| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1428080481-18591-6-git-send-email-mcoquelin.stm32@gmail.com>
Date: Fri, 3 Apr 2015 19:01:11 +0200
From: Maxime Coquelin <mcoquelin.stm32@...il.com>
To: u.kleine-koenig@...gutronix.de, afaerber@...e.de,
geert@...ux-m68k.org, Rob Herring <robh+dt@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Linus Walleij <linus.walleij@...aro.org>,
Arnd Bergmann <arnd@...db.de>, stefan@...er.ch,
pmeerw@...erw.net, pebolle@...cali.nl, peter@...leysoftware.com,
andy.shevchenko@...il.com, cw00.choi@...sung.com,
Russell King <linux@....linux.org.uk>,
Daniel Lezcano <daniel.lezcano@...aro.org>
Cc: Jonathan Corbet <corbet@....net>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Thomas Gleixner <tglx@...utronix.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.cz>,
Andrew Morton <akpm@...ux-foundation.org>,
"David S. Miller" <davem@...emloft.net>,
Mauro Carvalho Chehab <mchehab@....samsung.com>,
Joe Perches <joe@...ches.com>, Antti Palosaari <crope@....fi>,
Tejun Heo <tj@...nel.org>, Will Deacon <will.deacon@....com>,
Nikolay Borisov <Nikolay.Borisov@....com>,
Rusty Russell <rusty@...tcorp.com.au>,
Kees Cook <keescook@...omium.org>,
Michal Marek <mmarek@...e.cz>, linux-doc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-serial@...r.kernel.org, linux-arch@...r.kernel.org,
linux-api@...r.kernel.org, mcoquelin.stm32@...il.com
Subject: [PATCH v5 05/15] dt-bindings: Document the STM32 reset bindings
This adds documentation of device tree bindings for the
STM32 reset controller.
Tested-by: Chanwoo Choi <cw00.choi@...sung.com>
Acked-by: Philipp Zabel <p.zabel@...gutronix.de>
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@...il.com>
---
.../devicetree/bindings/reset/st,stm32-rcc.txt | 107 +++++++++++++++++++++
1 file changed, 107 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
new file mode 100644
index 0000000..c1b0f8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
@@ -0,0 +1,107 @@
+STMicroelectronics STM32 Peripheral Reset Controller
+====================================================
+
+The RCC IP is both a reset and a clock controller. This documentation only
+documents the reset part.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,stm32-rcc"
+- reg: should be register base and length as documented in the
+ datasheet
+- #reset-cells: 1, see below
+
+example:
+
+rcc: reset@...23800 {
+ #reset-cells = <1>;
+ compatible = "st,stm32-rcc";
+ reg = <0x40023800 0x400>;
+};
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+For example, for CRC reset:
+ crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140
+
+example:
+
+ timer2 {
+ resets = <&rcc 256>;
+ };
+
+List of valid indices for STM32F429:
+ - gpioa: 128
+ - gpiob: 129
+ - gpioc: 130
+ - gpiod: 131
+ - gpioe: 132
+ - gpiof: 133
+ - gpiog: 134
+ - gpioh: 135
+ - gpioi: 136
+ - gpioj: 137
+ - gpiok: 138
+ - crc: 140
+ - dma1: 149
+ - dma2: 150
+ - dma2d: 151
+ - ethmac: 153
+ - otghs: 157
+ - dcmi: 160
+ - cryp: 164
+ - hash: 165
+ - rng: 166
+ - otgfs: 167
+ - fmc: 192
+ - tim2: 256
+ - tim3: 257
+ - tim4: 258
+ - tim5: 259
+ - tim6: 260
+ - tim7: 261
+ - tim12: 262
+ - tim13: 263
+ - tim14: 264
+ - wwdg: 267
+ - spi2: 270
+ - spi3: 271
+ - uart2: 273
+ - uart3: 274
+ - uart4: 275
+ - uart5: 276
+ - i2c1: 277
+ - i2c2: 278
+ - i2c3: 279
+ - can1: 281
+ - can2: 282
+ - pwr: 284
+ - dac: 285
+ - uart7: 286
+ - uart8: 287
+ - tim1: 288
+ - tim8: 289
+ - usart1: 292
+ - usart6: 293
+ - adc: 296
+ - sdio: 299
+ - spi1: 300
+ - spi4: 301
+ - syscfg: 302
+ - tim9: 304
+ - tim10: 305
+ - tim11: 306
+ - spi5: 308
+ - spi6: 309
+ - sai1: 310
+ - ltdc: 314
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists