| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 4 Apr 2015 10:27:30 -0400
From: Peter Hurley <peter@...leysoftware.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Jiri Slaby <jslaby@...e.cz>,
Andrew Morton <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org, linux-next@...r.kernel.org,
linux-serial@...r.kernel.org, Rob Herring <robh@...nel.org>,
Yinghai Lu <yinghai@...nel.org>,
Peter Hurley <peter@...leysoftware.com>
Subject: [PATCH v3] earlycon: 8250: Fix command line regression
Restore undocumented behavior of kernel command line parameters of
the forms:
console=uart[8250],io|mmio|mmio32,<addr>[,options]
console=uart[8250],<addr>[,options]
where 'options' have not been specified; in this case, the hardware
is assumed to be initialized.
Document the required behavior of the original implementation.
Fixes: c7cef0a84912cab3c9df8 ("console: Add extensible console matching")
Reported-by: Yinghai Lu <yinghai@...nel.org>
Signed-off-by: Peter Hurley <peter@...leysoftware.com>
---
v3: Fixed automatic console to port line settings initialization;
open-coded serial8250_console_setup() so the baud can be probed;
added sha reference in commit log
v2: Fixed regression which allowed "console=uart1337,..." to start a
console (but not an earlycon)
+ fixed earlycon= documentation related required behavior fixed by
this patch
Documentation/kernel-parameters.txt | 18 ++++++++++++++---
drivers/tty/serial/8250/8250_core.c | 38 +++++++++++++++++++++++++++++++++---
drivers/tty/serial/8250/8250_early.c | 19 ------------------
3 files changed, 50 insertions(+), 25 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index bfcb1a6..1facf0b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -713,10 +713,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
uart[8250],io,<addr>[,options]
uart[8250],mmio,<addr>[,options]
+ uart[8250],mmio32,<addr>[,options]
+ uart[8250],0x<addr>[,options]
Start an early, polled-mode console on the 8250/16550
UART at the specified I/O port or MMIO address,
- switching to the matching ttyS device later. The
- options are the same as for ttyS, above.
+ switching to the matching ttyS device later.
+ MMIO inter-register address stride is either 8-bit
+ (mmio) or 32-bit (mmio32).
+ If none of [io|mmio|mmio32], <addr> is assumed to be
+ equivalent to 'mmio'. 'options' are specified in the
+ same format described for ttyS above; if unspecified,
+ the h/w is not re-initialized.
+
hvc<n> Use the hypervisor console device <n>. This is for
both Xen and PowerPC hypervisors.
@@ -944,11 +952,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
uart[8250],io,<addr>[,options]
uart[8250],mmio,<addr>[,options]
uart[8250],mmio32,<addr>[,options]
+ uart[8250],0x<addr>[,options]
Start an early, polled-mode console on the 8250/16550
UART at the specified I/O port or MMIO address.
MMIO inter-register address stride is either 8-bit
(mmio) or 32-bit (mmio32).
- The options are the same as for ttyS, above.
+ If none of [io|mmio|mmio32], <addr> is assumed to be
+ equivalent to 'mmio'. 'options' are specified in the
+ same format described for "console=ttyS<n>"; if
+ unspecified, the h/w is not initialized.
pl011,<addr>
Start an early, polled-mode console on a pl011 serial
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index e0fb5f0..f59c7a0 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -3447,6 +3447,22 @@ static int univ8250_console_setup(struct console *co, char *options)
return serial8250_console_setup(up, options);
}
+/* FIXME: this is broken on most other 8250 h/w */
+static unsigned int probe_baud(struct uart_port *port)
+{
+ unsigned char lcr, dll, dlm;
+ unsigned int quot;
+
+ lcr = serial_port_in(port, UART_LCR);
+ serial_port_out(port, UART_LCR, lcr | UART_LCR_DLAB);
+ dll = serial_port_in(port, UART_DLL);
+ dlm = serial_port_in(port, UART_DLM);
+ serial_port_out(port, UART_LCR, lcr);
+
+ quot = (dlm << 8) | dll;
+ return (port->uartclk / 16) / quot;
+}
+
/**
* univ8250_console_match - non-standard console matching
* @co: registering console
@@ -3455,13 +3471,18 @@ static int univ8250_console_setup(struct console *co, char *options)
* @options: ptr to option string from console command line
*
* Only attempts to match console command lines of the form:
- * console=uart<>,io|mmio|mmio32,<addr>,<options>
- * console=uart<>,<addr>,options
+ * console=uart[8250],io|mmio|mmio32,<addr>[,<options>]
+ * console=uart[8250],0x<addr>[,<options>]
* This form is used to register an initial earlycon boot console and
* replace it with the serial8250_console at 8250 driver init.
*
* Performs console setup for a match (as required by interface)
*
+ * ** HACK ALERT **
+ * If no <options> are specified, then assume the h/w is already setup.
+ * This was the undocumented behavior of the original implementation so
+ * it is cast in stone forever.
+ *
* Returns 0 if console matches; otherwise non-zero to use default matching
*/
static int univ8250_console_match(struct console *co, char *name, int idx,
@@ -3475,12 +3496,16 @@ static int univ8250_console_match(struct console *co, char *name, int idx,
if (strncmp(name, match, 4) != 0)
return -ENODEV;
+ if (idx && idx != 8250)
+ return -ENODEV;
+
if (uart_parse_earlycon(options, &iotype, &addr, &options))
return -ENODEV;
/* try to match the port specified on the command line */
for (i = 0; i < nr_uarts; i++) {
struct uart_port *port = &serial8250_ports[i].port;
+ int baud, bits = 8, parity = 'n', flow = 'n';
if (port->iotype != iotype)
continue;
@@ -3490,8 +3515,15 @@ static int univ8250_console_match(struct console *co, char *name, int idx,
if (iotype == UPIO_PORT && port->iobase != addr)
continue;
+ /* link port to console */
co->index = i;
- return univ8250_console_setup(co, options);
+ port->cons = co;
+
+ if (options && *options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ baud = probe_baud(port);
+ return uart_set_options(port, port->cons, baud, parity, bits, flow);
}
return -ENODEV;
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index e95ebfe..8e11968 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -105,21 +105,6 @@ static void __init early_serial8250_write(struct console *console,
serial8250_early_out(port, UART_IER, ier);
}
-static unsigned int __init probe_baud(struct uart_port *port)
-{
- unsigned char lcr, dll, dlm;
- unsigned int quot;
-
- lcr = serial8250_early_in(port, UART_LCR);
- serial8250_early_out(port, UART_LCR, lcr | UART_LCR_DLAB);
- dll = serial8250_early_in(port, UART_DLL);
- dlm = serial8250_early_in(port, UART_DLM);
- serial8250_early_out(port, UART_LCR, lcr);
-
- quot = (dlm << 8) | dll;
- return (port->uartclk / 16) / quot;
-}
-
static void __init init_port(struct earlycon_device *device)
{
struct uart_port *port = &device->port;
@@ -151,10 +136,6 @@ static int __init early_serial8250_setup(struct earlycon_device *device,
struct uart_port *port = &device->port;
unsigned int ier;
- device->baud = probe_baud(&device->port);
- snprintf(device->options, sizeof(device->options), "%u",
- device->baud);
-
/* assume the device was initialized, only mask interrupts */
ier = serial8250_early_in(port, UART_IER);
serial8250_early_out(port, UART_IER, ier & UART_IER_UUE);
--
2.3.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists