linux-kernel - [PATCH v5 2/3] leds: ktd2692: add device tree bindings for ktd2692

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-id: <1427860708-32559-3-git-send-email-ingi2.kim@samsung.com>
Date:	Wed, 01 Apr 2015 12:58:27 +0900
From:	Ingi Kim <ingi2.kim@...sung.com>
To:	cooloney@...il.com, rpurdie@...ys.net, robh+dt@...nel.org,
	pawel.moll@....com, mark.rutland@....com,
	ijc+devicetree@...lion.org.uk, galak@...eaurora.org
Cc:	sakari.ailus@....fi, j.anaszewski@...sung.com,
	varkabhadram@...il.com, sw0312.kim@...sung.com,
	cw00.choi@...sung.com, jh80.chung@...sung.com,
	ideal.song@...sung.com, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-leds@...r.kernel.org,
	Ingi Kim <ingi2.kim@...sung.com>
Subject: [PATCH v5 2/3] leds: ktd2692: add device tree bindings for ktd2692

This patch adds the device tree bindings for ktd2692 flash LEDs.
Add optional properties 'flash-timeout-us' to control flash timeout
and 'vin-supply' for flash-led regulator

Signed-off-by: Ingi Kim <ingi2.kim@...sung.com>
---
 .../devicetree/bindings/leds/leds-ktd2692.txt      | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
new file mode 100644
index 0000000..3f121ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
@@ -0,0 +1,32 @@
+* Kinetic Technologies - KTD2692 Flash LED Driver
+
+KTD2692 is the ideal power solution for high-power flash LEDs.
+It uses ExpressWire single-wire programming for maximum flexibility.
+
+The ExpressWire interface through CTRL pin can control LED on/off and
+enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+Flash timeout, LVP(low voltage protection).
+
+Also, When the AUX pin is pulled high while CTRL pin is high,
+LED current will be ramped up to the flash-mode current level.
+
+Required properties:
+- compatible: "kinetic,ktd2692"
+- ctrl-gpio : gpio pin in order control CTRL pin
+- aux-gpio : gpio pin in order control AUX pin
+- vin-supply : "vin" LED supply (2.7V to 5.5V)
+  See Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional property:
+- flash-timeout-us : Maximum flash timeout in microseconds.
+  flash timeout ranges from 0 to 1835000us and default is 1049000us.
+
+Example:
+
+flash-led {
+	compatible = "kinetic,ktd2692";
+	ctrl-gpio = <&gpc0 1 0>;
+	aux-gpio = <&gpc0 2 0>;
+	flash-timeout-us = <1835000>;
+	vin-supply = <&vbat>;
+};
-- 
2.0.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/