linux-kernel - [PATCH 1/4] ARM: dts: Add binding for Broadcom MSPI driver.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1428002603-21892-2-git-send-email-jonathar@broadcom.com>
Date:	Thu, 2 Apr 2015 12:23:20 -0700
From:	Jonathan Richardson <jonathar@...adcom.com>
To:	Mark Brown <broonie@...nel.org>, Dmitry Torokhov <dtor@...gle.com>,
	Anatol Pomazau <anatol@...gle.com>
CC:	Jonathan Richardson <jonathar@...adcom.com>,
	Scott Branden <sbranden@...adcom.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	<linux-kernel@...r.kernel.org>, <linux-spi@...r.kernel.org>,
	bcm-kernel-feedback-list <bcm-kernel-feedback-list@...adcom.com>,
	<devicetree@...r.kernel.org>, Rafal Milecki <zajec5@...il.com>
Subject: [PATCH 1/4] ARM: dts: Add binding for Broadcom MSPI driver.


Signed-off-by: Jonathan Richardson <jonathar@...adcom.com>
---
 .../devicetree/bindings/spi/brcm,mspi-spi.txt      |   38 ++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/brcm,mspi-spi.txt

diff --git a/Documentation/devicetree/bindings/spi/brcm,mspi-spi.txt b/Documentation/devicetree/bindings/spi/brcm,mspi-spi.txt
new file mode 100644
index 0000000..16164e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,mspi-spi.txt
@@ -0,0 +1,38 @@
+Broadcom MSPI controller
+
+Required properties:
+- compatible: Must be either "brcm,mspi" or "brcm,bcma-mspi". Use
+  "brcm,bcma-mspi" for controllers on a bcma bus and "brcm,mspi" otherwise.
+
+- reg:  Physical base address and length of the controller's registers.
+
+- interrupts: The interrupt id for the controller.
+
+- #address-cells: should be 1.
+
+- #size-cells: should be 0.
+
+Optional properties:
+- clocks: The MSPI reference clock. If not provided then it is assumed a clock
+  is enabled by default and no control of clock-frequency (see below) is
+  possible.
+
+- clock-names: The name of the reference clock.
+
+- clock-frequency: Desired frequency of the clock. This will set the serial
+  clock baud rate (SPBR) based on the reference clock frequency. The frequency
+  of the SPBR is mspi_clk / (2 * SPBR) where SPBR is a value between 1-255
+  determined by the desired 'clock-frequency'. If not provided then the default
+  baud rate of the controller is used.
+
+Example:
+
+mspi@...47000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "brcm,mspi";
+	reg = <0x18047000 0x1000>;
+	clocks = <&axi41_clk>;
+	clock-names = "mspi_clk";
+	clock-frequency = <12500000>;
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/