_FULL_DUPLEX      BIT(12)
 #define      MVNETA_GMAC_AN_DUPLEX_EN            BIT(13)
 #define MVNETA_MIB_COUNTERS_BASE                 0x3080
@@ -1000,11 +1004,15 @@ static void mvneta_defaults_set(struct mvneta_port *pp)
 	if (pp->inband_status) {
 		val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
 		val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
-			 MVNETA_GMAC_FORCE_LINK_DOWN);
+			 MVNETA_GMAC_FORCE_LINK_DOWN |
+			 MVNETA_GMAC_AN_FLOW_CTRL_EN);
 		val |= MVNETA_GMAC_INBAND_AN_ENABLE |
 		       MVNETA_GMAC_AN_SPEED_EN |
 		       MVNETA_GMAC_AN_DUPLEX_EN;
 		mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+		val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+		val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
+		mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
 	}

 	mvneta_set_ucast_table(pp, -1);
@@ -2977,6 +2985,9 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
 		return -EINVAL;
 	}

+	if (pp->inband_status)
+		ctrl |= MVNETA_GMAC2_INBAND_AN_ENABLE;
+
 	/* Cancel Port Reset */
 	ctrl &= ~MVNETA_GMAC2_PORT_RESET;
 	mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);
-- 
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/