| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <B077351396223C4F8FE8C4C13672A9CA609795F3@mtkmbs33n1>
Date: Fri, 3 Apr 2015 07:22:45 +0000
From: Chaotian Jing (井朝天)
<Chaotian.Jing@...iatek.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
CC: Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Chris Ball <chris@...ntf.net>,
Mark Rutland <mark.rutland@....com>,
JamesJJ Liao (廖建智)
<jamesjj.liao@...iatek.com>,
srv_heupstream <srv_heupstream@...iatek.com>,
Arnd Bergmann <arnd@...db.de>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
HONGZHOU Yang <hongzhou.yang@...iatek.com>,
Catalin Marinas <catalin.marinas@....com>,
linux-mmc <linux-mmc@...r.kernel.org>,
Will Deacon <will.deacon@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
Sascha Hauer <kernel@...gutronix.de>,
Yingjoe Chen (陳英洲)
<Yingjoe.Chen@...iatek.com>,
Eddie Huang (黃智傑)
<eddie.huang@...iatek.com>,
Bin Zhang (章斌) <bin.zhang@...iatek.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>
Subject: 答复: [PATCH v2 2/5] mmc: mediatek: Add Mediatek MMC driver
Dear Ulf,
Thanks for your review!
Please help to check my comment.
> -----邮件原件-----
> 发件人: Ulf Hansson [mailto:ulf.hansson@...aro.org]
> 发送时间: 2015年3月31日 20:23
> 收件人: Chaotian Jing (井朝天)
> 抄送: Rob Herring; Matthias Brugger; Chris Ball; Mark Rutland; JamesJJ Liao
> (廖建智); srv_heupstream; Arnd Bergmann; devicetree@...r.kernel.org;
> HONGZHOU Yang; Catalin Marinas; linux-mmc; Will Deacon;
> linux-kernel@...r.kernel.org; linux-gpio@...r.kernel.org; Sascha Hauer;
> Yingjoe Chen (陳英洲); Eddie Huang (黃智傑); Bin Zhang (章斌);
> linux-arm-kernel@...ts.infradead.org; linux-mediatek@...ts.infradead.org
> 主题: Re: [PATCH v2 2/5] mmc: mediatek: Add Mediatek MMC driver
>
> On 17 March 2015 at 04:13, Chaotian Jing <chaotian.jing@...iatek.com>
> wrote:
> > Add Mediatek MMC driver code
>
> Would be nice to get simple overview of what features the
> driver/controller supports. Please add that to the commit message.
>
Ok, will add it at next revision.
> >
> > Signed-off-by: Chaotian Jing <chaotian.jing@...iatek.com>
> > ---
> > drivers/mmc/host/Kconfig | 8 +
> > drivers/mmc/host/Makefile | 1 +
> > drivers/mmc/host/mtk-sd.c | 1412
> +++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 1421 insertions(+)
> > create mode 100644 drivers/mmc/host/mtk-sd.c
> >
> > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> > index 61ac63a..8b64377 100644
> > --- a/drivers/mmc/host/Kconfig
> > +++ b/drivers/mmc/host/Kconfig
> > @@ -768,3 +768,11 @@ config MMC_TOSHIBA_PCI
> > tristate "Toshiba Type A SD/MMC Card Interface Driver"
> > depends on PCI
> > help
> > +
> > +config MMC_MTK
> > + tristate "MediaTek SD/MMC Card Interface support"
> > + help
> > + This selects the MediaTek(R) Secure digital and Multimedia card
> Interface.
> > + If you have a machine with a integrated SD/MMC card reader,
> say Y or M here.
> > + This is needed if support for any SD/SDIO/MMC devices is
> required.
> > + If unsure, say N.
> > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> > index 6a7cfe0..161b3e4 100644
> > --- a/drivers/mmc/host/Makefile
> > +++ b/drivers/mmc/host/Makefile
> > @@ -20,6 +20,7 @@ obj-$(CONFIG_MMC_SDHCI_F_SDH30) +=
> sdhci_f_sdh30.o
> > obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
> > obj-$(CONFIG_MMC_WBSD) += wbsd.o
> > obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
> > +obj-$(CONFIG_MMC_MTK) += mtk-sd.o
> > obj-$(CONFIG_MMC_OMAP) += omap.o
> > obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
> > obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
> > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> > new file mode 100644
> > index 0000000..86c999b
> > --- /dev/null
> > +++ b/drivers/mmc/host/mtk-sd.c
> > @@ -0,0 +1,1412 @@
> > +/*
> > + * Copyright (c) 2014-2015 MediaTek Inc.
> > + * Author: Chaotian.Jing <chaotian.jing@...iatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/ioport.h>
> > +#include <linux/irq.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/spinlock.h>
> > +
> > +#include <linux/mmc/card.h>
> > +#include <linux/mmc/core.h>
> > +#include <linux/mmc/host.h>
> > +#include <linux/mmc/mmc.h>
> > +#include <linux/mmc/sd.h>
> > +#include <linux/mmc/sdio.h>
> > +
> > +#define MAX_GPD_NUM (1 + 1) /* one null gpd */
> > +#define MAX_BD_NUM 1024
> > +#define MAX_BD_PER_GPD MAX_BD_NUM
> > +
> > +/*--------------------------------------------------------------------------*/
> > +/* Common Definition
> */
> > +/*--------------------------------------------------------------------------*/
> > +#define MSDC_MS 0
> > +#define MSDC_SDMMC 1
>
> Please convert to hex values.
Ok, will fix at next revision.
>
> > +
> > +#define MSDC_BUS_1BITS 0
> > +#define MSDC_BUS_4BITS 1
> > +#define MSDC_BUS_8BITS 2
>
> Please convert to hex values.
>
Ok, will fix at next revision.
> > +
> > +#define MSDC_BURST_8B 3
> > +#define MSDC_BURST_16B 4
> > +#define MSDC_BURST_32B 5
> > +#define MSDC_BURST_64B 6
>
> I don't find the first three being used, should we remove them?
>
> Also, I think converting them to hex values make sense.
>
Ok, will remove them and convert it to hex value
>
> > +
> > +/*--------------------------------------------------------------------------*/
> > +/* Register Offset
> */
> > +/*--------------------------------------------------------------------------*/
> > +#define MSDC_CFG 0x0
> > +#define MSDC_IOCON 0x04
> > +#define MSDC_PS 0x08
> > +#define MSDC_INT 0x0c
> > +#define MSDC_INTEN 0x10
> > +#define MSDC_FIFOCS 0x14
> > +#define SDC_CFG 0x30
> > +#define SDC_CMD 0x34
> > +#define SDC_ARG 0x38
> > +#define SDC_STS 0x3c
> > +#define SDC_RESP0 0x40
> > +#define SDC_RESP1 0x44
> > +#define SDC_RESP2 0x48
> > +#define SDC_RESP3 0x4c
> > +#define SDC_BLK_NUM 0x50
> > +#define SDC_ACMD_RESP 0x80
> > +#define MSDC_DMA_SA 0x90
> > +#define MSDC_DMA_CTRL 0x98
> > +#define MSDC_DMA_CFG 0x9c
> > +#define MSDC_PATCH_BIT 0xb0
> > +#define MSDC_PATCH_BIT1 0xb4
> > +#define MSDC_PAD_TUNE 0xec
> > +
> > +/*--------------------------------------------------------------------------*/
> > +/* Register Mask
> */
> > +/*--------------------------------------------------------------------------*/
> > +
> > +/* MSDC_CFG mask */
> > +#define MSDC_CFG_MODE (1 << 0) /* RW */
> > +#define MSDC_CFG_CKPDN (1 << 1) /* RW */
> > +#define MSDC_CFG_RST (1 << 2) /* RW */
> > +#define MSDC_CFG_PIO (1 << 3) /* RW */
> > +#define MSDC_CFG_CKDRVEN (1 << 4) /* RW */
> > +#define MSDC_CFG_BV18SDT (1 << 5) /* RW */
> > +#define MSDC_CFG_BV18PSS (1 << 6) /* R */
> > +#define MSDC_CFG_CKSTB (1 << 7) /* R */
> > +#define MSDC_CFG_CKDIV (0xff << 8) /* RW */
> > +#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
> > +
> > +/* MSDC_IOCON mask */
> > +#define MSDC_IOCON_SDR104CKS (1 << 0) /* RW */
> > +#define MSDC_IOCON_RSPL (1 << 1) /* RW */
> > +#define MSDC_IOCON_DSPL (1 << 2) /* RW */
> > +#define MSDC_IOCON_DDLSEL (1 << 3) /* RW */
> > +#define MSDC_IOCON_DDR50CKD (1 << 4) /* RW */
> > +#define MSDC_IOCON_DSPLSEL (1 << 5) /* RW */
> > +#define MSDC_IOCON_W_DSPL (1 << 8) /* RW */
> > +#define MSDC_IOCON_D0SPL (1 << 16) /* RW */
> > +#define MSDC_IOCON_D1SPL (1 << 17) /* RW */
> > +#define MSDC_IOCON_D2SPL (1 << 18) /* RW */
> > +#define MSDC_IOCON_D3SPL (1 << 19) /* RW */
> > +#define MSDC_IOCON_D4SPL (1 << 20) /* RW */
> > +#define MSDC_IOCON_D5SPL (1 << 21) /* RW */
> > +#define MSDC_IOCON_D6SPL (1 << 22) /* RW */
> > +#define MSDC_IOCON_D7SPL (1 << 23) /* RW */
> > +#define MSDC_IOCON_RISCSZ (0x3 << 24) /* RW */
> > +
> > +/* MSDC_PS mask */
> > +#define MSDC_PS_CDEN (1 << 0) /* RW */
> > +#define MSDC_PS_CDSTS (1 << 1) /* R */
> > +#define MSDC_PS_CDDEBOUNCE (0xf << 12) /* RW */
> > +#define MSDC_PS_DAT (0xff << 16) /* R */
> > +#define MSDC_PS_CMD (1 << 24) /* R */
> > +#define MSDC_PS_WP (1 << 31) /* R */
> > +
> > +/* MSDC_INT mask */
> > +#define MSDC_INT_MMCIRQ (1 << 0) /* W1C */
> > +#define MSDC_INT_CDSC (1 << 1) /* W1C */
> > +#define MSDC_INT_ACMDRDY (1 << 3) /* W1C */
> > +#define MSDC_INT_ACMDTMO (1 << 4) /* W1C */
> > +#define MSDC_INT_ACMDCRCERR (1 << 5) /* W1C */
> > +#define MSDC_INT_DMAQ_EMPTY (1 << 6) /* W1C */
> > +#define MSDC_INT_SDIOIRQ (1 << 7) /* W1C */
> > +#define MSDC_INT_CMDRDY (1 << 8) /* W1C */
> > +#define MSDC_INT_CMDTMO (1 << 9) /* W1C */
> > +#define MSDC_INT_RSPCRCERR (1 << 10) /* W1C */
> > +#define MSDC_INT_CSTA (1 << 11) /* R */
> > +#define MSDC_INT_XFER_COMPL (1 << 12) /* W1C */
> > +#define MSDC_INT_DXFER_DONE (1 << 13) /* W1C */
> > +#define MSDC_INT_DATTMO (1 << 14) /* W1C */
> > +#define MSDC_INT_DATCRCERR (1 << 15) /* W1C */
> > +#define MSDC_INT_ACMD19_DONE (1 << 16) /* W1C */
> > +#define MSDC_INT_DMA_BDCSERR (1 << 17) /* W1C */
> > +#define MSDC_INT_DMA_GPDCSERR (1 << 18) /* W1C */
> > +#define MSDC_INT_DMA_PROTECT (1 << 19) /* W1C */
> > +
> > +/* MSDC_INTEN mask */
> > +#define MSDC_INTEN_MMCIRQ (1 << 0) /* RW */
> > +#define MSDC_INTEN_CDSC (1 << 1) /* RW */
> > +#define MSDC_INTEN_ACMDRDY (1 << 3) /* RW */
> > +#define MSDC_INTEN_ACMDTMO (1 << 4) /* RW */
> > +#define MSDC_INTEN_ACMDCRCERR (1 << 5) /* RW */
> > +#define MSDC_INTEN_DMAQ_EMPTY (1 << 6) /* RW */
> > +#define MSDC_INTEN_SDIOIRQ (1 << 7) /* RW */
> > +#define MSDC_INTEN_CMDRDY (1 << 8) /* RW */
> > +#define MSDC_INTEN_CMDTMO (1 << 9) /* RW */
> > +#define MSDC_INTEN_RSPCRCERR (1 << 10) /* RW */
> > +#define MSDC_INTEN_CSTA (1 << 11) /* RW */
> > +#define MSDC_INTEN_XFER_COMPL (1 << 12) /* RW */
> > +#define MSDC_INTEN_DXFER_DONE (1 << 13) /* RW */
> > +#define MSDC_INTEN_DATTMO (1 << 14) /* RW */
> > +#define MSDC_INTEN_DATCRCERR (1 << 15) /* RW */
> > +#define MSDC_INTEN_ACMD19_DONE (1 << 16) /* RW */
> > +#define MSDC_INTEN_DMA_BDCSERR (1 << 17) /* RW */
> > +#define MSDC_INTEN_DMA_GPDCSERR (1 << 18) /* RW */
> > +#define MSDC_INTEN_DMA_PROTECT (1 << 19) /* RW */
> > +
> > +/* MSDC_FIFOCS mask */
> > +#define MSDC_FIFOCS_RXCNT (0xff << 0) /* R */
> > +#define MSDC_FIFOCS_TXCNT (0xff << 16) /* R */
> > +#define MSDC_FIFOCS_CLR (1 << 31) /* RW */
> > +
> > +/* SDC_CFG mask */
> > +#define SDC_CFG_SDIOINTWKUP (1 << 0) /* RW */
> > +#define SDC_CFG_INSWKUP (1 << 1) /* RW */
> > +#define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
> > +#define SDC_CFG_SDIO (1 << 19) /* RW */
> > +#define SDC_CFG_SDIOIDE (1 << 20) /* RW */
> > +#define SDC_CFG_INTATGAP (1 << 21) /* RW */
> > +#define SDC_CFG_DTOC (0xff << 24) /* RW */
> > +
> > +/* SDC_STS mask */
> > +#define SDC_STS_SDCBUSY (1 << 0) /* RW */
> > +#define SDC_STS_CMDBUSY (1 << 1) /* RW */
> > +#define SDC_STS_SWR_COMPL (1 << 31) /* RW */
> > +
> > +/* MSDC_DMA_CTRL mask */
> > +#define MSDC_DMA_CTRL_START (1 << 0) /* W */
> > +#define MSDC_DMA_CTRL_STOP (1 << 1) /* W */
> > +#define MSDC_DMA_CTRL_RESUME (1 << 2) /* W */
> > +#define MSDC_DMA_CTRL_MODE (1 << 8) /* RW */
> > +#define MSDC_DMA_CTRL_LASTBUF (1 << 10) /* RW */
> > +#define MSDC_DMA_CTRL_BRUSTSZ (0x7 << 12) /* RW */
> > +
> > +/* MSDC_DMA_CFG mask */
> > +#define MSDC_DMA_CFG_STS (1 << 0) /* R */
> > +#define MSDC_DMA_CFG_DECSEN (1 << 1) /* RW */
> > +#define MSDC_DMA_CFG_AHBHPROT2 (0x2 << 8) /* RW */
> > +#define MSDC_DMA_CFG_ACTIVEEN (0x2 << 12) /* RW */
> > +#define MSDC_DMA_CFG_CS12B16B (1 << 16) /* RW */
> > +
> > +/* MSDC_PATCH_BIT mask */
> > +#define MSDC_PATCH_BIT_ODDSUPP (1 << 1) /* RW */
> > +#define MSDC_INT_DAT_LATCH_CK_SEL (0x7 << 7)
> > +#define MSDC_CKGEN_MSDC_DLY_SEL (0x1f << 10)
> > +#define MSDC_PATCH_BIT_IODSSEL (1 << 16) /* RW */
> > +#define MSDC_PATCH_BIT_IOINTSEL (1 << 17) /* RW */
> > +#define MSDC_PATCH_BIT_BUSYDLY (0xf << 18) /* RW */
> > +#define MSDC_PATCH_BIT_WDOD (0xf << 22) /* RW */
> > +#define MSDC_PATCH_BIT_IDRTSEL (1 << 26) /* RW */
> > +#define MSDC_PATCH_BIT_CMDFSEL (1 << 27) /* RW */
> > +#define MSDC_PATCH_BIT_INTDLSEL (1 << 28) /* RW */
> > +#define MSDC_PATCH_BIT_SPCPUSH (1 << 29) /* RW */
> > +#define MSDC_PATCH_BIT_DECRCTMO (1 << 30) /* RW */
> > +
> > +#define REQ_CMD_EIO (1 << 0)
> > +#define REQ_CMD_TMO (1 << 1)
> > +#define REQ_DAT_ERR (1 << 2)
> > +#define REQ_STOP_EIO (1 << 3)
> > +#define REQ_STOP_TMO (1 << 4)
> > +#define REQ_CMD_BUSY (1 << 5)
> > +
> > +#define MSDC_PREPARE_FLAG (1 << 0)
> > +#define MSDC_ASYNC_FLAG (1 << 1)
> > +#define MSDC_MMAP_FLAG (1 << 2)
> > +
> > +#define HOST_MAX_BLKSZ 2048
> > +#define MSDC_OCR_AVAIL (MMC_VDD_28_29 | MMC_VDD_29_30 \
> > + | MMC_VDD_30_31 | MMC_VDD_31_32 |
> MMC_VDD_32_33)
>
> Both these aren't used. Remove please.
>
Ok, will remove it at next revision.
> > +
> > +#define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */
> > +#define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */
> > +
> > +/*--------------------------------------------------------------------------*/
> > +/* Descriptor Structure
> */
> > +/*--------------------------------------------------------------------------*/
> > +struct mt_gpdma_desc {
> > + u32 first_u32;
> > +#define GPDMA_DESC_HWO (1 << 0)
> > +#define GPDMA_DESC_BDP (1 << 1)
> > +#define GPDMA_DESC_CHECKSUM (0xff << 8) /* bit8 ~ bit15 */
> > +#define GPDMA_DESC_INT (1 << 16)
> > + u32 next;
> > + u32 ptr;
> > + u32 second_u32;
> > +#define GPDMA_DESC_BUFLEN (0xffff) /* bit0 ~ bit15 */
> > +#define GPDMA_DESC_EXTLEN (0xff << 16) /* bit16 ~ bit23 */
> > + u32 arg;
> > + u32 blknum;
> > + u32 cmd;
> > +};
> > +
> > +struct mt_bdma_desc {
> > + u32 first_u32;
> > +#define BDMA_DESC_EOL (1 << 0)
> > +#define BDMA_DESC_CHECKSUM (0xff << 8) /* bit8 ~ bit15 */
> > +#define BDMA_DESC_BLKPAD (1 << 17)
> > +#define BDMA_DESC_DWPAD (1 << 18)
> > + u32 next;
> > + u32 ptr;
> > + u32 second_u32;
> > +#define BDMA_DESC_BUFLEN (0xffff) /* bit0 ~ bit15 */
> > +};
> > +
> > +struct msdc_dma {
> > + struct scatterlist *sg; /* I/O scatter list */
> > + struct mt_gpdma_desc *gpd; /* pointer to gpd
> array */
> > + struct mt_bdma_desc *bd; /* pointer to bd
> array */
> > + dma_addr_t gpd_addr; /* the physical address of gpd array */
> > + dma_addr_t bd_addr; /* the physical address of bd array */
> > +};
>
> This looks weird from DMA perspective. Can you elaborate on why you
> can't use the dmaengine API?
>
The gpd and bd structure are determined by the MSDC hw, and, the DMA controller is a part of the MSDC hw, different with the chain dma implemented by the kernel.
> > +
> > +struct msdc_host {
> > + struct device *dev;
> > + struct mmc_host *mmc; /* mmc structure */
> > + int cmd_rsp;
> > +
> > + spinlock_t lock;
> > + struct mmc_request *mrq;
> > + struct mmc_command *cmd;
> > + struct mmc_data *data;
> > + int error;
> > +
> > + void __iomem *base; /* host base address */
> > +
> > + struct msdc_dma dma; /* dma channel */
> > +
> > + u32 timeout_ns; /* data timeout ns */
> > + u32 timeout_clks; /* data timeout clks */
> > +
> > + struct pinctrl *pinctrl;
> > + struct pinctrl_state *pins_default;
> > + struct pinctrl_state *pins_uhs;
> > + struct delayed_work req_timeout;
> > + int irq; /* host interrupt */
> > +
> > + struct clk *src_clk; /* msdc source clock */
> > + u32 mclk; /* mmc subsystem clock */
> > + u32 hclk; /* host clock speed */
> > + u32 sclk; /* SD/MS clock speed */
> > + bool ddr;
> > +};
> > +
> > +static void sdr_set_bits(void __iomem *reg, u32 bs)
> > +{
> > + u32 val = readl(reg);
> > +
> > + val |= bs;
> > + writel(val, reg);
> > +}
> > +
> > +static void sdr_clr_bits(void __iomem *reg, u32 bs)
> > +{
> > + u32 val = readl(reg);
> > +
> > + val &= ~(u32)bs;
> > + writel(val, reg);
> > +}
> > +
> > +static void sdr_set_field(void __iomem *reg, u32 field, u32 val)
> > +{
> > + unsigned int tv = readl(reg);
> > +
> > + tv &= ~field;
> > + tv |= ((val) << (ffs((unsigned int)field) - 1));
> > + writel(tv, reg);
> > +}
>
> A common thought for all the three above functions:
>
> Have you considered using a cache variable for those registers that
> often gets updated? In that way you would have to read the register
> value every time when you want to write to it. It should improve
> performance a bit.
>
These register can be modified by the MSDC hw, cannot cache it.
> > +
> > +static void sdr_get_field(void __iomem *reg, u32 field, u32 *val)
> > +{
> > + unsigned int tv = readl(reg);
> > +
> > + *val = ((tv & field) >> (ffs((unsigned int)field) - 1));
> > +}
> > +
> > +static void msdc_reset_hw(struct msdc_host *host)
> > +{
> > + u32 val;
> > +
> > + sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST);
> > + while (readl(host->base + MSDC_CFG) & MSDC_CFG_RST)
> > + cpu_relax();
> > +
> > + sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR);
> > + while (readl(host->base + MSDC_FIFOCS) & MSDC_FIFOCS_CLR)
> > + cpu_relax();
> > +
> > + val = readl(host->base + MSDC_INT);
> > + writel(val, host->base + MSDC_INT);
> > +}
> > +
> > +static void msdc_cmd_next(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd);
>
> Please investigate whether you can move around the code to prevent
> this static declaration of the function.
>
It is hard to do it, because the first cmd may be CMD23, and do the next is send the mrq->cmd, so, there is a loop here, at least on method need do static declaration,
> > +
> > +static inline u32 msdc_data_ints_mask(struct msdc_host *host)
> > +{
> > + u32 wints =
> > + /* data xfer */
> > + MSDC_INTEN_XFER_COMPL |
> > + MSDC_INTEN_DATTMO |
> > + MSDC_INTEN_DATCRCERR |
> > + /* DMA events */
> > + MSDC_INTEN_DMA_BDCSERR |
> > + MSDC_INTEN_DMA_GPDCSERR |
> > + MSDC_INTEN_DMA_PROTECT;
> > +
> > + return wints;
> > +}
>
> This should be a static variable instead of a function.
>
Ok, will fix at next revision.
> > +
> > +static u8 msdc_dma_calcs(u8 *buf, u32 len)
> > +{
> > + u32 i, sum = 0;
> > +
> > + for (i = 0; i < len; i++)
> > + sum += buf[i];
> > + return 0xff - (u8) sum;
> > +}
> > +
> > +static inline void msdc_dma_setup(struct msdc_host *host, struct
> msdc_dma *dma,
> > + struct mmc_data *data)
> > +{
> > + u32 sglen, j;
> > + u32 dma_address, dma_len;
> > + struct scatterlist *sg;
> > + struct mt_gpdma_desc *gpd;
> > + struct mt_bdma_desc *bd;
> > +
> > + sglen = data->sg_len;
> > + sg = data->sg;
> > +
> > + gpd = dma->gpd;
> > + bd = dma->bd;
> > +
> > + /* modify gpd */
> > + gpd->first_u32 |= GPDMA_DESC_HWO;
> > + gpd->first_u32 |= GPDMA_DESC_BDP;
> > + /* need to clear first. use these bits to calc checksum */
> > + gpd->first_u32 &= ~GPDMA_DESC_CHECKSUM;
> > + gpd->first_u32 |= msdc_dma_calcs((u8 *) gpd, 16) << 8;
> > +
> > + /* modify bd */
> > + for (j = 0; j < sglen; j++) {
> > + dma_address = sg_dma_address(sg);
> > + dma_len = sg_dma_len(sg);
> > +
> > + /* init bd */
> > + bd[j].first_u32 &= ~BDMA_DESC_BLKPAD;
> > + bd[j].first_u32 &= ~BDMA_DESC_DWPAD;
> > + bd[j].ptr = (u32)dma_address;
> > + bd[j].second_u32 &= ~BDMA_DESC_BUFLEN;
> > + bd[j].second_u32 |= (dma_len & BDMA_DESC_BUFLEN);
> > +
> > + if (j == sglen - 1) /* the last bd */
> > + bd[j].first_u32 |= BDMA_DESC_EOL;
> > + else
> > + bd[j].first_u32 &= ~BDMA_DESC_EOL;
> > +
> > + /* checksume need to clear first */
> > + bd[j].first_u32 &= ~BDMA_DESC_CHECKSUM;
> > + bd[j].first_u32 |= msdc_dma_calcs((u8 *)(&bd[j]), 16) <<
> 8;
> > + sg++;
> > + }
> > +
> > + sdr_set_field(host->base + MSDC_DMA_CFG,
> MSDC_DMA_CFG_DECSEN, 1);
> > + sdr_set_field(host->base + MSDC_DMA_CTRL,
> MSDC_DMA_CTRL_BRUSTSZ,
> > + MSDC_BURST_64B);
> > + sdr_set_field(host->base + MSDC_DMA_CTRL,
> MSDC_DMA_CTRL_MODE, 1);
> > +
> > + writel((u32)dma->gpd_addr, host->base + MSDC_DMA_SA);
> > +}
> > +
> > +static void msdc_prepare_data(struct msdc_host *host, struct
> mmc_request *mrq)
> > +{
> > + struct mmc_data *data = mrq->data;
> > +
> > + if (!(data->host_cookie & MSDC_PREPARE_FLAG)) {
> > + bool read = (data->flags & MMC_DATA_READ) != 0;
> > +
> > + data->host_cookie |= MSDC_PREPARE_FLAG;
> > + dma_map_sg(host->dev, data->sg, data->sg_len,
> > + read ? DMA_FROM_DEVICE :
> DMA_TO_DEVICE);
> > + }
> > +}
> > +
> > +static void msdc_unprepare_data(struct msdc_host *host, struct
> mmc_request *mrq)
> > +{
> > + struct mmc_data *data = mrq->data;
> > +
> > + if (data->host_cookie & MSDC_ASYNC_FLAG)
> > + return;
> > +
> > + if ((data->host_cookie & MSDC_PREPARE_FLAG)) {
> > + bool read = (data->flags & MMC_DATA_READ) != 0;
> > +
> > + dma_unmap_sg(host->dev, data->sg, data->sg_len,
> > + read ? DMA_FROM_DEVICE :
> DMA_TO_DEVICE);
> > + data->host_cookie &= ~MSDC_PREPARE_FLAG;
> > + }
> > +}
> > +
> > +/* clock control primitives */
> > +static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
> > +{
> > + u32 timeout, clk_ns;
> > + u32 mode = 0;
> > +
> > + host->timeout_ns = ns;
> > + host->timeout_clks = clks;
> > + if (host->sclk == 0) {
> > + timeout = 0;
> > + } else {
> > + clk_ns = 1000000000UL / host->sclk;
> > + timeout = (ns + clk_ns - 1) / clk_ns + clks;
> > + /* in 1048576 sclk cycle unit */
> > + timeout = (timeout + (1 << 20) - 1) >> 20;
> > + sdr_get_field(host->base + MSDC_CFG,
> MSDC_CFG_CKMOD, &mode);
> > + /*DDR mode will double the clk cycles for data timeout */
>
> How do you know you will be using DDR at this point? Don't you need to
> check for that?
>
The MSDC_CFG_CKMODE can show current mode(DDR or SDR).
> > + timeout = mode >= 2 ? timeout * 2 : timeout;
> > + timeout = timeout > 1 ? timeout - 1 : 0;
> > + timeout = timeout > 255 ? 255 : timeout;
> > + }
> > + sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, timeout);
> > +}
> > +
> > +static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz)
> > +{
> > + u32 mode;
> > + u32 flags;
> > + u32 div;
> > + u32 sclk;
> > + u32 hclk = host->hclk;
> > +
> > + if (!hz) {
> > + dev_err(host->dev, "set mclk to 0\n");
> > + host->mclk = 0;
>
> This isn't supposed to be treated as an error. The mmc core expect the
> host to gate the clock when the rate is zero.
>
> This is also needed when dealing with I/O voltage switch for UHS cards.
>
Yes, will only set the host mode to MS(which will stop the bus clock) and give a dev_dbg message.
> > + msdc_reset_hw(host);
> > + return;
> > + }
> > +
> > + flags = readl(host->base + MSDC_INTEN);
> > + sdr_clr_bits(host->base + MSDC_INTEN, flags);
> > +
> > + if (ddr) { /* may need to modify later */
> > + mode = 0x2; /* ddr mode and use divisor */
> > + if (hz >= (hclk >> 2)) {
> > + div = 0; /* mean div = 1/4 */
> > + sclk = hclk >> 2; /* sclk = clk / 4 */
> > + } else {
> > + div = (hclk + ((hz << 2) - 1)) / (hz << 2);
> > + sclk = (hclk >> 2) / div;
> > + div = (div >> 1);
> > + }
> > + } else if (hz >= hclk) {
> > + mode = 0x1; /* no divisor */
> > + div = 0;
> > + sclk = hclk;
> > + } else {
> > + mode = 0x0; /* use divisor */
> > + if (hz >= (hclk >> 1)) {
> > + div = 0; /* mean div = 1/2 */
> > + sclk = hclk >> 1; /* sclk = clk / 2 */
> > + } else {
> > + div = (hclk + ((hz << 2) - 1)) / (hz << 2);
> > + sclk = (hclk >> 2) / div;
> > + }
> > + }
> > +
> > + sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD |
> MSDC_CFG_CKDIV,
> > + (mode << 8) | (div % 0xff));
> > + while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
> > + cpu_relax();
> > +
> > + host->sclk = sclk;
> > + host->mclk = hz;
> > + host->ddr = ddr;
> > + /* need because clk changed. */
> > + msdc_set_timeout(host, host->timeout_ns, host->timeout_clks);
> > + sdr_set_bits(host->base + MSDC_INTEN, flags);
> > +
> > + dev_dbg(host->dev, "sclk: %d, ddr: %d\n", host->sclk, ddr);
> > +}
> > +
> > +static inline u32 msdc_cmd_find_resp(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd)
> > +{
> > + u32 resp;
> > +
> > + switch (mmc_resp_type(cmd)) {
> > + /* Actually, R1, R5, R6, R7 are the same */
> > + case MMC_RSP_R1:
> > + resp = 1;
> > + break;
> > + case MMC_RSP_R1B:
> > + resp = 7;
> > + break;
> > + case MMC_RSP_R2:
> > + resp = 2;
> > + break;
> > + case MMC_RSP_R3:
> > + resp = 3;
> > + break;
> > + case MMC_RSP_NONE:
> > + default:
> > + resp = 0;
> > + break;
> > + }
> > +
> > + return resp;
> > +}
>
> I would rather see that the above function return hex values instead
> of decimals.
>
Sure. Will fix it.
> > +
> > +static inline u32 msdc_cmd_prepare_raw_cmd(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd)
> > +{
> > + /* rawcmd :
> > + * vol_swt << 30 | auto_cmd << 28 | blklen << 16 | go_irq << 15 |
> > + * stop << 14 | rw << 13 | dtype << 11 | rsptyp << 7 | brk << 6 |
> opcode
> > + */
> > + u32 opcode = cmd->opcode;
> > + u32 resp = msdc_cmd_find_resp(host, mrq, cmd);
> > + u32 rawcmd = (opcode & 0x3f) | ((resp & 7) << 7);
>
> Would be nice to maintain consistency and thus stick to use hex values
> for bitwise OR/AND.
>
OK, fix it at next revision.
> > +
> > + host->cmd_rsp = resp;
> > +
> > + if ((opcode == SD_IO_RW_DIRECT && cmd->flags == (unsigned int)
> -1) ||
> > + opcode == MMC_STOP_TRANSMISSION)
> > + rawcmd |= (1 << 14);
> > + else if (opcode == SD_SWITCH_VOLTAGE)
> > + rawcmd |= (1 << 30);
> > + else if ((opcode == SD_APP_SEND_SCR) ||
> > + (opcode == SD_APP_SEND_NUM_WR_BLKS) ||
> > + (opcode == SD_SWITCH &&
> > + (mmc_cmd_type(cmd) == MMC_CMD_ADTC))
> ||
> > + (opcode == SD_APP_SD_STATUS &&
> > + (mmc_cmd_type(cmd) == MMC_CMD_ADTC))
> ||
> > + (opcode == MMC_SEND_EXT_CSD &&
> > + (mmc_cmd_type(cmd) == MMC_CMD_ADTC)))
> > + rawcmd |= (1 << 11);
> > +
> > + if (cmd->data) {
> > + struct mmc_data *data = cmd->data;
> > +
> > + if (mmc_op_multi(opcode)) {
> > + if (mmc_card_mmc(host->mmc->card) &&
> mrq->sbc &&
> > + !(mrq->sbc->arg &
> 0xFFFF0000))
> > + rawcmd |= 2 << 28; /* AutoCMD23 */
>
> Hex values and lower-case letters in the hex values, to keep consistency...
>
> I will stop commenting on this from now on, since I realize it applies
> to the complete code. Please go through the code and fix this.
Ok, will fix it.
>
> > + }
> > +
> > + rawcmd |= ((data->blksz & 0xFFF) << 16);
> > + if (data->flags & MMC_DATA_WRITE)
> > + rawcmd |= (1 << 13);
> > + if (data->blocks > 1)
> > + rawcmd |= (2 << 11);
> > + else
> > + rawcmd |= (1 << 11);
> > + /* Always use dma mode */
> > + sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_PIO);
> > +
> > + if (((host->timeout_ns != data->timeout_ns) ||
> > + (host->timeout_clks !=
> data->timeout_clks))) {
> > + msdc_set_timeout(host, data->timeout_ns,
> > + data->timeout_clks);
> > + }
> > +
> > + writel(data->blocks, host->base + SDC_BLK_NUM);
> > + }
> > + return rawcmd;
> > +}
> > +
> > +static void msdc_start_data(struct msdc_host *host, struct mmc_request
> *mrq,
> > + struct mmc_command *cmd, struct
> mmc_data *data)
> > +{
> > + bool read;
> > + unsigned long flags;
> > + u32 wints;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + if (!host->data) {
> > + host->data = data;
> > + } else {
> > + dev_err(host->dev, "%s: CMD%d [%d blocks] is active",
> > + __func__, host->mrq->cmd->opcode,
> > + host->data->blocks);
> > + dev_err(host->dev, "but new CMD%d [%d blocks]
> started\n",
> > + cmd->opcode, data->blocks);
> > + }
> > + spin_unlock_irqrestore(&host->lock, flags);
>
> How about replacing the above error check with a single WARN_ON() instead?
>
> > + read = (data->flags & MMC_DATA_READ) != 0;
>
> Simplify to:
>
> read = data->flags & MMC_DATA_READ;
OK, will fix it at next revision,
>
> > + data->error = 0;
>
> You shouldn't need to reset that, handle by the mmc core.
>
> > + if (data->stop)
> > + data->stop->error = 0;
>
> You shouldn't need to reset that, handle by the mmc core.
>
OK, will fix them at next revision,
> > +
> > + mod_delayed_work(system_wq, &host->req_timeout,
> DAT_TIMEOUT);
> > + msdc_dma_setup(host, &host->dma, data);
> > + wints = msdc_data_ints_mask(host);
> > + sdr_set_bits(host->base + MSDC_INTEN, wints);
> > + mb(); /* wait for pending IO to finish */
> > + sdr_set_field(host->base + MSDC_DMA_CTRL,
> MSDC_DMA_CTRL_START, 1);
> > + dev_dbg(host->dev, "DMA start\n");
> > + dev_dbg(host->dev, "%s: cmd=%d DMA data: %d blocks;
> read=%d\n",
> > + __func__, cmd->opcode, data->blocks, read);
> > +}
> > +
> > +static int msdc_auto_cmd_done(struct msdc_host *host, int events,
> > + struct mmc_command *cmd)
> > +{
> > + u32 *rsp = cmd->resp;
> > +
> > + rsp[0] = readl(host->base + SDC_ACMD_RESP);
> > +
> > + if (events & MSDC_INT_ACMDRDY) {
> > + cmd->error = 0;
> > + } else {
> > + msdc_reset_hw(host);
> > + if (events & MSDC_INT_ACMDCRCERR) {
> > + cmd->error = (unsigned int) -EILSEQ;
> > + host->error |= REQ_STOP_EIO;
> > + } else if (events & MSDC_INT_ACMDTMO) {
> > + cmd->error = (unsigned int) -ETIMEDOUT;
> > + host->error |= REQ_STOP_TMO;
> > + }
> > + dev_err(host->dev,
> > + "%s: AUTO_CMD%d arg=%08X; rsp %08X;
> cmd_error=%d\n",
> > + __func__, cmd->opcode, cmd->arg, rsp[0],
> > + (int)cmd->error);
> > + }
> > + return (int)(cmd->error);
>
> This is silly. The struct mmc_command|data->error field should be of
> type int and not unsigned int, which isn't the case currently.
>
> Host driver shouldn't need to deal with this casting. I have just sent
> a patch to change "error" to an int. Please align to that change, in
> all places where you use the "error" field.
>
OK, will fix it at next revision,
> > +}
> > +
> > +static void msdc_track_cmd_data(struct msdc_host *host,
> > + struct mmc_command *cmd, struct
> mmc_data *data)
> > +{
> > + if (host->error)
> > + dev_dbg(host->dev, "%s: cmd=%d arg=%08X;
> host->error=0x%08X\n",
> > + __func__, cmd->opcode, cmd->arg,
> host->error);
> > +}
> > +
> > +static void msdc_request_done(struct msdc_host *host, struct
> mmc_request *mrq)
> > +{
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + cancel_delayed_work(&host->req_timeout);
>
> This looks racy.
>
> Don't you need a cancel_delayed_work_sync() from somewhere, to be sure
> that work isn't preemted after the "host->mrq" has been reset here? Or
> maybe there is another way!? Of course that can't be done with the
> spin_locks held, but I asume you get my point.
Yes, I get your point, actually, we set a 5s timeout for each request, and, if the work already pending(means that some error happens), we do not wait it,
And the work will set the event to timeout and return,
So, maybe a good solution is that need check the return value of the cancel_delayed_work(), if it is pending, directly return, and do not set the host->mrq to 0 to avoid the race condition,
>
> > + host->mrq = NULL;
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + msdc_track_cmd_data(host, mrq->cmd, mrq->data);
> > + if (mrq->data)
> > + msdc_unprepare_data(host, mrq);
> > + mmc_request_done(host->mmc, mrq);
> > +}
> > +
> > +/* returns true if command is fully handled; returns false otherwise */
> > +static bool msdc_cmd_done(struct msdc_host *host, int events,
> > + struct mmc_request *mrq, struct
> mmc_command *cmd)
> > +{
> > + bool done = false;
> > + bool sbc_error;
> > + unsigned long flags;
> > + u32 *rsp = cmd->resp;
> > +
> > + if (mrq->sbc && cmd == mrq->cmd &&
> > + (events & (MSDC_INT_ACMDRDY |
> MSDC_INT_ACMDCRCERR
> > + | MSDC_INT_ACMDTMO)))
> > + msdc_auto_cmd_done(host, events, mrq->sbc);
> > +
> > + sbc_error = mrq->sbc && mrq->sbc->error;
> > +
> > + if (!sbc_error && !(events & (MSDC_INT_CMDRDY
> > + | MSDC_INT_RSPCRCERR
> > + | MSDC_INT_CMDTMO)))
> > + return done;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + done = !host->cmd;
> > + host->cmd = NULL;
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + if (done)
> > + return true;
> > +
> > + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY |
> > + MSDC_INTEN_RSPCRCERR |
> MSDC_INTEN_CMDTMO |
> > + MSDC_INTEN_ACMDRDY |
> MSDC_INTEN_ACMDCRCERR |
> > + MSDC_INTEN_ACMDTMO);
> > + writel(cmd->arg, host->base + SDC_ARG);
> > +
> > + switch (host->cmd_rsp) {
> > + case 0:
> > + break;
> > + case 2:
> > + rsp[0] = readl(host->base + SDC_RESP3);
> > + rsp[1] = readl(host->base + SDC_RESP2);
> > + rsp[2] = readl(host->base + SDC_RESP1);
> > + rsp[3] = readl(host->base + SDC_RESP0);
> > + break;
> > + default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
> > + rsp[0] = readl(host->base + SDC_RESP0);
> > + break;
> > + }
> > + if (!sbc_error && !(events & MSDC_INT_CMDRDY)) {
> > + msdc_reset_hw(host);
> > + if (events & MSDC_INT_RSPCRCERR) {
> > + cmd->error = (unsigned int) -EILSEQ;
> > + host->error |= REQ_CMD_EIO;
> > + } else if (events & MSDC_INT_CMDTMO) {
> > + cmd->error = (unsigned int) -ETIMEDOUT;
> > + host->error |= REQ_CMD_TMO;
> > + }
> > + }
> > + if (cmd->error)
> > + dev_dbg(host->dev,
> > + "%s: cmd=%d arg=%08X; rsp %08X;
> cmd_error=%d\n",
> > + __func__, cmd->opcode, cmd->arg,
> rsp[0],
> > + (int)cmd->error);
> > +
> > + msdc_cmd_next(host, mrq, cmd);
> > + done = true;
> > + return done;
> > +}
> > +
> > +static inline bool msdc_cmd_is_ready(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd)
> > +{
> > + unsigned long tmo = jiffies + msecs_to_jiffies(20);
> > +
> > + while ((readl(host->base + SDC_STS) & SDC_STS_CMDBUSY)
> > + && time_before(jiffies, tmo))
> > + continue;
> > +
> > + if (readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) {
> > + dev_err(host->dev, "CMD bus busy detected\n");
> > + host->error |= REQ_CMD_BUSY;
> > + msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
> > + return false;
> > + }
> > +
> > + if (mmc_resp_type(cmd) == MMC_RSP_R1B || cmd->data) {
> > + /* R1B or with data, should check SDCBUSY */
> > + while (readl(host->base + SDC_STS) &
> SDC_STS_SDCBUSY)
> > + cpu_relax();
> > + }
> > + return true;
> > +}
> > +
> > +static void msdc_start_command(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd)
> > +{
> > + u32 rawcmd;
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + if (host->cmd) {
> > + dev_err(host->dev, "%s: CMD%d is active, but new
> CMD%d is sent\n",
> > + __func__, host->cmd->opcode,
> cmd->opcode);
> > + } else {
> > + host->cmd = cmd;
> > + }
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
>
> How about replacing the above error check with a single WARN_ON() instead?
>
Sure, it is good, will fix it at next revision,
> > + if (!msdc_cmd_is_ready(host, mrq, cmd))
> > + return;
> > +
> > + if ((readl(host->base + MSDC_FIFOCS) & MSDC_FIFOCS_TXCNT) >>
> 16
> > + || (readl(host->base + MSDC_FIFOCS) &
> MSDC_FIFOCS_RXCNT)) {
> > + dev_err(host->dev, "TX/RX FIFO non-empty before start of
> IO. Reset\n");
> > + msdc_reset_hw(host);
> > + }
> > +
> > + cmd->error = 0;
> > + rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd);
> > + mod_delayed_work(system_wq, &host->req_timeout,
> DAT_TIMEOUT);
> > +
> > + sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY |
> > + MSDC_INTEN_RSPCRCERR |
> MSDC_INTEN_CMDTMO |
> > + MSDC_INTEN_ACMDRDY |
> MSDC_INTEN_ACMDCRCERR |
> > + MSDC_INTEN_ACMDTMO);
> > + writel(cmd->arg, host->base + SDC_ARG);
> > + writel(rawcmd, host->base + SDC_CMD);
> > +}
> > +
> > +static void msdc_cmd_next(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd)
> > +{
> > + if (cmd->error || (mrq->sbc && mrq->sbc->error))
> > + msdc_request_done(host, mrq);
> > + else if (cmd == mrq->sbc)
> > + msdc_start_command(host, mrq, mrq->cmd);
> > + else if (!cmd->data)
> > + msdc_request_done(host, mrq);
> > + else
> > + msdc_start_data(host, mrq, cmd, cmd->data);
> > +}
> > +
> > +static void msdc_ops_request(struct mmc_host *mmc, struct mmc_request
> *mrq)
> > +{
> > + unsigned long flags;
> > + struct msdc_host *host = mmc_priv(mmc);
> > +
> > + host->error = 0;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + if (!host->mrq) {
> > + host->mrq = mrq;
> > + } else {
> > + dev_err(host->dev,
> > + "%s: req [CMD%d] is active, new req [CMD%d]
> is sent\n",
> > + __func__, host->mrq->cmd->opcode,
> mrq->cmd->opcode);
> > + }
> > + spin_unlock_irqrestore(&host->lock, flags);
>
> How about replacing the above error check with a single WARN_ON() instead?
OK, will fix it at next revision.
>
> > +
> > + if (mrq->data)
> > + msdc_prepare_data(host, mrq);
> > +
> > + /* if SBC is required, we have HW option and SW option.
> > + * if HW option is enabled, and SBC does not have "special" flags,
> > + * use HW option, otherwise use SW option
> > + */
> > + if (mrq->sbc && (!mmc_card_mmc(mmc->card) ||
> > + (mrq->sbc->arg & 0xFFFF0000)))
> > + msdc_start_command(host, mrq, mrq->sbc);
> > + else
> > + msdc_start_command(host, mrq, mrq->cmd);
> > +}
> > +
> > +static void msdc_pre_req(struct mmc_host *mmc, struct mmc_request
> *mrq,
> > + bool is_first_req)
> > +{
> > + struct msdc_host *host = mmc_priv(mmc);
> > + struct mmc_data *data = mrq->data;
> > +
> > + if (!data)
> > + return;
> > +
> > + msdc_prepare_data(host, mrq);
> > + data->host_cookie |= MSDC_ASYNC_FLAG;
> > +}
> > +
> > +static void msdc_post_req(struct mmc_host *mmc, struct mmc_request
> *mrq,
> > + int err)
> > +{
> > + struct msdc_host *host = mmc_priv(mmc);
> > + struct mmc_data *data;
> > +
> > + data = mrq->data;
> > + if (!data)
> > + return;
> > + if (data->host_cookie) {
> > + data->host_cookie &= ~MSDC_ASYNC_FLAG;
> > + msdc_unprepare_data(host, mrq);
> > + }
> > +}
> > +
> > +static void msdc_data_xfer_next(struct msdc_host *host,
> > + struct mmc_request *mrq, struct
> mmc_data *data)
> > +{
> > + if (mmc_op_multi(mrq->cmd->opcode) && mrq->stop
> && !mrq->stop->error &&
> > + (!data->bytes_xfered || !mrq->sbc))
> > + msdc_start_command(host, mrq, mrq->stop);
> > + else
> > + msdc_request_done(host, mrq);
> > +}
> > +
> > +static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
> > + struct mmc_request *mrq, struct
> mmc_data *data)
> > +{
> > + struct mmc_command *stop = data->stop;
> > + unsigned long flags;
> > + bool done;
> > + u32 wints;
> > +
> > + bool check_data = (events &
> > + (MSDC_INT_XFER_COMPL | MSDC_INT_DATCRCERR |
> MSDC_INT_DATTMO
> > + | MSDC_INT_DMA_BDCSERR | MSDC_INT_DMA_GPDCSERR
> > + | MSDC_INT_DMA_PROTECT));
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + done = !host->data;
> > + if (check_data)
> > + host->data = NULL;
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + if (done)
> > + return true;
> > +
> > + if (check_data || (stop && stop->error)) {
> > + dev_dbg(host->dev, "DMA status: 0x%8X\n",
> > + readl(host->base +
> MSDC_DMA_CFG));
> > + sdr_set_field(host->base + MSDC_DMA_CTRL,
> MSDC_DMA_CTRL_STOP,
> > + 1);
> > + while (readl(host->base + MSDC_DMA_CFG) &
> MSDC_DMA_CFG_STS)
> > + ;
> > + mb(); /* wait for pending IO to finish */
> > + wints = msdc_data_ints_mask(host);
> > + sdr_clr_bits(host->base + MSDC_INTEN, wints);
> > + dev_dbg(host->dev, "DMA stop\n");
> > +
> > + if ((events & MSDC_INT_XFER_COMPL) && (!stop
> || !stop->error)) {
> > + data->bytes_xfered = data->blocks *
> data->blksz;
> > + } else {
> > + dev_err(host->dev, "interrupt events: %x\n",
> events);
> > + msdc_reset_hw(host);
> > + host->error |= REQ_DAT_ERR;
> > + data->bytes_xfered = 0;
> > +
> > + if (events & MSDC_INT_DATTMO)
> > + data->error = (unsigned int)
> -ETIMEDOUT;
> > +
> > + dev_err(host->dev, "%s: cmd=%d; blocks=%d",
> > + __func__, mrq->cmd->opcode,
> data->blocks);
> > + dev_err(host->dev, "data_error=%d
> xfer_size=%d\n",
> > + (int)data->error,
> data->bytes_xfered);
> > + }
> > +
> > + msdc_data_xfer_next(host, mrq, data);
> > + done = true;
> > + }
> > + return done;
> > +}
> > +
> > +static void msdc_set_buswidth(struct msdc_host *host, u32 width)
> > +{
> > + u32 val = readl(host->base + SDC_CFG);
> > +
> > + val &= ~SDC_CFG_BUSWIDTH;
> > +
> > + switch (width) {
> > + default:
> > + case MMC_BUS_WIDTH_1:
> > + val |= (MSDC_BUS_1BITS << 16);
> > + break;
> > + case MMC_BUS_WIDTH_4:
> > + val |= (MSDC_BUS_4BITS << 16);
> > + break;
> > + case MMC_BUS_WIDTH_8:
> > + val |= (MSDC_BUS_8BITS << 16);
> > + break;
> > + }
> > +
> > + writel(val, host->base + SDC_CFG);
> > + dev_dbg(host->dev, "Bus Width = %d", width);
> > +}
> > +
> > +static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios
> *ios)
> > +{
> > + struct msdc_host *host = mmc_priv(mmc);
> > + int min_uv, max_uv;
> > + int ret = 0;
> > +
> > + if (!IS_ERR(mmc->supply.vqmmc)) {
> > +
> > + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
> > + min_uv = 3300000;
> > + max_uv = 3300000;
> > + } else if (ios->signal_voltage ==
> MMC_SIGNAL_VOLTAGE_180) {
> > + min_uv = 1800000;
> > + max_uv = 1800000;
> > + } else {
> > + dev_err(host->dev, "Unsupported signal
> voltage!\n");
> > + return -EINVAL;
> > + }
> > +
> > + ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv,
> max_uv);
> > + if (ret) {
> > + dev_err(host->dev,
> > + "Regulator set error %d: %d
> - %d\n",
> > + ret, min_uv, max_uv);
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static void msdc_request_timeout(struct work_struct *work)
> > +{
> > + struct msdc_host *host = container_of(work, struct msdc_host,
> > + req_timeout.work);
> > + unsigned long flags;
> > + struct mmc_request *mrq;
> > + struct mmc_command *cmd;
> > + struct mmc_data *data;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + mrq = ACCESS_ONCE(host->mrq);
> > + cmd = ACCESS_ONCE(host->cmd);
> > + data = ACCESS_ONCE(host->data);
>
> Why do you need the ACCESS_ONCE here. Aren't these pointers already
> protected by the spin_lock?
> OK, will remove the ACCESS_ONCE.
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + /* simulate HW timeout status */
> > + dev_err(host->dev, "%s: aborting cmd/data/mrq\n", __func__);
> > + if (mrq) {
> > + dev_err(host->dev, "%s: aborting mrq=%p cmd=%d\n",
> __func__,
> > + mrq, mrq->cmd->opcode);
> > + if (cmd) {
> > + dev_err(host->dev, "%s: aborting cmd=%d\n",
> > + __func__, cmd->opcode);
> > + msdc_cmd_done(host, MSDC_INT_CMDTMO,
> mrq, cmd);
> > + } else if (data) {
> > + dev_err(host->dev, "%s: abort data: cmd%d; %d
> blocks\n",
> > + __func__, mrq->cmd->opcode,
> data->blocks);
> > + msdc_data_xfer_done(host,
> MSDC_INT_DATTMO, mrq, data);
> > + }
> > + }
> > +}
> > +
> > +static irqreturn_t msdc_irq(int irq, void *dev_id)
> > +{
> > + struct msdc_host *host = (struct msdc_host *) dev_id;
> > +
> > + while (true) {
> > + unsigned long flags;
> > + struct mmc_request *mrq;
> > + struct mmc_command *cmd;
> > + struct mmc_data *data;
> > + u32 events, event_mask;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + events = readl(host->base + MSDC_INT);
> > + event_mask = readl(host->base + MSDC_INTEN);
> > + /* clear interrupts */
> > + writel(events, host->base + MSDC_INT);
> > +
> > + mrq = ACCESS_ONCE(host->mrq);
> > + cmd = ACCESS_ONCE(host->cmd);
> > + data = ACCESS_ONCE(host->data);
>
> Why do you need the ACCESS_ONCE here. Aren't these pointers already
> protected by the spin_lock?
Will fix it at next revision.
>
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + if (!(events & event_mask))
> > + break;
> > +
> > + if (!mrq) {
> > + dev_err(host->dev,
> > + "%s: MRQ=NULL; events=%08X;
> event_mask=%08X\n",
> > + __func__, events, event_mask);
> > + WARN_ON(1);
> > + break;
> > + }
> > +
> > + dev_dbg(host->dev, "%s: events=%08X\n", __func__,
> events);
> > +
> > + if (cmd)
> > + msdc_cmd_done(host, events, mrq, cmd);
> > + else if (data)
> > + msdc_data_xfer_done(host, events, mrq,
> data);
> > + }
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static void msdc_init_hw(struct msdc_host *host)
> > +{
> > + u32 val;
> > + /* Configure to MMC/SD mode */
> > + sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_MODE,
> MSDC_SDMMC);
> > +
> > + /* Reset */
> > + msdc_reset_hw(host);
> > +
> > + /* Disable card detection */
> > + sdr_clr_bits(host->base + MSDC_PS, MSDC_PS_CDEN);
> > +
> > + /* Disable and clear all interrupts */
> > + writel(0, host->base + MSDC_INTEN);
> > + val = readl(host->base + MSDC_INT);
> > + writel(val, host->base + MSDC_INT);
> > +
> > + writel(0, host->base + MSDC_PAD_TUNE);
> > + writel(0, host->base + MSDC_IOCON);
> > + sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL,
> 1);
> > + writel(0x403c004f, host->base + MSDC_PATCH_BIT);
> > + sdr_set_field(host->base + MSDC_PATCH_BIT,
> MSDC_CKGEN_MSDC_DLY_SEL, 1);
> > + writel(0xffff0089, host->base + MSDC_PATCH_BIT1);
> > + /* Configure to enable SDIO mode.
> > + it's must otherwise sdio cmd5 failed */
> > + sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
> > +
> > + /* disable detect SDIO device interrupt function */
> > + sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> > +
> > + /* Configure to default data timeout */
> > + sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
> > + msdc_set_buswidth(host, MMC_BUS_WIDTH_1);
> > +
> > + dev_dbg(host->dev, "init hardware done!");
> > +}
> > +
> > +static void msdc_deinit_hw(struct msdc_host *host)
> > +{
> > + u32 val;
> > +
> > + /* Disable and clear all interrupts */
> > + writel(0, host->base + MSDC_INTEN);
> > +
> > + val = readl(host->base + MSDC_INT);
> > + writel(val, host->base + MSDC_INT);
> > +
> > + clk_disable(host->src_clk);
> > + clk_unprepare(host->src_clk);
>
> Please use clk_disable_unprepare() instead.
>
OK, will fix it.
> > +}
> > +
> > +/* init gpd and bd list in msdc_drv_probe */
> > +static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma
> *dma)
> > +{
> > + struct mt_gpdma_desc *gpd = dma->gpd;
> > + struct mt_bdma_desc *bd = dma->bd;
> > + int i;
> > +
> > + memset(gpd, 0, sizeof(struct mt_gpdma_desc) * MAX_GPD_NUM);
> > + gpd->next = (u32)dma->gpd_addr + sizeof(struct mt_gpdma_desc);
> > +
> > + gpd->first_u32 |= GPDMA_DESC_BDP; /* hwo, cs, bd pointer */
> > + gpd->ptr = (u32)dma->bd_addr; /* physical address */
> > +
> > + memset(bd, 0, sizeof(struct mt_bdma_desc) *
> MAX_BD_PER_GPD);
> > +
> > + for (i = 0; i < (MAX_BD_PER_GPD - 1); i++)
> > + bd[i].next = (u32)dma->bd_addr + sizeof(*bd) * (i + 1);
> > +}
> > +
> > +static int timing_is_uhs(unsigned char timing)
> > +{
> > + if (timing != MMC_TIMING_LEGACY &&
> > + timing != MMC_TIMING_MMC_HS &&
> > + timing != MMC_TIMING_SD_HS)
>
> I don't like these assumtions. There may be other cases which isn't
> covered here that isn't UHS.
>
Actually, I want set different driving by 3.3V/1.8V signal.
So, will replace it ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180 and rename the function name.
> > + return 1;
> > + return 0;
> > +}
> > +
> > +static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > +{
> > + struct msdc_host *host = mmc_priv(mmc);
> > + int ret;
> > + u32 ddr = 0;
> > +
> > + if (ios->timing == MMC_TIMING_UHS_DDR50)
> > + ddr = 1;
>
> I am not sure if this controller supports eMMC cards as well, but if
> that's the case and it also supports DDR you may also want to check
> for MMC_TIMING_MMC_DDR52.
>
Will add it at next revision.
> > +
> > + msdc_set_buswidth(host, ios->bus_width);
> > +
> > + /* Suspend/Resume will do power off/on */
> > + switch (ios->power_mode) {
> > + case MMC_POWER_UP:
> > + msdc_init_hw(host);
> > + if (!IS_ERR(mmc->supply.vmmc)) {
> > + ret = mmc_regulator_set_ocr(mmc,
> mmc->supply.vmmc,
> > + ios->vdd);
> > + if (ret) {
> > + dev_err(host->dev, "Failed to set
> vmmc power!\n");
> > + return;
> > + }
> > + }
> > + break;
> > + case MMC_POWER_ON:
> > + if (!IS_ERR(mmc->supply.vqmmc)) {
> > + ret = regulator_enable(mmc->supply.vqmmc);
>
> The calls to regulator_enable|disable() for the vqmmc will not be
> balanced properly here. You need a local cache variable like
> "is_enabled" to keep track of this.
