| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1428363334.22268.9.camel@axtens.net>
Date: Tue, 07 Apr 2015 09:35:34 +1000
From: Daniel Axtens <dja@...ens.net>
To: Yijing Wang <wangyijing@...wei.com>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>,
Jiang Liu <jiang.liu@...ux.intel.com>,
linux-pci@...r.kernel.org, Yinghai Lu <yinghai@...nel.org>,
linux-kernel@...r.kernel.org, Marc Zyngier <marc.zyngier@....com>,
linux-arm-kernel@...ts.infradead.org,
Russell King <linux@....linux.org.uk>, x86@...nel.org,
Thomas Gleixner <tglx@...utronix.de>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Rusty Russell <rusty@...tcorp.com.au>,
Tony Luck <tony.luck@...el.com>, linux-ia64@...r.kernel.org,
"David S. Miller" <davem@...emloft.net>,
Guan Xuetao <gxt@...c.pku.edu.cn>, linux-alpha@...r.kernel.org,
linux-m68k@...ts.linux-m68k.org, Liviu Dudau <liviu@...au.co.uk>,
Arnd Bergmann <arnd@...db.de>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
linuxppc-dev@...ts.ozlabs.org
Subject: Re: [PATCH v9 19/30] powerpc/pci: Use pci_scan_host_bridge() for
simplicity
I've been looking at this patch series for a while now, and I now
believe it's ready on the PowerPC side.
I was originally concerned that it would break odd corner cases,
particularly where similar code appears (namely kernel/pci_hotplug.c and
kernel/pci_of_scan.c). However, upon further examination, talking with
Yijing, and some testing, I'm now convinced that it is indeed restricted
to the generic code, and doesn't change behaviour.
This is both a plus and a minus: because it's currently restricted to
generic code, I'm confident it works, but the down side is that it
doesn't yet simplify our arch-specific complexity. We'll need to do some
more work on our side to reap the full benefits.
I tested this entire series on a PowerNV machine, including doing EEH
injection to trigger PCI hotplug:
Tested-by: Daniel Axtens <dja@...ens.net>
For completeness, it would be good to test it on Cell, as they are the
only remaining user of pci_of_scan.c
In conclusion, this patch is
Reviewed-by: Daniel Axtens <dja@...ens.net>
Regards,
Daniel Axtens
On Fri, 2015-04-03 at 17:25 +0800, Yijing Wang wrote:
> Now we could use pci_scan_host_bridge() to scan
> pci buses, provide powerpc specific pci_host_bridge_ops.
>
> Signed-off-by: Yijing Wang <wangyijing@...wei.com>
> CC: Benjamin Herrenschmidt <benh@...nel.crashing.org>
> CC: linuxppc-dev@...ts.ozlabs.org
> ---
> arch/powerpc/kernel/pci-common.c | 62 +++++++++++++++++++++++--------------
> 1 files changed, 38 insertions(+), 24 deletions(-)
>
> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
> index 2c58200..50b32f6 100644
> --- a/arch/powerpc/kernel/pci-common.c
> +++ b/arch/powerpc/kernel/pci-common.c
> @@ -773,6 +773,29 @@ void pcibios_set_root_bus_speed(struct pci_host_bridge *bridge)
> return ppc_md.pcibios_set_root_bus_speed(bridge);
> }
>
> +static int pci_host_scan_bus(struct pci_host_bridge *host)
> +{
> + int mode = PCI_PROBE_NORMAL;
> + struct pci_bus *bus = host->bus;
> + struct pci_controller *hose = dev_get_drvdata(&host->dev);
> +
> + /* Get probe mode and perform scan */
> + if (hose->dn && ppc_md.pci_probe_mode)
> + mode = ppc_md.pci_probe_mode(bus);
> +
> + pr_debug(" probe mode: %d\n", mode);
> + if (mode == PCI_PROBE_DEVTREE)
> + of_scan_bus(hose->dn, bus);
> +
> + if (mode == PCI_PROBE_NORMAL) {
> + pci_bus_update_busn_res_end(bus, 255);
> + hose->last_busno = pci_scan_child_bus(bus);
> + pci_bus_update_busn_res_end(bus, hose->last_busno);
> + }
> +
> + return pci_bus_child_max_busnr(bus);
> +}
> +
> /* This header fixup will do the resource fixup for all devices as they are
> * probed, but not for bridge ranges
> */
> @@ -1585,6 +1608,11 @@ struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
> return of_node_get(hose->dn);
> }
>
> +static struct pci_host_bridge_ops pci_host_ops = {
> + .set_root_bus_speed = pcibios_set_root_bus_speed,
> + .scan_bus = pci_host_scan_bus,
> +};
> +
> /**
> * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
> * @hose: Pointer to the PCI host controller instance structure
> @@ -1592,9 +1620,8 @@ struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
> void pcibios_scan_phb(struct pci_controller *hose)
> {
> LIST_HEAD(resources);
> - struct pci_bus *bus;
> + struct pci_host_bridge *host;
> struct device_node *node = hose->dn;
> - int mode;
>
> pr_debug("PCI: Scanning PHB %s\n", of_node_full_name(node));
>
> @@ -1609,30 +1636,17 @@ void pcibios_scan_phb(struct pci_controller *hose)
> hose->busn.flags = IORESOURCE_BUS;
> pci_add_resource(&resources, &hose->busn);
>
> + pci_host_ops.pci_ops = hose->ops;
> /* Create an empty bus for the toplevel */
> - bus = pci_create_root_bus(hose->parent, hose->global_number,
> - hose->first_busno, hose->ops, hose, &resources);
> - if (bus == NULL) {
> - pr_err("Failed to create bus for PCI domain %04x\n",
> - hose->global_number);
> + host = pci_scan_host_bridge(hose->parent, hose->global_number,
> + hose->first_busno, hose, &resources, &pci_host_ops);
> + if (host == NULL) {
> + pr_err("Failed to create host bridge for pci%04x:%02x\n",
> + hose->global_number, hose->first_busno);
> pci_free_resource_list(&resources);
> return;
> }
> - hose->bus = bus;
> -
> - /* Get probe mode and perform scan */
> - mode = PCI_PROBE_NORMAL;
> - if (node && ppc_md.pci_probe_mode)
> - mode = ppc_md.pci_probe_mode(bus);
> - pr_debug(" probe mode: %d\n", mode);
> - if (mode == PCI_PROBE_DEVTREE)
> - of_scan_bus(node, bus);
> -
> - if (mode == PCI_PROBE_NORMAL) {
> - pci_bus_update_busn_res_end(bus, 255);
> - hose->last_busno = pci_scan_child_bus(bus);
> - pci_bus_update_busn_res_end(bus, hose->last_busno);
> - }
> + hose->bus = host->bus;
>
> /* Platform gets a chance to do some global fixups before
> * we proceed to resource allocation
> @@ -1641,9 +1655,9 @@ void pcibios_scan_phb(struct pci_controller *hose)
> ppc_md.pcibios_fixup_phb(hose);
>
> /* Configure PCI Express settings */
> - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
> + if (host->bus && !pci_has_flag(PCI_PROBE_ONLY)) {
> struct pci_bus *child;
> - list_for_each_entry(child, &bus->children, node)
> + list_for_each_entry(child, &host->bus->children, node)
> pcie_bus_configure_settings(child);
> }
> }
Download attachment "signature.asc" of type "application/pgp-signature" (861 bytes)
Powered by blists - more mailing lists