>
OK, will fix it at next revision,
> > + if (ret)
> > + dev_err(host->dev, "Failed to set
> vqmmc power!\n");
> > + }
> > + break;
> > + case MMC_POWER_OFF:
> > + if (!IS_ERR(mmc->supply.vmmc))
> > + mmc_regulator_set_ocr(mmc,
> mmc->supply.vmmc, 0);
> > +
> > + if (!IS_ERR(mmc->supply.vqmmc))
> > + regulator_disable(mmc->supply.vqmmc);
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + /* Apply different pinctrl settings for different timing */
> > + if (timing_is_uhs(ios->timing))
> > + pinctrl_select_state(host->pinctrl, host->pins_uhs);
> > + else
> > + pinctrl_select_state(host->pinctrl, host->pins_default);
> > +
> > + if (host->mclk != ios->clock || host->ddr != ddr)
> > + msdc_set_mclk(host, ddr, ios->clock);
> > +}
> > +
> > +static struct mmc_host_ops mt_msdc_ops = {
> > + .post_req = msdc_post_req,
> > + .pre_req = msdc_pre_req,
> > + .request = msdc_ops_request,
> > + .set_ios = msdc_ops_set_ios,
> > + .start_signal_voltage_switch = msdc_ops_switch_volt,
> > +};
> > +
> > +static int msdc_drv_probe(struct platform_device *pdev)
> > +{
> > + struct mmc_host *mmc;
> > + struct msdc_host *host;
> > + struct resource *res;
> > + int ret;
> > +
> > + if (!pdev->dev.of_node) {
> > + dev_err(&pdev->dev, "No DT found\n");
> > + return -EINVAL;
> > + }
> > + /* Allocate MMC host for this device */
> > + mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
> > + if (!mmc)
> > + return -ENOMEM;
> > +
> > + host = mmc_priv(mmc);
> > + ret = mmc_of_parse(mmc);
> > + if (ret)
> > + goto host_free;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + host->base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(host->base)) {
> > + ret = PTR_ERR(host->base);
> > + goto host_free;
> > + }
> > +
> > + ret = mmc_regulator_get_supply(mmc);
> > + if (ret == -EPROBE_DEFER)
> > + goto host_free;
> > +
> > + host->src_clk = devm_clk_get(&pdev->dev, "source");
> > + if (IS_ERR(host->src_clk)) {
> > + dev_err(&pdev->dev,
> > + "Invalid source clock from the device
> tree!\n");
>
> You can remove this print, it's already handled by the common clk framework.
Ok, will remove it at next revision,
>
> > + ret = PTR_ERR(host->src_clk);
> > + goto host_free;
> > + }
> > +
> > + host->irq = platform_get_irq(pdev, 0);
> > + if (host->irq < 0) {
> > + ret = -EINVAL;
> > + goto host_free;
> > + }
> > +
> > + host->pinctrl = devm_pinctrl_get(&pdev->dev);
> > + if (IS_ERR(host->pinctrl)) {
> > + ret = PTR_ERR(host->pinctrl);
> > + dev_err(&pdev->dev, "Cannot find pinctrl!\n");
> > + goto host_free;
> > + }
> > +
> > + host->pins_default = pinctrl_lookup_state(host->pinctrl, "default");
> > + if (IS_ERR(host->pins_default)) {
> > + ret = PTR_ERR(host->pins_default);
> > + dev_err(&pdev->dev, "Cannot find pinctrl default!\n");
> > + goto host_free;
> > + }
> > +
> > + host->pins_uhs = pinctrl_lookup_state(host->pinctrl, "state_uhs");
> > + if (IS_ERR(host->pins_uhs)) {
> > + ret = PTR_ERR(host->pins_uhs);
> > + dev_err(&pdev->dev, "Cannot find pinctrl uhs!\n");
> > + goto host_free;
> > + }
> > +
> > + host->dev = &pdev->dev;
> > + host->mmc = mmc;
> > + /* Set host parameters to mmc */
> > + mmc->ops = &mt_msdc_ops;
> > + mmc->f_min = 260000;
>
> Doesn't f_min depend on some internal divider algorithm and the clock
> rate? So, then it should maybe be calculated instead of fixed?
>
Yes, the f_min is the source_clock / (4 * 255);
> > + mmc->ocr_avail = MMC_VDD_30_31 | MMC_VDD_31_32 |
> MMC_VDD_32_33;
>
> "ocr_avail" should be fetched from the vmmc regulator, when you invoke
> mmc_regulator_get_supply() above.
Yes, I also want to remove it, but, Not all devices use regulator, our SDIO device which connected on MSDC3, it's power is controlled by gpio.
This because the regulator of the PMU is not enough.
>
> > +
> > + mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> > + /* MMC core transfer sizes tunable parameters */
> > + mmc->max_segs = MAX_BD_NUM;
> > + mmc->max_seg_size = 64 * 1024;
> > + mmc->max_blk_size = 2048;
> > + mmc->max_req_size = 512 * 1024;
> > + mmc->max_blk_count = mmc->max_req_size;
> > +
> > + host->hclk = clk_get_rate(host->src_clk);
> > + host->timeout_clks = 3 * 1048576;
> > + host->dma.gpd = dma_alloc_coherent(&pdev->dev,
> > + MAX_GPD_NUM * sizeof(struct
> mt_gpdma_desc),
> > + &host->dma.gpd_addr,
> GFP_KERNEL);
> > + host->dma.bd = dma_alloc_coherent(&pdev->dev,
> > + MAX_BD_NUM * sizeof(struct
> mt_bdma_desc),
> > + &host->dma.bd_addr, GFP_KERNEL);
> > + if ((!host->dma.gpd) || (!host->dma.bd)) {
> > + ret = -ENOMEM;
> > + goto release_mem;
> > + }
> > + msdc_init_gpd_bd(host, &host->dma);
> > + INIT_DELAYED_WORK(&host->req_timeout,
> msdc_request_timeout);
> > + spin_lock_init(&host->lock);
> > +
> > + platform_set_drvdata(pdev, mmc);
> > + clk_prepare(host->src_clk);
>
> This should be clk_prepare_enable().
>
I will remove the clk_prepare here and use clk_prepare_enable() at msdc_ungate_clock();
> > +
> > + ret = devm_request_irq(&pdev->dev, (unsigned int) host->irq,
> msdc_irq,
> > + IRQF_TRIGGER_LOW | IRQF_ONESHOT, pdev->name,
> host);
> > + if (ret)
> > + goto release;
> > +
> > + ret = mmc_add_host(mmc);
> > + if (ret)
> > + goto release;
> > +
> > + return 0;
> > +
> > +release:
> > + platform_set_drvdata(pdev, NULL);
> > + msdc_deinit_hw(host);
> > +release_mem:
> > + if (host->dma.gpd)
> > + dma_free_coherent(&pdev->dev,
> > + MAX_GPD_NUM * sizeof(struct
> mt_gpdma_desc),
> > + host->dma.gpd, host->dma.gpd_addr);
> > + if (host->dma.bd)
> > + dma_free_coherent(&pdev->dev,
> > + MAX_BD_NUM * sizeof(struct mt_bdma_desc),
> > + host->dma.bd, host->dma.bd_addr);
> > +host_free:
> > + mmc_free_host(mmc);
> > +
> > + return ret;
> > +}
> > +
> > +static int msdc_drv_remove(struct platform_device *pdev)
> > +{
> > + struct mmc_host *mmc;
> > + struct msdc_host *host;
> > +
> > + mmc = platform_get_drvdata(pdev);
> > + host = mmc_priv(mmc);
> > +
> > + platform_set_drvdata(pdev, NULL);
> > + mmc_remove_host(host->mmc);
> > + msdc_deinit_hw(host);
> > +
> > + dma_free_coherent(&pdev->dev,
> > + MAX_GPD_NUM * sizeof(struct
> mt_gpdma_desc),
> > + host->dma.gpd, host->dma.gpd_addr);
> > + dma_free_coherent(&pdev->dev, MAX_BD_NUM * sizeof(struct
> mt_bdma_desc),
> > + host->dma.bd, host->dma.bd_addr);
> > +
> > + mmc_free_host(host->mmc);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id msdc_of_ids[] = {
> > + { .compatible = "mediatek,mt8135-mmc", },
> > + {}
> > +};
> > +
> > +static struct platform_driver mt_msdc_driver = {
> > + .probe = msdc_drv_probe,
> > + .remove = msdc_drv_remove,
> > + .driver = {
> > + .name = "mtk-msdc",
> > + .of_match_table = msdc_of_ids,
> > + },
> > +};
> > +
> > +module_platform_driver(mt_msdc_driver);
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_DESCRIPTION("MediaTek SD/MMC Card Driver");
> > --
> > 1.8.1.1.dirty
> >
>
> Kind regards
> Uffe
************* Email Confidentiality Notice ********************
The information contained in this e-mail message (including any
attachments) may be confidential, proprietary, privileged, or otherwise
exempt from disclosure under applicable laws. It is intended to be
conveyed only to the designated recipient(s). Any use, dissemination,
distribution, printing, retaining or copying of this e-mail (including its
attachments) by unintended recipient(s) is strictly prohibited and may
be unlawful. If you are not an intended recipient of this e-mail, or believe
that you have received this e-mail in error, please notify the sender
immediately (by replying to this e-mail), delete any and all copies of
this e-mail (including any attachments) from your system, and do not
disclose the content of this e-mail to any other person. Thank you!
Powered by blists - more mailing lists